Three-dimensional quantitative structure-activity relationships of steroid aromatase inhibitors

Summary Inhibition of aromatase, a cytochrome P450 that converts androgens to estrogens, is relevant in the therapeutic control of breast cancer. We investigate this inhibition using a three-dimensional quantitative structure-activity relationship (3D QSAR) method known as Comparative Molecular Field Analysis, CoMFA [Cramer III, R.D. et al., J. Am. Chem. Soc., 110 (1988) 5959]. We analyzed the data for 50 steroid inhibitors [Numazawa, M. et al., J. Med. Chem., 37 (1994) 2198, and references cited therein] assayed against androstenedione on human placental microsomes. An initial CoMFA resulted in a three-component model for log(1/K_i), with an explained variance r² of 0.885, and a cross-validated q² of 0.673. Chemometric studies were performed using GOLPE [Baroni, M. et al., Quant. Struct.-Act. Relatsh., 12 (1993) 9]. The CoMFA/GOLPE model is discussed in terms of robustness, predictivity, explanatory power and simplicity. After randomized exclusion of 25 or 10 compounds (repeated 25 times), the q² for one component was 0.62 and 0.61, respectively, while r² was 0.674. We demonstrate that the predictive r² based on the mean activity (Y_m) of the training set is misleading, while the test set Y_m-based predictive r² index gives a more accurate estimate of external predictivity. Using CoMFA, the observed differences in aromatase inhibition among C6-substituted steroids are rationalized at the atomic level. The CoMFA fields are consistent with known, potent inhibitors of aromatase, not included in the model. When positioned in the same alignment, these compounds have distinct features that overlap with the steric and electrostatic fields obtained in the CoMFA model. The presence of two hydrophobic binding pockets near the aromatase active site is discussed: a steric bulk tolerant one, common for C4, C6-alpha and C7-alpha substitutents, and a smaller one at the C6-beta region.     

The synthesis and reactivity of the heptanuclear dianion [Os7(CO)20]2− including the synthesis and structural characterizations of the compounds [Os7(CO)20(AuPEt)3 2] and [Os8(CO)20(η6-C6H6]

Reduction of the heptaosmium cluster [Os₇(CO)₂₁] With [Et₄N][NH₄) gives the cluster dianion [Os₇(CO)₂₀]^2–,1, in high yield. The reaction of the dianion with [AuPR ₃Cl] (R=Et or Ph) in the presence of TlPF₆ forms [Os₇((CO)₂₀(AuPR ₃)₂] [R=Et (2a);R = Ph(2b)] in 80% yield, while the corresponding reaction with (Os(C₆H₆)(CH₃CN)₃]²⁺ gives [Os₈(CO)₂₀ ( ⁶-C₆H₆)] (3) in reasonable yield (ca. 30%). The dianion,1, and the clusters2 and3 have been fully characterized by bout spectroscopic and crystallographic methods. The crystal structure of the [Ph₄P]⁺ salt of1 shows that the metals in the anion adopt a capped octahedral geometry, with all twenty carbonyl ligands in terminal sites. The metal core geometry in2a is best described as a tricapped octahedron, and is based on the structure of the dianion1 with two adjacent octahedral faces capped by the Au atoms of the two AuPEt₃ groups. In a similar fashion, the geometry of3 is related to that of1 with the addition of an Os(C₆H₆) unit capped to a triangular face, to give a bicapped octahedral framework.     

Anion-pi interactions in cyanuric acids: a combined crystallographic and computational study

Several structures of pi complexes of isocyanuric acid and of several thio derivatives with anions have been computed by using high level ab initio calculations. The nature of the complexes has been studied by means of the method of molecular interaction potential with polarization (MIPp) and Bader's theory of atoms-in-molecules. These molecules form favorable complexes with anions and can be used as binding units for building receptors for the molecular recognition of anions. In several cases, the anion-pi interaction has been demonstrated experimentally by means of X-ray crystallography.     

