Ab initio study of the cyclooctatetraenyl radical

Ab initio calculations have been carried out on the 1,3,5,7- and 1,2,4,7-tetraene configurations of the cyclooctatetraenyl radical at UHF, ROHF, MCSCF, ROCISD, QCISD, and CCSD(T) levels of theory with 6-311G(d,p) and cc-pVDZ basis sets. Although spin contamination is present, the ROCISD calculations support the energies obtained from less intensive, UHF-based coupled cluster calculations over the energies obtained from MCSCF analysis of the pi-electron orbitals. The 1,3,5,7-form is a local minimum at the coupled cluster levels, higher in energy than the resonance-stabilized 1,2,4,7-form by 10-13 kJ/mol, but bounded by a barrier of less than 0.5 kJ/mol. The isomerization surface connecting these two structures is described and results reported from integration of the vibrational Schr?dinger equation on that surface. Excited vibrational states at energies just above the isomerization barrier are dominated by the character of the 1,3,5,7-tetraenyl radical, which suggests that chemistry involving this intermediate at typical combustion temperatures may branch at this juncture.     

pH controls the rate and mechanism of nitrosylation of water-soluble FeIII porphyrin complexes

In-depth kinetic and mechanistic studies on the reversible binding of NO to water-soluble iron(III) porphyrins as a function of pH revealed unexpected reaction kinetics for monohydroxo-ligated (P)Fe(III)(OH) species formed by deprotonation of coordinated water in diaqua-ligated (P)Fe(III)(H(2)O)(2). The observed significant decrease in the rate of NO binding to (P)Fe(OH) as compared to that of (P)Fe(H(2)O)(2) does not conform with expectations based on previous mechanistic work on NO-heme interactions, which would point to a diffusion-limited reaction for the five-coordinate Fe(III) center in (P)Fe(OH). The decrease in rate and an associatively activated mode of NO binding observed at high pH is ascribed to an increase in the activation barrier related to spin state and structural changes accompanying NO coordination to the high-spin (P)Fe(III)(OH) complex. The existence of such a barrier has previously been observed in the reactions of five-coordinate iron(II) hemes with CO and is evidenced for the first time for the process involving coordination of NO to the iron heme complex. The observed reactivity pattern, relevant in the context of studies on NO interactions with synthetic and biologically important hemes (in particular, hemoproteins), is reported here for an example of a simple water-soluble iron(III) porphyrin [meso-tetrakis(sulfonatomesityl)porphinato]-iron(III), (TMPS)Fe(III).     

Gas–liquid partition coefficients and Henry's law constants of methyl mercaptan in aqueous solutions of Fe(II)–CDTA chelate complex

Utilization of ferric chelate complex of trans-1,2-cyclohexanediaminetetraacetic acid (CDTA) for the oxidative scrubbing of H₂S and CH₃SH in Kraft mill streams can be beneficial from the standpoints of iron protection against precipitation and oxygen-mediated regenerative oxidation of the ferrous chelate CDTA. The physical solubility of methyl mercaptan in CDTA–Fe(III) complex cannot be measured directly because of oxidation of the sulfur-bearing gaseous species with the ferric chelate. Therefore, this investigation was carried out to determine the gas–liquid partition coefficients and Henry's law constants of methyl mercaptan in aqueous iron-free CDTA solutions and non-reacting ferrous chelate solutions (CDTA–Fe(II) complex), using the static headspace method with an estimated accuracy of about 2%. Experiments with aqueous solutions of chelate concentrations varying between 38 and 300 mol m⁻³ were carried out at temperatures between 298 and 333 K and atmospheric pressure. It was shown that the methyl mercaptan solubility decreases with increasing temperature for all systems but was not much influenced, in the studied conditions, by the chelate concentration especially at larger temperatures.     

Improved quantification limits in chiral capillary electrochromatography by peak compression effects

The peak compression effect has been applied to improve quantification limits in chiral capillary electrochromatography (CEC). A stationary phase based on the chiral selector vancomycin (Chirobiotic V) was used for separations of the enantiomers of mianserin. By adding solvents with a low dielectric constant, e.g. 2-propanol or tetrahydrofuran, to the sample solution, peak compression could be induced. The plate numbers for the minor enantiomer increased from approximately 100,000 to 1.4-1.6 million plates/m, when the composition of the mobile phase was adjusted so that the analyte eluted within either one of two system zones originating from the sample solution. A 10-fold improvement in the quantification limit for the minor enantiomer was obtained compared to elution under non-focused conditions.     

ITQ-15: the first ultralarge pore zeolite with a bi-directional pore system formed by intersecting 14- and 12-ring channels, and its catalytic implications

The pore topology of ITQ-15 zeolite consists of an ultra-large 14-ring channel that is intersected perpendicularly by a 12-ring pore; acid sites have been introduced in its framework and this unique structure shows advantages over unidirectional ultralarge pore zeolites for diffusing and reacting large molecules.     

