Ethylene polymerization by novel Ziegler–Natta‐type catalysts obtained in situ by the oxidative addition of 8‐hydroxyquinoline‐based ligands to bis(1,5‐cyclooctadiene)nickel(0) and methylaluminoxane

Novel catalytic systems, prepared in situ by the oxidative addition of 8‐hydroxyquinoline ligands to bis(1,5‐cyclooctadiene)nickel(0) and activated by methylaluminoxane, were studied in ethylene polymerization. When 8‐hydroxyquinoline was employed, only oligomeric products were obtained. On the contrary, 5,7‐dinitro‐8‐hydroxyquinoline gave linear polyethylene (PE), but with a modest activity. For the catalyst based on 5‐nitro‐8‐hydroxyquinoline, the productivity was largely dependent on the content of free trimethylaluminum (TMA) present in the commercial aluminoxane. The progressive optimization of the TMA/oligomeric methylaluminoxane ratio increased the productivity, which reached 700 kg of PE/(mol of Ni × h), by an order of magnitude. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 200–206, 2006     

N,N‐dimethylaminopyridine as initiator in the copolymerization of diglycidylether of bisphenol A with six‐membered cyclic carbonates

N,N‐Dimethylaminopyridine (DMAP) was used as initiator to cure mixtures of diglycidylether of bisphenol A (DGEBA) and 1,3‐dioxan‐2‐one (TMC) or 5,5‐dimethyl‐1,3‐dioxan‐2‐one (DMTMC). The curing was studied by differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the groups involved in the curing. We observed the formation of five‐membered cyclic carbonates and anionic carbonate groups that remain unreacted at the chain ends. The formation of these groups was explained by the attack of the anionic propagation species on the methylene carbon of the carbonate group, which leads to an alkyl‐oxygen rupture. By performing the cure in the thermobalance we could evaluate the loss of CO₂ produced in the samples containing carbonates. The kinetics were studied by DSC and analyzed with isoconversional procedures. The addition of carbonates slows down the curing rate. Thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA) experiments were used to evaluate the properties of the materials obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2873–2882, 2006     

Minicolumn field sampling--preconcentration of trace zinc from seawater and its laboratory detection by flow injection flame atomic absorption spectrometry.

A simple field sampling-preconcentration method for zinc determination in seawater is described. Seawater was collected in situ by pumping it through a minicolumn packed with a chelating resin (Chelite P) connected to a field flow preconcentration system (FFPS). These packed minicolumns retain the dissolved zinc, and once are loaded with the analyte, they are returned to the laboratory where they are sequentially inserted into a flow injection system for on-line zinc elution with diluted hydrochloric acid and flame atomic absorption spectrometric detection. A factorial design has been used to optimize the FFPS and the flow injection elution process. The proposed method has a linear calibration range from 0.07 to at least 9.4 microg L(-1) of zinc, with a detection limit of 0.02 microg L(-1) and a throughput of 26 samples h(-1). Validation was carried out against certified reference water samples. This procedure has been successfully applied to the determination of Zn in seawater samples from Galicia (Spain).     

Magydardiendiol,diterpenoid with a new skeleton from magydaris panacifolia (umbelliferae).

Three new diterpenoids with a substituted α-cyclogeraniol skeleton have been isolated from the umbelliferae $\text{Magydaris panacifolia}$ (Vahl) Lange, for which the names of magydar-2,13-dien-11,17-diol, $\text{1}$, magydar-2,10 (20), 13-trien-17-ol, $\text{2}$, and magydar-2,10(20), 13-trien-17-yl acetate, $\text{3}$, are proposed. The structures of these substances have been deduced from spectroscopic and chemical data.     

