Synthesis,Photophysics and Nonlinear Optical Properties of Stilbenoid Pyrimidine‐Based Dyes Bearing Methylenepyran Donor Groups

The nonlinear properties and the photophysical behavior of two π‐conjugated chromophores that incorporate an electron‐deficient pyrimidine core (A) and γ‐methylenepyrans as terminal donor (D) groups have been thoroughly investigated. Both dipolar and quadrupolar branching strategies are explored and rationalized on the basis of the Frenkel exciton model. Even though a cooperative effect is clearly observed if the dimensionality is increased, the nonlinear optical (NLO) response of this series is moderate if one considers the nature of the D/A couple and the size of the chromophores (as measured by the number of π electrons). This effect was attributed to a disruption in the electronic conjugation within the dyes’ scaffold for which the geometry deviates from planarity owing to a noticeable twisting of the pyranylidene end‐groups. This latter structural parameter also has a strong influence on the excited‐state dynamics, which leads to a very efficient fluorescence quenching.     

Embedded passivated-electrode insulator-based dielectrophoresis (EπDEP)

Here, we introduce a new technique called embedded passivated-electrode insulator-based dielectrophoresis (EπDEP) for preconcentration, separation, or enrichment of bioparticles, including living cells. This new method combines traditional electrode-based DEP and insulator-based DEP with the objective of enhancing the electric field strength and capture efficiency within the microfluidic channel while alleviating direct contact between the electrode and the fluid. The EπDEP chip contains embedded electrodes within the microfluidic channel covered by a thin passivation layer of only 4 μm. The channel was designed with two nonaligned vertical columns of insulated microposts (200 μm diameter, 50 μm spacing) located between the electrodes (600 μm wide, 600 μm horizontal spacing) to generate nonuniform electric field lines to concentrate cells while maintaining steady flow in the channel. The performance of the chip was demonstrated using Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacterial pathogens in aqueous media. Trapping efficiencies of 100 % were obtained for both pathogens at an applied AC voltage of 50 V peak-to-peak and flow rates as high as 10 μl/min.     

Analysis of polar peptides using a silica hydride column and high aqueous content mobile phases

The retention behavior of a set of polar peptides separated on a silica hydride stationary phase was examined with a capillary HPLC system coupled to ESI‐MS detection. The mobile phases consisted of formic acid or acetic acid/acetonitrile/water mixtures with the acetonitrile content ranging from 5 to 80% v/v. The effects on peptide retention of these two acidic buffer additives and their concentrations in the mobile phase were systematically investigated. Strong retention of the peptides on the silica hydride phase was observed with relatively high‐organic low‐aqueous mobile phases (i.e. under aqueous normal‐phase conditions). However, when low concentrations of acetic acid were employed as the buffer additive, strong retention of the peptides was also observed even when high aqueous content mobile phases were employed. This unique feature of the stationary phase therefore provides an opportunity for chromatographic analysis of polar peptides with water‐rich eluents, a feature usually not feasible with traditional RP sorbents, and thus under conditions more compatible with analytical green chemistry criteria. In addition, both isocratic and gradient elution procedures can be employed to optimize peptide separations with excellent reproducibility and resolution under these high aqueous mobile phase conditions with this silica hydride stationary phase.     

Simultaneous separation of hydrophobic and polar bases using a silica hydride stationary phase

In this study, the retention behavior of selected hydrophobic and polar bases on a minimally modified silica hydride phase was investigated. From these results and the associated retention plots, significant differences in the chromatographic dependencies of these two classes of basic compounds were evident. The polar bases exhibited strong retention with mobile phases of high organic solvent content, but displayed weak retention with mobile phases of high water content. In contrast, the hydrophobic bases showed “U‐shape” retention dependencies, indicative of the interplay of both RP and normal‐phase retention characteristics. These studies have demonstrated that hydrophobic and polar bases can be simultaneously separated on the same column either under typical RP‐like or aqueous normal‐phase‐like conditions, respectively, with distinctive selectivity. Finally, the effects of temperature on the RP and aqueous normal phase modality of separations with these analytes were investigated, where discrete changes in retention behavior were also observed.     

Separation of 1,3‐dimethylamylamine and other polar compounds in a dietary supplement formulation using aqueous normal phase chromatography with MS

Five ingredients (caffeine, l ‐arginine, creatine, β‐alanine, and 1,3‐dimethylamylamine) from a workout supplement were separated by HPLC with UV detection and LC–MS using an analytical column based on silica hydride operating in aqueous normal phase mode. While RP methods were observed to be inadequate for the analysis due to low retention, aqueous normal phase chromatography was able to readily retain and resolve the analytes. After method development on the HPLC–UV system, the conditions were successfully transferred to an LC–MS system for analysis. Based on calibration curve data, estimates of 63.5, 380.3, and 13.1 mg/serving (5.50 g) were obtained for creatine, l ‐arginine, and 1,3‐dimethylamylamine, respectively. Standard addition data results were compared to those of the calibration curve study, and the two values differed by less than 1% in the case of creatine. The conditions are suitable for further development as a reliable means of quantitating the analytes in workout supplement formulations.     