Enthalpies of formation of methoxybenzoic acids and their dependence on structure

The energy of combustion of 2,5-dimethoxybenzoic acid has been determined using a static bomb calorimeter. The vapor pressures of the compound have been measured over a 18 K temperature interval by the Knudsen effusion technique. Heat capacity measurements betweenT=270 K andT=338 K were carried out by DSC. From these experimental results the standard molar enthalpies of combustion, sublimation, and formation in the crystalline and gaseous state at the temperature 298.15 K have been derived. With this compound, the series of mono- and dimethoxy-benzoic acids have been completed. Their_f H _m ^o values were expressed by an additive relationship, taking into account the number of methoxy groups and the number of all 1,2 interactions: an accuracy of 3.3 kJ·mol^–1 was achieved. In an alternative approach the substituent effect of the methoxy groups was evaluated within the framework of isodesmic reactions. The effect of disubstitution was referred to mono derivatives and the excess energy—the so-called buttressing effect—was evaluated (2–24 kJ· mol^–1 for individual bis derivatives). These values were explained in terms of the conformation of the methoxy group around the C_ar-O bond.     

Intermolecular stacking of a tetranuclear cyclic Pt(II) complex: NMR characterization and X-ray crystal structure of cis-trans-cis-trans tetra[μ-2,6-diethynyl-4-nitroaniline-bis(tri(p-tolyl)phosphine)platinum(II)]

The synthesis and characterization of a tetranuclear Pt complex, cis-trans-cis-trans tetra[μ-2,6-diethynyl-4-nitroaniline-bis(tri(p-tolyl)phosphine) platinum(II)], namely [L₂Pt-DENA]₄ with L = tri-p-tolylphosphine, is reported. The complex was obtained by the dehydrohalogenative condensation of 2,6-diethynyl-4-nitroaniline (DENA) with cis-[dichlorobis(tri(p-tolyl)phosphine)platinum(II)]. The single crystal structure determination of [L₂Pt-DENA]₄ indicated the formation of a neutral molecular cycle with four alternating platinum units in cis and trans configurations, all bridged with DENA spacers with the presence of solvent (toluene) crystallization molecules. A twisted tetranuclear cyclic feature was identified. The formation of intermolecular stacks of the tetranuclear complex in solution was assessed by means of nuclear Overhauser enhancement spectroscopy (NOESY) and rotating frame Overhauser effect spectroscopy (ROESY) characterizations.     

Influence of conjugated nitrogenous bases on the spectra and structure of mixed-ligand nickel(II) chelates containing β-diones

The infrared and electronic excitation spectra of a series of new nickel(II) chelates containing an-diimine (or nitrogenous base, enR) and the anion of a-dione (1,3-ketoenol or 1,3-ketoester,H) were obtained in the solid state and in solution. The composition and the overall structure of the new chelates in the solid state depends on ligand concentration, the substituents within the-dionato moiety and the counterion present. The IR and electronic excitation spectra of [Ni(enR)₂ ]NO₃ and [Ni(enR)(O₂NO)] indicate, in conjunction with other physicochemical measurements, bidentate coordination of the ligands, while the spectral shifts reveal replacement of the (O,O)nitrato group by basic solvents. The existence of the nickel(II) in an octahedral environment is confirmed by an X-ray structure analysis of [Ni(dpamH)₂acac]NO₃ · CH₃OH (monoclinic, space groupP2_l/n, a=17.296(1),b=7.462(1),c=21.604(3) å,=95.65(1),Z=4, R=0.0534,Rw=0.0600), where dpamH denotes the 2,2-dipyridylamine.     

Synthesis and characterization of 1H-benz[f]indole-4,9-dione and the related dihydroxy derivative

Dehydrogenation and contemporaneous demethylation of the parent 4,9-dimethoxy-5,6,7,8-tetrahydro-1H-benz[f]indole ( 2 ) yielded the expected aromatization products 4 and 5 (1H-benz[f]indole-4,9-dione and 4,9-di-hydroxy-1H-benz[f]indole, respectively).     

Towards the development of multisensor for drugs of abuse based on molecular imprinted polymers

The synthetic receptors for cocaine, deoxyephedrine, methadone and morphine were computationally designed and produced using molecular imprinting. The structure and energy of the molecular complexes were analysed by computational techniques. The possible structures of the binding sites in the synthetic receptors have been compared with those of corresponding natural receptors. The composition of imprinted polymers was optimised to allow adequate performance under the same experimental conditions. All selected molecular imprinting polymers (MIPs) demonstrated stronger affinity in comparison with corresponding blank polymers resulting in imprinted factors (I) equal to 1.2 (cocaine), 2.5 (deoxyephedrine), 3.5 (methadone) and 3 (morphine) which suggested that the specific binding site for each molecule was successfully created. The polymers studied possessed good selectivity and affinity towards their templates and could be recommended for the integration with sensor devices. From a practical point of view, especially for multisensor requirements, the synthetic receptors based on imprinted polymers could be superior to natural receptors due to their stability, robustness and compatibility with automation processes required for sensor fabrication.