Liquid chromatographic retention behaviour and separation of promethazine and isopromethazine on a β-cyclodextrin bonded-phase column

A liquid chromatographic method for the separation of promethazine (PR) and its positional isomer isopromethazine (IPR) is described.PR is an N-substituted phenothiazine with the actions and the uses of the antihistamines (H1-receptor antagonists). IPR is an impurity in the pharmaceutical preparations of PR and must be controlled at a level below 1%. The liquid chromatographic behaviour of PR and IPR on a hydrolytically stable β-cyclodextrin (β-CD) column with respect to mobile phase composition, pH, ionic strength and the nature of the organic modifier was also investigated. Based on the results, conditions were chosen for the isocratic separation of the two isomers. The proposed separation method is simple and rapid and permits the simultaneous determination of PR and IPR. The separation selectivity of a cyclodextrin bonded-phase column was examined. Special attention was devoted to modelling the inclusion complexes of PR and IPR with β-CD in order to predict their optimum orientation within the β-CD cavity.     

Study of the catalytic behavior of montmorillonite/iron(III) and Mn(III) cationic porphyrins

Two samples of montmorillonite (one of Brazilian origin, BNC1 clay, and the other STX-1, supplied by the Clay Mineral Society Repository (University of Missouri, USA) were allowed to react with biomimetic metalloporphyrins of Fe(III) and Mn(III) in cationic form. The compounds were characterized by several techniques, showing that the metalloporphyrins molecules were adsorbed at the surface of the clay platelet crystals. The catalytic activities of the intercalated complexes for the oxidation of alkane were dependent upon the concentration of the porphyrin immobilized in the clay and factors such as the metal ion species in the porphyrins, choice of solvent, and concentration of the iodosylbenzene oxidant. Good selectivity to cyclohexanol instead of cyclohexanone was observed for the catalytic oxidation of cyclohexane by iodosylbenzene.     

The structures and formation of [C4H6N]+ ions 2—ion structures derived from 2-methylpropanenitrile

The loss of a hydrogen atom from ionized 2-methylpropanenitrile is preceded by a drastic rearrangement of the molecular ion. The result of this fragmentation is the generation of two stable structurally different [C₄H₆N]⁺ ions, formed via different pathways. Their structures can be established by a careful comparison of the metastable ion spectra, collision activation spectra, and charge stripping spectra from the compound and its three deuterium labeled analogues and from [C₄H₆N]⁺ ions generated from reference compounds via electron impact ionization or in selected ion/molecule reactions.     

Enhancing selectivity in oxidation catalysis with sol-gel nanocomposites

Valuable organic compounds such as alpha-hydroxy acids are easily synthesised with relevant selectivity enhancement using a sol-gel hydrophobized nanostructured silica matrix doped with the organocatalyst TEMPO: A materials science based synthetic route which cannot be achieved via classical homogeneous synthesis.     

The interphase between mercury and acetone+ nitromethane mixtures with KPF6 as a supporting electrolyte

Differential capacity and interfacial tension measurements were carried out on mercury for acetone+nitromethane mixtures with KPF₆ as a supporting electrolyte. On the basis of Gibbs adsorption equation and Guggenheim's model of the surface phase the composition of the surface layer was estimated for different acetone contents and different charges on the mercury electrode. The results obtained indicate that the positive acetone adsorption is marked at negative charges with maximum at σ_m=?0.07 C m^?2, but is practically non-existent at zero and positive charges.     

Titanosilicates as Supports for an Enzymatic Alcoholysis Reaction

Novel [Cr^III(amp)(bipy)(Cl)] (1) (H₂amp = N-(hydroxyphenyl)salicyldimine; bipy = 2,2-bipyridyl) and [Cr^III(app)(bipy)(Cl)]⁺ (2) (H₂app = N-(hydroxyphenyl)pyridine-2-carboxaldimine; bipy = 2,2-bipyridyl) complexes have been synthesized and characterized by physico-chemical methods. Complexes 1 and 2 have been employed as catalysts in the oxidation of both saturated and unsaturated hydrocarbons using tert-butylhydroperoxide (t-BuOOH). The significance of the results with respect to oxo-functionalization of C-H bonds both in unsaturated and saturated hydrocarbons is noted.