Sol-gel synthesis of ZnO/Zn<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript>TiO<Subscript>4</Subscript> powders: structural properties,electrical conductivity and dielectric behavior

The aim of this work was an investigation of structural and electrical properties of ZnO/Zn_2-xFe_xTiO₄ (x?=?0.7, 1, 1.4) powders. The compounds obtained by sol-gel method are characterized by several techniques: X-ray diffraction (XRD), N₂ adsorption–desorption isotherms, scanning and transmission electron microscopy (SEM and TEM), X-ray photoelectron spectroscopy (XPS), electrical and dielectrical measurements. The XRD, SEM and XPS analysis confirmed the formation of ZnFeTiO₄ inverse spinel structure. The electrical and dielectrical properties of ZnO/Zn_2-xFe_xTiO₄ (x?=?0.7, 1, 1.4) were measured by impedance spectroscopy, revealing a decrease in the electrical conductivity and the dielectric constant with Fe content.

Open image in new window

     

Three-dimensional NMR Spectroscopy of organic molecules by random sampling of evolution time space and multidimensional Fourier transformation

In this communication we present the application of a new method, which enables one to acquire 3D NMR spectra in a reasonable time and preserves high resolution in indirectly detected domains. The new method is based on random distribution of time domain data points followed by Quaternion FT with respect to two time variables in one step.The experimental examples include three-dimensional spectra of strychnine in CDCl3, TOCSY-HSQC, COSY-HMBC, and the new technique proposed here: heteronuclear single quantum multiple bond correlation (HSQMBC). The obtained spectra are compared to those recorded at the same time employing the conventional acquisition scheme. We show that high-quality 3D spectra of organic compounds can be obtained in reasonable experimental time and that they are of great interest in cases when direct analysis of 2D spectra is difficult.     

Multilocus mutation scanning for the analysis of genetic variation within Malassezia (Basidiomycota: Malasseziales)

Members of the genus Malassezia are budding yeasts, characterized by a thick cell wall. Recently, these yeasts have received attention as emerging pathogens. They are common commensals on the skin of animals and can become pathogenic under the influence of various predisposing factors. Central to studying their taxonomy, systematics, and ecology and to diagnosis is the accurate identification of species or operational taxonomic units. To overcome the limitations of current phenotypic and biochemical methods of identification, a PCR-coupled SSCP approach, utilizing sequence variation (0.4-33.5%) in short regions (approximately 250-270 bp) of the first internal transcribed spacer (ITS-1) of nuclear ribosomal DNA and the chitin synthase-2 gene (chs-2), was assessed for the identification and differentiation of different species/genotypes of Malassezia, characterized previously by DNA sequencing. Genomic DNA samples (n = 30) from Malassezia isolates cultured from canine skin scrapings were assessed by SSCP analysis of the two different genetic loci, and unequivocal delineation between genotypes and species was achieved. This SSCP approach is considered to provide a practical tool for the rapid and reliable genetic characterization of Malassezia genotypes/species from dogs and for investigating their population genetics and ecology. It will also provide a powerful tool for studies of Malassezia isolates from other animal species.     

Fabrication of phytic acid sensor based on mixed phytase-lipid Langmuir-Blodgett films

This paper reports the surface activity of phytase at the air-water interface, its interaction with lipid monolayers, and the construction of a new phytic acid biosensor on the basis of the Langmuir-Blodgett (LB) technique. Phytase was inserted in the subphase solution of dipalmitoylphosphatidylglycerol (DPPG) Langmuir monolayers, and its incorporation to the air-water interface was monitored with surface pressure measurements. Phytase was able to incorporate into DPPG monolayers even at high surface pressures, ca. 30 mN/m, under controlled ionic strength, pH, and temperature. Mixed Langmuir monolayers of phytase and DPPG were characterized by surface pressure-area and surface potential-area isotherms, and the presence of the enzyme provided an expansion in the monolayers (when compared to the pure lipid at the interface). The enzyme incorporation also led to significant changes in the equilibrium surface compressibility (in-plane elasticity), especially in liquid-expanded and liquid-condensed regions. The dynamic surface elasticity for phytase-containing interfaces was investigated using harmonic oscillation and axisymmetric drop shape analysis. The insertion of the enzyme at DPPG monolayers caused an increase in the dynamic surface elasticity at 30 mN m(-)(1), indicating a strong interaction between the enzyme and lipid molecules at a high-surface packing. Langmuir-Blodgett (LB) films containing 35 layers of mixed phytase-DPPG were characterized by ultraviolet-visible and fluorescence spectroscopy and crystal quartz microbalance nanogravimetry. The ability in detecting phytic acid was studied with voltammetric measurements.     