Incorporation conditions guiding the aggregation of a glycosylphosphatidyl inositol (GPI)-anchored protein in Langmuir monolayers

This work investigates the process of incorporation of a glycosylphosphatidyl inositol (GPI)-anchored alkaline phosphatase into Langmuir monolayers of dimyristoyl phosphatidic acid (DMPA). Three different methods of protein incorporation were assayed. When the protein solution was injected below the air–water interface after formation of the lipid monolayer a micro-heterogeneous distribution of alkaline phosphatase throughout the interface was observed. Adsorption kinetics studied by fluorescence microscopy, associated with surface pressure measurements, led to the proposition of a model in which the protein penetration is modulated by the surface packing of the monolayer and intermolecular interactions occurring between the phospholipid and the protein. At initial surface pressures higher than 20 mN m⁻¹, the protein is quickly adsorbed on the interface and the lateral diffusion drives the alkyl chains to turn towards the air phase while the polypeptide moiety faces the aqueous subphase.     

Aquatic degradation of triclosan and formation of toxic chlorophenols in presence of low concentrations of free chlorine

The degradation of 2-(2,4-dichlorophenoxy)-5-chlorophenol (triclosan) in chlorinated water samples was investigated. Sensitive determination of the parent compound and its transformation products was achieved by gas chromatography with mass spectrometry detection after sample concentration, using a solid-phase extraction sorbent and silylation of the target compounds. Experiments were accomplished using ultrapure water spiked with chlorine and triclosan concentrations in the low mg/l and ng/ml ranges respectively. Chlorination of the phenolic ring and cleavage of the ether bond were identified as the main triclosan degradation pathways. Both processes led to the production of two tetra- and a penta-chlorinated hydroxylated diphenyl ether, as well as 2,4-dichlorophenol. The formation of 2,3,4-trichlorophenol was not detected in any experiment; however, significant amounts of 2,4,6-trichlorophenol were noticed. All of these five compounds were also identified when triclosan was added to tap-water samples with free chlorine concentrations below 1 mg/l. Minor amounts of three di-hydroxylated phenols, containing from one to three atoms of chlorine in their structures, were also identified as unstable triclosan chlorination by-products. The analysis of several raw wastewater samples showed the co-existence of important concentrations of triclosan and its most stable by-products (2,4-dichlorophenol and 2,4,6-trichlorophenol), reinforcing the potential occurrence of the described transformations when products containing triclosan are mixed with chlorinated tap water.     

2-Mercaptomethyl-thiazolidines use conserved aromatic–S interactions to achieve broad-range inhibition of metallo-β-lactamases

Infections caused by multidrug resistant (MDR) bacteria are a major public health threat. Carbapenems are among the most potent antimicrobial agents that are commercially available to treat MDR bacteria. Bacterial production of carbapenem-hydrolysing metallo-β-lactamases (MBLs) challenges their safety and efficacy, with subclass B1 MBLs hydrolysing almost all β-lactam antibiotics. MBL inhibitors would fulfil an urgent clinical need by prolonging the lifetime of these life-saving drugs. Here we report the synthesis and activity of a series of 2-mercaptomethyl-thiazolidines (MMTZs), designed to replicate MBL interactions with reaction intermediates or hydrolysis products. MMTZs are potent competitive inhibitors of B1 MBLs in vitro (e.g., K_i = 0.44 μM vs. NDM-1). Crystal structures of MMTZ complexes reveal similar binding patterns to the most clinically important B1 MBLs (NDM-1, VIM-2 and IMP-1), contrasting with previously studied thiol-based MBL inhibitors, such as bisthiazolidines (BTZs) or captopril stereoisomers, which exhibit lower, more variable potencies and multiple binding modes. MMTZ binding involves thiol coordination to the Zn(ii) site and extensive hydrophobic interactions, burying the inhibitor more deeply within the active site than d/l-captopril. Unexpectedly, MMTZ binding features a thioether–π interaction with a conserved active-site aromatic residue, consistent with their equipotent inhibition and similar binding to multiple MBLs. MMTZs penetrate multiple Enterobacterales, inhibit NDM-1 in situ, and restore carbapenem potency against clinical isolates expressing B1 MBLs. Based on their inhibitory profile and lack of eukaryotic cell toxicity, MMTZs represent a promising scaffold for MBL inhibitor development. These results also suggest sulphur–π interactions can be exploited for general ligand design in medicinal chemistry.

