Kinetic and mechanistic studies on the reaction of nitric oxide with a water-soluble octa-anionic iron(III) porphyrin complex

The polyanionic water-soluble and non-mu-oxo-dimer-forming iron porphyrin iron(III) 5(4),10(4),15(4),20(4)-tetra-tert-butyl-5(2),5(6),15(2),15(6)-tetrakis[2,2-bis(carboxylato)ethyl]-5,10,15,20-tetraphenylporphyrin, (P(8-))Fe(III) (1), was synthesized as an octasodium salt by applying well-established porphyrin and organic chemistry procedures to bromomethylated precursor porphyrins and characterized by standard techniques such as UV-vis and (1)H NMR spectroscopy. A single pK(a1) value of 9.26 was determined for the deprotonation of coordinated water in (P(8-))Fe(III)(H(2)O)(2) (1-H(2)()O) present in aqueous solution at pH <9. The porphyrin complex reversibly binds NO in aqueous solution to give the mononitrosyl adduct, (P(8-))Fe(II)(NO(+))(L), where L = H(2)O or OH(-). The kinetics of the binding and release of NO was studied as a function of pH, temperature, and pressure by stopped-flow and laser flash photolysis techniques. The diaqua-ligated form of the porphyrin complex binds and releases NO according to a dissociative interchange mechanism based on the positive values of the activation parameters DeltaS() and DeltaV() for the "on" and "off" reactions. The rate constant k(on) = 6.2 x 10(4) M(-1) s(-1) (24 degrees C), determined for NO binding to the monohydroxo-ligated (P(8-))Fe(III)(OH) (1-OH) present in solution at pH >9, is markedly lower than the corresponding value measured for 1-H(2)O at lower pH (k(on) = 8.2 x 10(5) M(-1) s(-1), 24 degrees C, pH 7). The observed decrease in the reactivity is contradictory to that expected for the diaqua- and monohydroxo-ligated forms of the iron(III) complex and is accounted for in terms of a mechanistic changeover observed for 1-H(2)O and 1-OH in their reactions with NO. The mechanistic interpretation offered is further substantiated by the results of water-exchange studies performed on the polyanionic porphyrin complex as a function of pH, temperature, and pressure.     

Preparation of an eight-membered sesquiterpene lactone resulting from sequential Gif System GoAgg(III) and MCPBA oxidation of (+)-10beta,14-dihydroxy-allo-aromadendrane

Studies aimed at a comparison of chemical, biomimetic (Gif system GoAgg(III))and enzymatic (CHMO) transformations of natural (+)-10beta,14-dihydroxy-allo-aromadendrane have led to preparation of an eight-member sesquiterpene lactone.     

Metal complexes of phytohormones. Part II. Copper(II) complexes of 6-benzylaminopurine

Summary Copper(II) complexes with 6-benzylaminopurine (BAPH) of the types Cu(BAPH)₂(ClO₄)₂·2H₂O (1) Cu(BAP)₂·4H₂O (2), and Cu(BAPH₂)Cl₃·MeOH (3), have been synthesized and characterized by conductivity, magnetic measurements, i.r., electronic and e.s.r. spectroscopy.     

On the Reaction of Triaryl Trithioarsenites, (ArS)3As,with Octasulfur

para‐Substituted with electron donating or electron withdrawing groups triphenyl trithioarsenites, (ArS)₃As, and octasulfur in refluxing carbon disulfide or chloroform do not give the triaryl tetrathioarsenates, (ArS)₃As=S, as was claimed in the literature for tris(4‐methylphenyl) tetrathioarsenate. In some cases oxidative decomposition to As₂O₃ and disulfides ArSSAr was found. When equivalent amounts of the same esters and octasulfur were heated at 105 or 150 °C no As^V compound was detected or isolated and again some esters decomposed to As₂O₃ and disulfides. These experiments demonstrated that the aromatic trithioarsenites do not react with octasulfur, probably because they cannot open the octasulfur ring. These esters in solution react with octasulfur in the presence of a catalytic (10—20 mol%) amount of triethylamine giving disulfides, As₂O₃ and colored solids which could not be characterized.     

Separation and analysis of the major constituents of cloves by micellar electrokinetic chromatography

A micellar electrokinetic chromatographic method was developed and applied for the first time to the separation and quantification of the main components of cloves, namely eugenol and beta-caryophyllene. The analytes were separated in less than ten minutes in an unmodified fused silica capillary (effective length: 40.0 cm) using a background electrolyte composed of 25 mM carbonate buffer (pH 10.0) and 60 mM sodium dodecylsulfate. Analyte concentrations were determined in clove oil and in methanolic clove extracts after simple sequential dilution with methanol and background electrolyte, and the resulting electropherograms showed no interference due to other components. Precision assays gave satisfactory results, with mean standard deviation of peak areas lower than 4.7% (lower than 1.5% for migration times). The eugenol content of a commercial clove oil was about 70% (RSD% = 3.2), while that of beta-caryophyllene was about 15% (RSD% = 4.2); in clove extracts, on the other hand, eugenol was approximately 15% (RSD% = 4.7) and beta-caryophyllene 4% (RSD% = 5.1). Accuracy was also good (mean recovery >98%).     