Multitarget Drug Discovery for Alzheimer's Disease: Triazinones as BACE‐1 and GSK‐3β Inhibitors

Cumulative evidence strongly supports that the amyloid and tau hypotheses are not mutually exclusive, but concomitantly contribute to neurodegeneration in Alzheimer′s disease (AD). Thus, the development of multitarget drugs which are involved in both pathways might represent a promising therapeutic strategy. Accordingly, reported here in is the discovery of 6‐amino‐4‐phenyl‐3,4‐dihydro‐1,3,5‐triazin‐2(1H)‐ones as the first class of molecules able to simultaneously modulate BACE‐1 and GSK‐3β. Notably, one triazinone showed well‐balanced in vitro potencies against the two enzymes (IC₅₀ of (18.03±0.01) μM and (14.67±0.78) μM for BACE‐1 and GSK‐3β, respectively). In cell‐based assays, it displayed effective neuroprotective and neurogenic activities and no neurotoxicity. It also showed good brain permeability in a preliminary pharmacokinetic assessment in mice. Overall, triazinones might represent a promising starting point towards high quality lead compounds with an AD‐modifying potential.     

Influence of the soft segment length on the properties of water‐cured poly(carbonate‐urethane‐urea)s

Poly(carbonate‐urethane‐urea)s (PCUU) based on oligocarbonate diols (M_n ≈ 2000) with different length of the hydrocarbon chain as soft segments were synthesized and investigated. Carbonate oligomerols were obtained in a two‐step method from dimethyl carbonate (DMC) and linear α,ω‐diols (1,4‐butanediol, 1,5‐pentanediol, 1,6‐hexanediol, 1,9‐nonanediol, 1,10‐dekanediol and 1,12‐dodecanediol). Oligo(trimethylene carbonate) diol was synthesized using ring‐opening polymerization of trimethylence carbonate. PCUUs were obtained by prepolymer method using isophorone diisocyanate (IPDI) and water as a chain extender. Changes in polymers properties with increase of methylene group number between carbonate linkages were investigated by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), tensile strength and hardness measurements. The thermal stability was also analyzed by means of thermogravimetric analysis (TGA). Based on FTIR analysis influence of methylene groups number between carbonate linkages on phase separation and concentration of allophanate and biuret groups in the samples were investigated. The obtained poly(carbonate‐urethane‐urea)s exhibited very good mechanical properties. Tensile strength and elongation at break were 40 MPa and 400–600%, respectively, depending on the oligocarbonate used. Copyright © 2014 John Wiley & Sons, Ltd.     

N-Haloamidines-V: Reaction of N-chloro-N'-aroyl-acetamidines and -benzamidines with enamines

The reaction between N-chloro-N'-aroyl-amidines and β,β-disubstituted enamines affords 1 - aroyl - 4 -amino - 4,5 - dihydro - imidazoles in low yields, the main reaction product being N - (2 - morpholino - 2,2 -disubstituted) - ethylidene - N' - aroyl - amidines. A similar reaction course was not observed with enamines bearing a hydrogen atom in the β-position. In this case only products derived from electrophilic chlorination on enamines were isolated.     

Molecular distillation

Molecular distillation was studied for the separation of tocopherols from soya sludge, both experimentally and by simulation, under different operating conditions, with good agreement. Evaporator temperatures varied from 100°C to 160°C and feed flow rates ranged from 0.1 to 0.8 kg/h. The process pressure was maintained at 10⁻⁶ bar, the feed temperature at 50°C, the condenser temperature at 60°C, and the stirring at 350 rpm. For each process condition, samples of both streams (distillate and residue) were collected and stored at −18°C before tocopherols analyses. Owing to the differences between molecular weights and vapor pressures of free fatty acids and tocopherols, tocopherols preferentially remained in the residue at evaporator temperatures of 100°C and 120°C, whereas for higher temperatures (140°C and 160°C) and lower feed flow rate, tocopherols tended to migrate to the distillate stream.     