Metallo-β-lactamases (MBLs) are major culprits of resistance to carbapenems in bacteria. A series of thiazolidines are potent MBL inhibitors, restoring the activity of carbapenems. Metal binding and sulphur–π interactions are key to inhibition.     

Extraction of cesium into nitrobenzene using hydrogen dicarbollylcobaitate in the presence of dibenzo-24-crown-8

Extraction of microamounts of cesium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B⁻) in the presence of dibenzo-24-crown-8 (DB24C8,L) has been investigated. The equilibrium data have been explained assuming that the complexes HL⁺ and CsL⁺ are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined.     

Chiral analysis of pollutants and their metabolites by capillary electromigration methods

Chiral separation of enantiomers is one of the most challenging tasks for any analytical technique including CE. Since the first report in 1985 showing the great possibilities of CE for the separation of chiral compounds, the amount of publications concerning this topic has quickly increased. Although chiral electromigration methods have mainly been used for enantioseparation of drugs and pharmaceuticals, they have also been applied to analyze chiral pollutants. This article intends to provide an updated overview, including works published till January 2005, on the principal applications of CE to the chiral analysis of pollutants and their metabolites, with special emphasis on articles published in the last 10 years. The main advantages and drawbacks regarding the use of CE for chiral separation of pollutants are addressed including some discussion on the foreseen trends of electromigration procedures applied to chiral analysis of contaminants.     

Capillary electrophoretic determination of triamterene, methotrexate, and creatinine in human urine

A capillary zone electrophoresis (CZE) method using a fused-silica capillary (60.2 cm x 75 microm ID) was investigated for the determination of triamterene (TRI), methotrexate (MTX), and creatinine (CREA) in human urine. The separation was performed using a hydrodynamic injection time of 7 s (0.5 psi), a voltage of 25 kV, a capillary temperature of 30 degrees C, and 40 mM phosphoric acid adjusted to pH 2.25 by addition of triethanolamine as separation electrolyte. Under these conditions, analysis takes about 15 min. A linear response over the 0.5-15.0 mg L(-1) concentration range was found for TRI and MTX, and 0.5-80.0 mg L(-1) for CREA. Dilution of the sample (water:urine, 1:1 for TRI and MTX, and 1:25 for CREA determination) was the only step necessary prior to analysis by electrophoresis. The developed method is easy, rapid, and sensitive and has been applied to determine triamterene,methotrexate, and creatinine in urine samples with satisfactory results.     

Prediction of peak shape as a function of retention in reversed-phase liquid chromatography

Optimisation of the resolution of multicomponent samples in HPLC is usually carried out by changing the elution conditions and considering the variation in retention of the analytes, to which a standard peak shape is assigned. However, the change in peak shape with the composition of the mobile phase can ruin the optimisation process, yielding unexpected overlaps in the experimental chromatograms for the predicted optimum, especially for complex mixtures. The possibility of modelling peak shape, in addition to peak position, is therefore attractive. A simple modified-Gaussian model with a parabolic variance, which is a function of conventional experimental parameters: retention time (tR), peak height (H0), standard deviation at the peak maximum (sigma0), and left (A) and right (B) halfwidths, is proposed. The model is a simplification of a previous equation proposed in our laboratory. Linear and parabolic relationships were found between the peak shape parameters (sigma0), A and B) and tR, with a mean relative error of 1-5% in most cases. This error was partially due to variations in peak position and shape among injections, which in some cases were above 2%. Correlations between (sigma0, A and B) and the retention time, which is easily modelled as a function of mobile phase composition, allowed a simple and reliable prediction of chromatographic peaks. A parameter that depends on the slopes of the linear relationships for A and B versus tR is also proposed to evaluate column efficiency. The modified-Gaussian model was used to describe the peaks of six diuretics of diverse acid-base behaviour and polarity, which were eluted with 15 mobile phases where the composition was varied between 30 and 50% (v/v) acetonitrile and the pH between 3 and 7.