Titanosilicates as Supports for an Enzymatic Alcoholysis Reaction

Novel [Cr^III(amp)(bipy)(Cl)] (1) (H₂amp = N-(hydroxyphenyl)salicyldimine; bipy = 2,2-bipyridyl) and [Cr^III(app)(bipy)(Cl)]⁺ (2) (H₂app = N-(hydroxyphenyl)pyridine-2-carboxaldimine; bipy = 2,2-bipyridyl) complexes have been synthesized and characterized by physico-chemical methods. Complexes 1 and 2 have been employed as catalysts in the oxidation of both saturated and unsaturated hydrocarbons using tert-butylhydroperoxide (t-BuOOH). The significance of the results with respect to oxo-functionalization of C-H bonds both in unsaturated and saturated hydrocarbons is noted.     

Determination of salicylate in blood serum using an amperometric biosensor based on salicylate hydroxylase immobilized in a polypyrrole-glutaraldehyde matrix

The use of an amperometric biosensor for the salicylate determination in blood serum is described. The biosensor is based on salicylate hydroxylase (EC 1.14.13.1) electropolymerized onto a glassy carbon-working electrode with polypyrrole and glutaraldehyde, to improve the biosensor lifetime. The hexacyanoferrate (II) was also incorporated to work as a redox mediator to minimize possible interferences. The salicylate is enzymatically converted to catechol, which is monitored amperometrically by its electrooxidation at+0.170 V versus SCE (saturated calomel electrode). Salicylate determination was carried out maintaining the ratio between beta-NADH and salicylate at 4:1 (30 degrees C). The amperometric response of the biosensor was linearly proportional to the salicylate concentration between 2.3x10(-6) and 1.4x10(-5) mol l(-1), in 0.1 mol l(-1) phosphate buffer (pH 7.8), containing 0.1 mol l(-1) KCl and 5.0x10(-4) mol l(-1) Na(2)H(2)EDTA, as supporting electrolyte. The recovery studies, in the presence of several interfering compounds, showed recoveries between 96.4 and 104.8%. The useful lifetime of the biosensor in the concentration range evaluated was at least 40 days, in continuous use. Blood serum samples analyzed by this biosensor showed a good correlation compared to the spectrophotometric method (Trinder) used as reference, presenting relative deviations lower than 7.0%.     

Ion chromatographic separation of car☐ylic acids prediction of retention data

The retention behavior of biologically relevant monovalent (formic, acetic, propionic, lactic and pyruvic) and divalent (oxalic, malonic, succinic, fumaric, maleic and tartaric acids) car☐ylic acids together with inorganic analytes (chloride and sulphate) has been studied. The separation was performed on a latex-based strong anion-exchange resin using carbonate buffer systems in suppressed IC. The retention behaviour of analytes was investigated at different pH values and [HCO₃⁻]+[CO₃²⁻] concentrations. A theoretical model, involving ion-exchange equilibria of sample and eluent anions, was derived and applied to the chromatographic data obtained. Chromatographic ion exchange selectivity values were determined and retention data were calculated for the anions using different carbonate eluent conditions. The average of errors between the predicted and the measured retention volumes of the analytes studied does not exceed 4.0%. The study effectively characteristics the behaviour of different analytes under elution conditions of practical importance.     

Hydrocarbons from synthesis gas; effect of Mg addition over Pd impregnated silica-alumina catalysts

The effect of Mg addition to Pd impregnated silica-alumina catalysts and the behavior of these catalysts in synthesis gas to hydrocarbons transformation have been studied. Measurements of H₂ chemisorption and temperature programmed NH₃ desorption allow us to consider that Mg addition to Pd containing catalysts increases the Pd dispersity, the support acidity not being modified. The presence of Mg enhances hydrocarbon production. Meanwhile, the hydrocarbon distribution is not modified. A large amount of light alkanes in the reaction products is obtained.     

Analysis of sediments for heavy metals by a rapid electrothermal atomic-absorption procedure

A rapid electrothermal atomic-absorption spectrophotometric procedure with homogenization as the only pretreatment is compared with two wet pretreatment methods followed by flame atomic-absorption, in a statistically designed experiment. Samples from the top 5 cm of sediments at three different points of the Tejo estuary were used for the tests. The results show that the electrothermal procedure performed as well as whichever was the better of the flame methods for the determination of cadmium and nickel, irrespective of the sand content of the samples; although not statistically significant, there was apparently a decrease in recovery for chromium, copper and lead by the electrothermal method as the sand content of the sample increased. For zinc the electrothermal method gave results statistically different from those of the flame procedures when the sand content was high but not when the organic content of the sample was high. Because of the limited degree of replication (5 variates) the relative differences between the average values obtained by the three methods were significant only if they exceeded 15%. The electrothermal method has the advantage of substantially greater speed.     

Proton-ionizable crown compounds. 11. Synthesis of macrocyclic ligands containing two sulfonamide groups and chloro substituents or pyridine subcyclic units and a preliminary study of cation transport by three of these ligands

Five new macrocyclic ligands each containing two sulfonamide groups have been prepared. Three of these compounds contain one or two chloro substituents and the other two have one or two pyridine subcyclic units. A seventeen-membered ring ligand (4) was found to be an excellent transport agent for all alkali metal cations in a water-methylene chloride-water bulk liquid membrane system when the pH of the source phase was 13 or higher. The chlorine-substituted analog (5) was a poor transport agent for the alkali metal cations possibly because the chlorine atom blocked entry to the macrocycle cavity. An open-chain analog containing two sulfonamide groups was particularly effective in transporting cesium ions.     

