Poly(butylene terephthalate)/poly(ε-caprolactone) blends: Influence of PCL molecular mass on PBT melting and crystallization behavior

The isothermal crystallization kinetics and melting behavior of poly(butylene terephthalate) (PBT) in binary blends with poly(ε-caprolactone) (PCL) was investigated as a function of PCL molecular mass by differential scanning calorimetry and optical microscopy. The components are miscible in the melt when oligomeric PCL (M_w = 1250) is blended with PBT, whereas only partial miscibility was found in mixtures with higher molecular mass (M_w = 10,000 and 50,000). The equilibrium melting point of PBT in the homopolymer and in blends with PCL was determined through a non-linear extrapolation of the T_m = f(T_c) curve. The PBT spherulitic growth rate and bulk crystallization rate were found to increase with respect to plain PBT in blends with PCL1250 and PCL10000, whereas addition of PCL50000 causes a reduction of PBT solidification rate. The crystallization induction times were determined by differential scanning calorimetry for all the mixtures through a blank subtraction procedure that allows precise estimation of the crystallization kinetics of fast crystallizing polymers. The results have been discussed on the basis of the Hoffman-Lauritzen crystallization theory and considerations on both the transport of chains towards the crystalline growth front and the energy barrier for the formation of critical nuclei in miscible and partially miscible PBT/PCL mixtures are widely debated.     

Rapid screening of selective serotonin re-uptake inhibitors in urine samples using solid-phase microextraction gas chromatography–mass spectrometry

In this paper a solid-phase microextraction–gas chromatography–mass spectrometry (SPME–GC–MS) method is proposed for a rapid analysis of some frequently prescribed selective serotonin re-uptake inhibitors (SSRI)—venlafaxine, fluvoxamine, mirtazapine, fluoxetine, citalopram, and sertraline—in urine samples. The SPME-based method enables simultaneous determination of the target SSRI after simple in-situ derivatization of some of the target compounds. Calibration curves in water and in urine were validated and statistically compared. This revealed the absence of matrix effect and, in consequence, the possibility of quantifying SSRI in urine samples by external water calibration. Intra-day and inter-day precision was satisfactory for all the target compounds (relative standard deviation, RSD, <14%) and the detection limits achieved were <0.4 ng mL^–1 urine. The time required for the SPME step and for GC analysis (30 min each) enables high throughput. The method was applied to real urine samples from different patients being treated with some of these pharmaceuticals. Some SSRI metabolites were also detected and tentatively identified.     

Laser photoinitiated nitrosylation of 3-electron reduced Nm europaea hydroxylamine oxidoreductase: kinetic and thermodynamic properties of the nitrosylated enzyme

Hydroxylamine-cytochrome c554 oxidoreductase (HAO) catalyzes the 4-e(-) oxidation of NH(2)OH to NO(2)(-) by cytochrome c554. The electrons are transferred from NH(2)OH to a 5-coordinate heme known as P(460), the active site of HAO. From P(460), c-type hemes transport the electrons through the enzyme to a remote solvent-exposed c-heme, where cyt c554 reduction occurs. When 3-60 microM NO* are photogenerated by laser flash photolysis of N,N'-bis-(carboxymethyl)-N,N'-dinitroso-1,4-phenylenediamine, in a solution containing approximately 1 microM HAO prereduced by 3 e(-)/subunit, the HAO c-heme pool is subsequently oxidized by up to 1 e(-)/HAO subunit. The reaction rate for HAO oxidation shows first-order dependence on [HAO], and zero-order dependence on [NO*] (k(obs) = 1250 +/- 150 s(-)(1)). However, the total HAO oxidized shows hyperbolic dependence on [NO*]. We suggest that NO* first binds reversibly to P(460) giving a {Fe(NO)}(6) moiety. Intramolecular electron transfer (IET) from the c-heme pool then reduces P(460) to {Fe(NO)}.(7) The overall binding constant (K) for formation of {Fe(NO)}(7) from free NO* and 3-e(-) reduced HAO was measured at (7.7 +/- 0.6) x10(4) M(-1). This value is larger than that for typical ferriheme proteins ( approximately 10(4) M(-1)), but much smaller than that for the corresponding ferroheme proteins ( approximately 10(11) M(-1)). The final product generated by nitrosylating 3-e(-) reduced HAO is believed to be the same species obtained by adding NH(2)OH to the fully oxidized enzyme. The experiments described herein suggest that when NH(2)OH and HAO first react, only two of the NH(2)OH electrons end up in the c-heme pool. The other two remain at P(460) as part of an {Fe(NO)}(7) moiety. These results are discussed in relation to earlier studies that investigated the effect of putting fully oxidized and fully reduced HAO under 1 atm of NO*.     

