Liquid chromatographic retention behaviour and separation of promethazine and isopromethazine on a β-cyclodextrin bonded-phase column

A liquid chromatographic method for the separation of promethazine (PR) and its positional isomer isopromethazine (IPR) is described.PR is an N-substituted phenothiazine with the actions and the uses of the antihistamines (H1-receptor antagonists). IPR is an impurity in the pharmaceutical preparations of PR and must be controlled at a level below 1%. The liquid chromatographic behaviour of PR and IPR on a hydrolytically stable β-cyclodextrin (β-CD) column with respect to mobile phase composition, pH, ionic strength and the nature of the organic modifier was also investigated. Based on the results, conditions were chosen for the isocratic separation of the two isomers. The proposed separation method is simple and rapid and permits the simultaneous determination of PR and IPR. The separation selectivity of a cyclodextrin bonded-phase column was examined. Special attention was devoted to modelling the inclusion complexes of PR and IPR with β-CD in order to predict their optimum orientation within the β-CD cavity.     

High-performance liquid chromatographic determination of Levetiracetam in human plasma: comparison of different sample clean-up procedures

An accurate and precise high-performance liquid chromatographic method using diode array detection for the determination of the novel antiepileptic, Levetiracetam, has been developed. Three clean-up procedures for the analysis of Levetiracetam in human plasma were implemented and evaluated, namely solid-phase extraction, deproteinization by addition of organic solvents and formation of insoluble salts. Adenosine was used as the internal standard for all three sample pretreatment procedures. Among the several cartridges used for solid-phase extraction, the hydrophilic-lypophilic balance (Oasis) HLB) phase provides the best extraction yield of Levetiracetam, together with high precision. With the two other clean-up procedures involving plasma deproteinization by addition of methanol or zinc sulphate, lower sensitivity and precision of the assays were obtained. However, they are cheaper and faster when compared with the solid-phase extraction procedure.     

Tantalum Clusters in Oxidic Matrices — Synthesis,Crystal Structure and Magnetic Properties of Eu1.83Ta15O32

The mixed‐valent oxotantalate Eu_1.83Ta₁₅O₃₂ was prepared from a compressed mixture of Ta₂O₅ and the metals in a sealed Ta ampoule at 1400 °C. The crystal structure was determined by means of single crystal X‐ray diffraction: space group R3¯, a = 777.2(6) pm and c = 3523.5(3) pm, Z = 3, 984 symmetrically independent reflections, 83 variables, R_F = 0.027 for I > 2σ (I). The structure is isotypic to Ba₂Nb₁₅O₃₂. The salient feature is a [Ta(+8/3)₆O₁₂ⁱO₆^a] cluster consisting of an octahedral Ta₆ core bonded to 12 edge‐bridging inner and six outer oxygen atoms. The clusters are arranged to slabs which are sandwiched by layers of [Ta(+5)₃O₁₃] triple octahedra. Additional Ta(+5) and Eu(+2) atoms provide the cohesion of these structural units. Twelve‐fold coordinated Eu(+2) atoms are situated on a triply degenerate position 33 pm displaced from the threefold axis of symmetry. A depletion of the Eu(+2) site from 6 to 5.5 atoms per unit cell reduces the number of electrons available for Ta‐Ta bonding from 15 to 14.67 electrons per cluster. Between 125 and 320 K Eu_1.83Ta₁₅O₃₂ is semi‐conducting with a band gap of 0.23 eV. The course of the magnetization is consistently described with the Brillouin function in terms of a M_mol/(N_Aμ_B) versus B/T plot in the temperature range 5 K — 320 K and at magnetic flux densities 0.1 T — 5 T. At moderate flux densities (< 1 T) the magnetic moment agrees fairly well with the expected value of 7.94 μ_B for free Eu (2+) ions with 4f⁷ configuration in ⁸S_7/2 ground state. Below 5 K, anisotropic magnetization measurements at flux densities B < 1 T point to an onset of an antiferromagnetic ordering of Eu spins within the layers and an incipient ferromagnetic ordering perpendicular to the layers.     

Primate beta-defensins--structure, function and evolution

Host defense peptides (HDPs) are endogenous antibiotics that play a multifunctional role in the innate immunity of mammals. Among these, beta-defensins contribute to mucosal and epithelial defense, also acting as signal molecules for cellular components of innate and adaptive immunity. Numerous members of this family have been identified in mammalian and avian species, and genomic studies in human and mouse indicate a considerable complexity in their gene organization. Recent reports on the evolution of primate and rodent members of this family indicate quite a complex pattern of variation. In this review we briefly discuss the evolution of mammalian beta-defensins in relation to other types of defensins, and then concentrate on the evolution of beta-defensins 1 to 4 in primates. In particular, the surprisingly varied patterns of evolution, which range from neutral or weakly purifying, to positive selection to a high level of conservation are analyzed in terms of possible genetics, structural or functional implications, as well as to observed variations on the antimicrobial activity in vitro. The role of polymorphisms in the genes encoding for these host defense peptides in determining susceptibility to human diseases are also briefly considered.     