A study of method robustness for arsenic speciation in drinking water samples by anion exchange HPLC-ICP-MS

Regulating arsenic species in drinking waters is a reasonable objective, since the various species have different toxicological impacts. However, developing robust and sensitive speciation methods is mandatory prior to any such regulations. Numerous arsenic speciation publications exist, but the question of robustness or ruggedness for a regulatory method has not been fully explored. The present work illustrates the use of anion exchange chromatography coupled to ICP-MS with a commercially available "speciation kit" option. The mobile phase containing 2 mM NaH(2)PO(4) and 0.2 mM EDTA at pH 6 allowed adequate separation of four As species (As(III), As(V), MMAA, DMAA) in less than 10 min. The analytical performance characteristics studied, including method detection limits (lower than 100 ng L(-1) for all the species evaluated), proved the suitability of the method to fulfill the current regulation. Other parameters evaluated such as laboratory fortified blanks, spiked recoveries, and reproducibility over a certain period of time produced adequate results. The samples analyzed were taken from water utilities in different areas of the United States and were provided by the U.S. EPA. The data suggests the speciation setup performs to U.S. EPA specifications but sample treatment and chemistry are also important factors for achieving good recoveries for samples spiked with As(III) as arsenite and As(V) as arsenate.     

Aroma composition of red wines by different extraction methods and Gas Chromatography-SIM/MASS spectrometry analysis

One hundred and one volatile compounds, reported in literature as powerful odorants of wine, were quantified by Gas Chromatography-Selective Ion Monitoring/Mass Spectrometry (GC-SIM/MS) in Primitivo, Aglianico, Merlot and Cabernet Sauvignon red wines. Wine samples were extracted by 3 different extraction methods: 1) separation of the alcoholic fraction from the aqueous phase by salting-out and subsequent extraction by liquid-liquid micro-extraction with 1,1,2-trichlorotrifluoroethane (Freon 113); 2) extraction by liquid-liquid micro-extraction with dichloromethane; 3) solid phase extraction (SPE cartridge: 800 mg of LiChrolut EN resin) with pentane-dichloromethane (20:1) and dichloromethane. The selection of the ion fragments used for quantification was directly performed on a red wine sample. For each compound the area of the corresponding peak was normalized respect to the peak of the internal standard and then interpolated in a calibration curve obtained analysing a model wine solution (water, ethanol, tartaric acid and known amounts of analytes and of internal standard). The methods showed a good linearity: r2>0.990, except for farnesol (isomer a and c), octanal, decanal, furaneol and phenylacetic acid with 0.966 < or = r2 < or = 0.990. The 7 most powerful odorants were: beta-damascenone, acetaldehyde, maltol, ethyl 2-methylbutanoate, ethyl 3-methylbutanoate, 3-methylbutanoic acid and acetal; 7 other slightly less important were: ethyl hexanoate, ethyl acetate, 1-octen-3-ol, butanoic acid, rose oxide, furaneol and sotolon. The Aglianico wines were characterised by the major fermentation compounds (esters, fatty acids and 2-phenylethanol), beta-damascenone, beta-ionone and linalool. The Primitivo wines were characterized by furaneol, methoxypyrazine, gamma-nonalactone and acetaldehyde, while Cabernet Sauvignon and Merlot wines principally by cask derivates (vanillin, (Z) 3-methyl-gamma-octalactone [(Z) wiskylactone], maltol and eugenol), some aldehydes and 3-isopropyl-2-methoxypyrazine.     

Conformational and photophysical studies on porphyrin-containing donor-bridge-acceptor compounds. Charge separation in micellar nanoreactors

Photophysical studies with semi-rigid, 1, and flexible, 2, donor-bridge-acceptor (D-b-A2+) molecules with D a porphyrin and A2+ a methyl viologen moiety, were performed in neat polar solvents as well as included in surfactant (DTAB) aqueous and in reverse AOT/n-alkane micelles. The micelles acted as nanoreactors for the photoinduced electron transfer reaction upon laser excitation. In spite of the longer lifetime of the charge separated (CS) state in the semi-rigid tetrad 1(ca. 200 ns vs. ca. 100 ns for the flexible dyad 2), the CS formation quantum yield, for example in acetonitrile, was lower for the former (phi(CS) = 0.13) than for the latter (0.58). Comparison of the time-resolved fluorescence data in neat solvent and in the micelles yielded the phi(CS) values in the dilute micellar solutions. Application of laser-induced optoacoustic spectroscopy at various temperatures to 1 dissolved in a polar organic solvent (benzonitrile, BZN) included in aqueous DTAB nanoreactors afforded structural volume changes for the production in hundreds of ps of the CS state upon excitation of a polar molecule. The contraction during CS formation upon excitation of the collapsed conformer in BZN is attributed to the entering of solvent into the open molecular cavity. The opening upon formation of the CS state due to photoinduced electron transfer in the 1 collapsed conformation arises from the repulsion of the two positively charged ends in this state, as previously calculated. Inclusion of 1 in reverse AOT micelles in various n-alkanes also led to a contraction upon excitation, but the data had much more error due to the limited range of variability of the ratio of thermoelastic parameters. The data obtained with the more flexible "supermolecule" 2 showed the predicted large conformation flexibility of these molecules.     

Radionuclide X-ray fluorescence analysis of drinking water using preconcentration of trace metals on chelating cellulose exchanger OSTSORB-OXIN

Determination of Cr, Fe, Cu, Zn and Pb in drinking water preconcentrated on a chelating ion exchanger of Czechoslovak production is described. The analytical system consisted of a radionuclide source²³⁸Pu, a Si/Li semiconductor detector and a multichannel analyzer. Results are compared with trehshold limit values recommended for drinking water.