Langmuir monolayers of the zwitterionic surfactant hexadecyl 1-N-L-tryptophan glycerol ether

We report the formation of Langmuir monolayers of pure zwitterionic hexadecyl 1-N-L-tryptophan glycerol ether (C(16)-TGE) surfactant and mixed monolayers of cationic-zwitterionic surfactant obtained modifying the pH of the subphase. The pressure-area and surface potential-area isotherms and fluorescence microscopy measurements have been used to characterize the surface phase transitions in the monolayers. These transitions appeared at larger areas as the pH decreased from 6.0 to 2.0 and almost disappeared as the pH decreased further. The analysis of the surface potential and the infrared reflection-absorption spectroscopy data suggests that the phase transition is associated with a change of orientation of both the hydrocarbon chain and the aromatic group of the surfactant with respect to the air-water surface. The surface rheology of the monolayers was studied by quasielastic light scattering and by the oscillatory barrier technique. The results indicate that there is at least one relaxation process in the monolayer.     

Reactions of lignin in chlorine dioxide bleaching of kraft pulps

The reactions between chlorine dioxide and the residual lignin in oxygen-bleached softwood kraft pulps have been studied. In a first series, isolated lignin samples have been subjected to chlorine dioxide oxidation at different pH values and subsequently analysed by oxidative degradation and elemental analysis. Different analytical techniques have also been employed to follow the gradual chemical changes in lignins isolated from kraft pulps after each of the bleaching stages in the OD(EOP)DD sequence. The results demonstrate that, in order to minimize chlorination of the lignin, the first chlorine dioxide stage should be carried out at a pH around or above three. At this pH level, a high degree of lignin oxidation is also achieved. A certain (mono)-chlorination of the lignin in the first D stage cannot be avoided, but this chlorine is to a large extent removed in the later bleaching stages. The efficient and non-selective oxidation of the various phenolic lignin end groups by chlorine dioxide is clearly illustrated by the analytical data. Moreover,¹³C NMR reveals that reduced lignin structures formed during the kraft cook survive the oxidative bleaching stages to a large extent.     

Determination of manganese and zinc in powdered chocolate samples by slurry sampling using sequential multi-element flame atomic absorption spectrometry

In the present work, a slurry sampling flame atomic absorption spectrometric method to determine directly manganese and zinc in powdered chocolate samples is proposed. The optimization step was performed using univariate methodology involving the following factors: nature and concentration of the acid solution, sonication time, and particle size. The established conditions led to the use of a sample mass of 150 mg, 2.0 mol L^− 1 nitric acid solution, sonication time of 15 min, and a slurry volume of 50 mL. This method allows the determination of manganese and zinc with detection limit of 52 and 61 ng g^− 1, respectively, and a precision expressed as relative standard deviation (RSD) of 2.6% and 3.2% (both, n = 10) for contents of manganese and zinc of 52.4 and 100.0 μg g^− 1, respectively. The proposed method was applied for determination of manganese and zinc in five powdered chocolate samples. In these, the manganese content varied from 42.8 to 52.7 and from 88.6 to 102.4 μg g^− 1 of zinc. The analytical results were compared with the results obtained by analysis of these samples after digestion using open vessel and acid bomb digestion procedures and determination using FS-FAAS. The statistical comparison by t-test (95% confidence level) showed no significant difference between these results.     