Polymerizations of olefins and diolefins catalyzed by monocyclopentadienyltitanium complexes containing a (dimethylamino)ethyl substituent and comparison with ansa-zirconocene systems

{[2-(dimethylamino)ethyl]cyclopentadienyl}titanium trichloride (Cp^NTiCl₃, 1 ) was activated with methylaluminoxane (MAO) to catalyze polymerizations of ethylene (E), propylene (P), ethylidene norbornene (ENB), vinylcyclohexene (VCH), and 1,4-hexadiene (HD). The dependence of homopolymerization activity ( A ) of 1 /MAO on olefin concentration ([M]ⁿ) is n = 2.0 ± 0.5 for E and n = 1.8 ± 0.2 for P. The value of n is 2.4 ± 0.2 for CpTiCl₃/MAO catalysis of ethylene polymerization; this system does not polymerize propylene. 1 /MAO catalyzes HD polymerization at one-tenth of A _H for 1-hexene, probably because of chelation effects in the HD case. The copolymerization of E and P has reactivity ratios of r_E = 6.4 and r_P = 0.29 at 20°C, and r_Er_P = 1.9, which suggests 1 /MAO may be a multisite catalyst. The copolymerization activity of CpTiCl₃/MAO is 50 times smaller than that of Cp^NTiCl₃/MAO. Terpolymerization of E/P/ENB has A of 10⁵ g of polymer/(mol of Ti h), incorporates up to 14 mol % (∼ 40 wt %) of ENB, and high MW's of 1 to 3 × 10⁵. All of these parameters are surprisingly insensitive to the ENB concentration. The E/P/VCH terpolymerization has comparable A value of (1.3 ± 0.3) × 10⁵ g/(mol of Ti h). The incorporation of VCH in terpolymer increases with increasing [VCH]. Terpolymerization with HD occurs at about one-third of the A of either ENB or VCH; the product HD–EPDM is low in molecular weight and contains less than 4% of HD. These terpolymerization results are compared with those obtained previously for three zirconocene precursors: rac-ethylenebis(1-η⁵-indenyl)dichlorozirconium ( 6 ), rac-(dimethylsilylene)bis(1-η⁵-indenyl)dichlorozirconium ( 7 ), and ethylenebis(9-η⁵-fluorenyl)dichlorozirconium ( 8 ). The last compound is a particularly poor terpolymerization catalyst; it incorporates very little VCH or HD and no ENB at all. 7 /MAO is a better catalyst for E/P/VCH terpolymerization, while 6 /MAO is superior in E/P/HD terpolymerization. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 319–328, 1998     

Formation of polymeric toroidal-spiral particles

Compared to spherical matrices, particles with well-defined internal structure provide large surface to volume ratio and predictable release kinetics for the encapsulated payloads. We describe self-assembly of polymeric particles, whereby competitive kinetics of viscous sedimentation, diffusion, and cross-linking yield a controllable toroidal-spiral (T-S) structure. Precursor polymeric droplets are splashed through the surface of a less dense, miscible solution, after which viscous forces entrain the surrounding bulk solution into the sedimenting polymer drop to form T-S channels. The intricate structure forms because low interfacial tension between the two miscible solutions is dominated by viscous forces. The biocompatible polymer, poly(ethylene glycol) diacrylate (PEG-DA), is used to demonstrate the solidification of the T-S shapes at various configurational stages by UV-triggered cross-linking. The dimensions of the channels are controlled by Weber number during impact on the surface, and Reynolds number and viscosity ratio during subsequent sedimentation. We anticipate applications of the T-S particle in drug delivery, wherein diffusion through these T-S channels and the polymer matrix would offer parallel release pathways for molecules of different sizes. Polyphosphate, as a model macromolecule, is entrained in T-S particles during their formation. The in vitro release kinetics of polyphosphate from the T-S particles with various channel length and width is reported. In addition, self-assembly of T-S particles occurs in a single step under benign conditions for delicate macromolecules, and appears conducive to scaleup.