Performance of hydrophobic interaction ligands for human membrane‐bound catechol‐O‐methyltransferase purification

Despite of membrane catechol‐O‐methyltransferase (MBCOMT, EC 2.1.1.6) physiological importance on catecholamines’ O‐methylation, no studies allowed their total isolation. Therefore, for the first time, we compare the performance of three hydrophobic adsorbents (butyl‐, epoxy‐, and octyl‐Sepharose) in purification of recombinant human COMT (hMBCOMT) from crude Brevibacillus choshinensis cell lysates to develop a sustainable chromatographic process. Hydrophobic matrices were evaluated in terms of selectivity and hMBCOMT's binding and elution conditions. Results show that hMBCOMT's adsorption was promoted on octyl and butyl at ≤375 mM NaH₂PO_4, while on epoxy higher concentrations (>850 mM) were required. Additionally, hMBCOMT's elution was promoted on epoxy, butyl, and octyl using respectively 0.1–0.5, 0.25–1, and 1% of Triton X‐100. On butyl media, a stepwise strategy using 375 and 0 mM NaH₂PO₄, followed by three elution steps at 0.25, 0.7 and 1% Triton X‐100, allowed selective hMBCOMT isolation. In conclusion, significant amounts of MBCOMT were purified with high selectivity on a single chromatography procedure, despite its elution occurs on multiple peaks. Although successful applications of hydrophobic interaction chromatography in purification of membrane proteins are uncommon, we proved that traditional hydrophobic matrices can open a promising unexplored field to fulfill specific requirements for kinetic and pharmacological trials.     

Ionomic profiling of Nicotiana langsdorffii wild-type and mutant genotypes exposed to abiotic stresses

To provide a new insight into the response of plants to abiotic stresses, the ionomic profiles of Nicotiana langsdorffii specimens have been determined before and after exposure to toxic metals (chromium) or drought conditions. The plants were genetically transformed with the rat glucocorticoid receptor (GR) or the gene for Agrobacterium rhizogenes rolC, because these modifications are known to produce an imbalance in phytohormone equilibria and a significant change in the defence response of the plant. Elemental profiles were obtained by developing and applying analytical procedures based on inductively coupled plasma atomic emission and mass spectrometry (ICP–AES/MS). In particular, the removal of isobaric interferences affecting the determination of Cr and V by ICP–MS was accomplished by use of a dynamic reaction cell, after optimization of the relevant conditions. The combined use of ICP atomic emission and mass spectrometry enabled the determination of 29 major and trace elements (Ba, Bi, Ca, Cd, Co, Cr, Cu, Eu, Fe, Ga, K, Li, Mg, Mn, Mo, Na, P, Pb, Pt, Rb, S, Sb, Sn, Sr, Te, V, W, Y, and Zn) in different parts of the plants (roots, stems, and leaves), with high accuracy and precision. Multivariate data processing and study of element distribution patterns provided new information about the ionomic response of the target organism to chemical treatment or water stress. Genetic modification mainly affected the distribution of Bi, Cr, Mo, Na, and S, indicating that these elements were involved in biochemical processes controlled by the GR or rolC genes. Chemical stress strongly affected accumulation of several elements (Ba, Ca, Fe, Ga, K, Li, Mn, Mo, Na, P, Pb, Rb, S, Sn, Te, V, and Zn) in different ways; for Ca, Fe, K, Mn, Na, and P the effect was quite similar to that observed in other studies after treatment with other transition elements, for example Cu and Cd. The effect of water deficit was less evident, mainly consisting in a decrease of Ba, Cr, Na, and Sr in roots.

Analysis of egg-based model wall paintings by use of an innovative combined dot-ELISA and UPLC-based approach

The chemical analysis of egg-based wall paintings—the mezzo fresco technique—is an interesting topic in the characterisation of organic binders. A revised procedure for a dot-enzyme-linked immunosorbent assay (dot-ELISA) able to detect protein components of egg-based wall paintings is reported. In the new dot-ELISA procedure we succeeded in maximizing the staining colour by adjusting the temperature during the staining reaction. Quantification of the colour intensity by visible reflectance spectroscopy resulted in a straight line plot of protein concentration against reflectance in the wavelength range 380–780 nm. The modified dot-ELISA procedure is proposed as a semi-quantitative analytical method for characterisation of protein binders in egg-based paintings. To evaluate its performance, the method was first applied to standard samples (ovalbumin, whole egg, egg white), then to model specimens, and finally to real samples (Giotto’s wall paintings). Moreover, amino acid analysis performed by innovative ultra-performance liquid chromatography was applied both to standards and to model samples and the results were compared with those from the dot-ELISA tests. In particular, after protein hydrolysis (24 h, 114 °C, 6 mol L^?1 HCl) of the samples, amino acid derivatization by use of 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate enabled reproducible analysis of amino acids. This UPLC amino acid analysis was rapid and reproducible and was applied for the first time to egg-based paintings. Because the painting technique involved the use of egg-based tempera on fresh lime-based mortar, the study enabled investigation of the effect of the alkaline environment on egg-protein detection by both methods.