Ecdysteroid glycosides: identification, chromatographic properties, and biological significance

Ecdysteroid glycosides are found in both animals and plants. The chromatographic behavior of these molecules is characteristic, as they appear much more polar than their corresponding free aglycones when analyzed by normal-phase high-performance liquid chromatography (HPLC), whereas the presence of glycosidic moieties has a very limited (if any) impact on polarity when using reversed-phase HPLC. Biological activity is greatly reduced because the presence of this bulky substituent probably impairs the interaction with ecdysteroid receptor(s). 2-Deoxy-20-hydroxyecdysone 22-O-beta-D-glucopyranoside, which has been isolated from the dried aerial parts of Silene nutans (Caryophyllaceae), is used as a model compound to describe the rationale of ecdysteroid glycoside purification and identification.     

Peak compression effects in capillary electrochromatography of basic drug substances using a strong cation-exchanger

Peak compression effects in capillary electrochromatography of basic drug substances using a strong cation-exchanger have been studied. Extremely narrow peaks with apparent efficiencies of several million plates per meter could be obtained when the composition of the sample zone differed from that of the mobile phase. The increased efficiencies were predominately observed when the analyte had an elution time similar to that of the electroosmotic flow marker. Peak compression was found to be reproducible and could be obtained for all investigated basic drug substances by altering the composition of the mobile phase in such a way that the analyte co-eluted with the sample zone. An explanation of the observed phenomena is proposed. A sample zone differing in composition from the mobile phase will disturb the equilibrium between the stationary and mobile phase. The elution rate of an analyte will consequently be different when residing inside the sample zone. If the analyte migrates through the sample zone at a higher speed than the rest of the mobile phase and is strongly retained after passing through a boundary in the sample zone, a continuous stacking can be obtained trapping the analyte as a very narrow band.     

The Dienone–Phenol Rearrangement of Santonin: A Comprehensive Laboratory Experiment for Advanced Undergraduate Organic Chemistry Students

A comprehensive laboratory experiment suitable for advanced undergraduate organic chemistry students has been designed. The experiment is based on the dienone-phenol rearrangement reaction of the sesquiterpene santonin to give -desmotroposantonin acetate. It challenges students to solve an earlier controversial stereochemical problem. The students carry out the reaction and analyze spectroscopic data to determine the stereochemistry of the starting material and the product. In addition, they perform simple molecular modeling calculations, which enable them to rationalize the stereochemical outcome of the transformation and discuss the mechanism of the dienone-phenol rearrangement and related rearrangements reported in the literature.     

Potentiometric, luminescence and NMR study of the interaction of Eu with glyceryl phosphates

Complexation of europium(III) with glyceryl-1- and -2-phosphates has been studied by metal ion luminescence, ¹H and ¹³C NMR spectroscopy and potentiometry. From the luminescence and NMR studies, the formation of a 1:1 inner-sphere complex, in which the glyceryl phosphate is directly bound to the metal, is confirmed. Similar apparent binding constants at pH 2 were obtained by the three methods. Values obtained by NMR at pH 2 are 53 M⁻¹ and 12 M⁻¹ for glyceryl-1- and -2-phosphate, respectively. By comparison with literature data on related systems it is suggested that the ligands bind through the phosphate group. To obtain structural information from the NMR data, complexation has also been studied with the lanthanide ions Dy(III), Er(III) and Gd(III) using both chemical shift and relaxation data. From this, metal-proton distance ratios have been calculated. Comparison of ¹H and ¹³C NMR spectral data in the presence of paramagnetic lanthanides suggests conformational equilibria in the solutions. From the potentiometric studies, global formation constants have been determined, and speciation diagrams obtained over the pH range 1.5pH7.0 for ligand/metal ratios of 1 and 30. Implications of these results on lanthanide induced fusion of phospholipid membranes are discussed.     

Application of fluorescence reactions in the ring oven segment technique

Summary The ring oven segment technique already described earlier has been applied to the determination of ng- tog-amounts of organic and inorganic substances using fluorescence reactions. The methods proposed here are based either on self-fluorescence or on appearance or disappearance of fluorescence following a chemical reaction.

---

Anwendung von Fluoreszenzreaktionen in der Ringofen-Segmenttechnik

Zusammenfassung Die bereits früher beschriebene Ringofen-Segmenttechnik wurde auf die Bestimmung organischer und anorganischer Substanzen im ng- bisg-Bereich mit Hilfe von Fluoreszenzreaktionen angewendet. Die hier vorgeschlagenen Methoden beruhen entweder auf Eigenfluoreszenz oder aber auf der Bildung bzw. dem Verschwinden von Fluoreszenz nach einer chemischen Reaktion.