Multilayer sol-gel membranes for optical sensing applications: single layer pH and dual layer CO(2) and NH(3) sensors

Organo-silica sol-gel membranes have been prepared and demonstrated in a single layer format for pH measurement and multiple-layer format for both carbon dioxide and ammonia. The sensors are simple and versatile since the same chemistry and membranes are used for each sensor. The sensors use hydroxypyrenetrisulfonic acid (HPTS) as the indicator immobilized in a base-catalyzed sol-gel containing poly(dimethyl)siloxane, aminopropyltriethoxysilane (APTES) and tetraethylorthosilicate (TEOS). This indicator gel is over coated with a hydrophobic sol-gel to reduce cross reactivity to pH when either CO(2) or NH(3) are examined. The gels are very stable and the sensors retain response up to a 12-month period. Sensors can be stored in buffer or dry without loss of function and have response times to that are comparable to literature values.     

Matrix isolation infrared studies of complexes formed between substituted phenols and trimethylamine

Infrared spectroscopy and matrix isolation technique have been used to study the 1 : 1 complexes formed between 2,4,5-trichlorophenol (TCP), pentachlorophenol (PCP) or 2-chloro-4,6-dinitrophenol (CNP) and trimethylamine (TMA) isolated in solid argon. The results were analyzed in relation to the type of complex formed. Depending on the proton-donor ability of the phenol three different types of hydrogen bonded complexes have been identified in argon matrices. The weakest phenol in the series, TCP (pK_a = 6.72), forms a strong molecular hydrogen bonded complex with TMA as indicated by the broad ν(OHN) absorption with a maximum at 2490 cm⁻¹ and a band at 811 cm⁻¹ due to the ν_s(C₃N) mode of the perturbed amine. The strongest phenol, CNP (pK_a = 2.01), interacts with TMA in an argon matrix to form ionic complex with the proton transferred to the base molecule. This is evidenced by the presence of the ν(NH⁺---O⁻) absorption between 3000−1800 cm⁻¹, by the ν_as(C₃N⁺) and ν_s(C₃N⁺) absorptions due to the protonated amine and by numerous product bands due to the relatively strongly perturbed modes of the phenol ring. The interaction between TMA and a phenol of intermediate strength, PCP (pK_a = 4.74), in solid argon probably leads to the formation of two types of hydrogen bonded complexes: an ionic complex with the proton transferred to the amine molecule and a pseudosymmetric one with the proton more or less equally shared between the phenol and amine molecules. In this case the protonic absorption consists of two broad features situated in the 3000–1600 cm⁻¹ and 950–400 cm⁻¹ regions due to the ν(NH⁺O⁻) and ν(OHN) modes, respectively.     

Escherichia coli single-stranded DNA-binding protein,a molecular tool for improved sequence quality in pyrosequencing

Pyrosequencing is a four-enzyme bioluminometric DNA sequencing technique based on a DNA sequencing by synthesis principle. Currently, the technique is limited to analysis of short DNA sequences exemplified by single-nucleotide polymorphism analysis. In order to expand the field for pyrosequencing, the read length needs to be improved and efforts have been made to purify reaction components as well as add single-stranded DNA-binding protein (SSB) to the pyrosequencing reaction. In this study, we have performed a systematic effort to analyze the effects of SSB by comparing the pyrosequencing result of 103 independent complementary DNA (cDNA) clones. More detailed information about the cause of low quality sequences on templates with different characteristics was achieved by thorough analysis of the pyrograms. Also, real-time biosensor analysis was performed on individual cDNA clones for investigation of primer annealing and SSB binding on these templates. Results from these studies indicate that templates with high performance in pyrosequencing without SSB possess efficient primer annealing and low SSB affinity. Alternative strategies to improve the performance in pyrosequencing by increasing the primer-annealing efficiency have also been evaluated.     

Novel platinum-catalysed cascade reactions: cyclisation, ring expansion and 1,2-oxygen shift reaction of a camphor-derived diyne

2,3-Bis(ethynyl)-3-hydroxy-camphorsultam was converted in one step into a novel tetracyclic cyclopentenone derivative, in an unprecedented platinum-catalysed cascade reaction. In the course of this reaction, cyclisation of the alkynes takes place, together with a ring expansion of the camphor skeleton and 1,2-migration of an oxygen atom. The structure of the unexpected product was analysed in detail by one- and two-dimensional NMR spectroscopy, and validated with the help of quantum mechanical calculations (B3LYP/6-31G^∗∗ and B3LYP/6-31+G(2df)) of the IR vibrational frequencies and the ¹H and ¹³C isotropic chemical shifts.