Effects of Aerosol-OT reversed micelles in carbon tetrachloride on acid-base indicator equilibria

ApparentpK _a values of thymol blue solubilized in Aerosol-OT reversed micelles in carbon tetrachloride at 25 °C were determined spectrophotometrically. The effects of the Aerosol-OT concentration and the (water)/(surfactant)R ratio were investigated. The apparentpK _a values increase as a function of increasing (R). All the measuredpK _a values are less than that in water. The decrease ranges from 1.23 units (detergent=0.4 M,R=1.39) to 0.42 units (Aerosol-OT=0.6 M,R=9,25). These results are rationalized in terms of decreased hydronium ion activity in the micellar core due to its binding to the detergent SO₃ ^? groups.     

Preparation of cellulose samples for size-exclusion chromatography analyses in studies of paper degradation

Hydrolytic degradation of cellulose was shown to take place during the activation procedure in distilled water during the dissolution procedure of cellulose samples from papers for size-exclusion chromatography analyses in the lithium chloride-N,N-dimethylacetamide (DMAc) solution system. The use of dilute aqueous sodium hydroxide solution in the activation procedure prevents hydrolytic degradation of cellulose during the dissolution procedure, especially in the case of samples of aged papers with low pH. The use of the freeze-drying technique provides samples of cellulose ready-made for dissolution in lithium chloride-N,N-dimethylacetamide solution.     

Copolymerization of ethylene and non-conjugated diene using homogenous catalyst

Ethylene and different amounts of 1,7-octadiene were copolymerized using the metallocene catalyst system ethylidene-bis(fluorenyl) zirconium dichloride and methylaluminoxane (MAO) at both 50 and 90 °C. The catalyst activity has slightly increased with the addition of low amounts of the diene in relation to the homopolymerization of ethylene. The obtained polymers were characterized according to their melting temperature (T_m) and crystallinity degree (x_c) by differential scanning calorimetry (DSC). Weight-average molecular weight (M_w) and polydispersity were determined by gel permeation chromatography (GPC). Diene contents in the copolymer were obtained through the FTIR spectroscopy. The results indicated that at polymerization temperature of 90 °C, crosslinking bonds in the obtained copolymers were low, differently from what was observed at 50 °C. The diene content in the copolymer achieved more than 3 mol% and the comonomer conversion was around 15%. Moreover, the obtained copolymers have M_w around 100,000 and large polydispersity.     

Proton controlled intramolecular communication in dinuclear ruthenium(II) polypyridine complexes

The synthesis and characterization of two dinuclear ruthenium polypyridyl complexes based on the bridging ligands 5,5'-bis(pyridin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and 5,5'-bis(pyrazin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and of their mononuclear precursors are reported. The dinuclear compounds have been prepared by a Ni(0) catalyzed coupling of a mononuclear ruthenium(II) polypyridyl complex containing a brominated triazole moiety. Electrochemical and photophysical studies indicate that, in these dinuclear complexes, the protonation state of the bridge may be used to tune the intercomponent interaction between the two metal centers and that these species act as proton driven three-way molecular switches that can be read by electrochemical or luminescence techniques.     

Specific surface of two hydrated cements differing in strength

Specific surface, S, of CSH-gel particles of disordered layered structure, was studied by water sorption/retention in two cement pastes differing in strength, i.e. C-33 (weaker) and C-43 (stronger), w/c=0.4. Hydration time in liquid phase was t _h=1 and 6 months, followed by hydration in water vapour either on increasing stepwise the relative humidity, RH=0.5→0.95→1.0 (WS) or on its lowering in an inverse order (WR). Specific surface was estimated from evaporable (sorbed) water content, EV (110°C), assuming a bi- and three-molecular sorbed water layer at RH=0.5 or 0.95, respectively (WS). On WR it was three- and three- to four-molecular (50 to 75%), respectively, causing a hysteresis of sorption isotherm. At RH=0.5 the S increased with cement strength from 146 m² g^-1 (C-33, 1 m) to 166 m² g^-1 (C-43, 1 m) and with hydration time to 163 (C-33, 6 m) and to 204 m² g^-1 (C-43, 6 m). At RH=1.0 (and 0.95), higher S-value were measured but these differences were smaller: S amounted to 190-200 m² g^-1 in C-33 (1 and 6 m) and 198-210 m² g-1 in C-43 (1 and 6 m). Thus no collapse occurred on air drying of paste C-43 (6 m). This revised version was published online in July 2006 with corrections to the Cover Date.     

Non-linear dielectric effect in the acetone-benzene and acetophenone-benzene systems

The non-linear dielectric effect has been studied for acetone and acetophenone, and their solutions in benzene. With the NDE results obtained in this work and the dielectric polarization calculated from literature values of the permittivity, density and refractive index, the mean values of the square and the fourth power of the dipole moment were calculated. Assuming dipolar association of the acetone and acetophenone molecules to be restricted to dimerization, the Gibbs free energy ΔG^o of the dimerization process is determined.