Testing equality in lisp-like environments

A function is presented to test equality between lists. In any case the function requires at most one single traversal of the lists and behaves as follows:

1. if there are no cycles, it works as standardEQU AL functions;
2. if there are cycles, it does not give information about equality, but it can detect cycles, i.e. it signals which lists are cyclic.

A simplified version of the function is also considered which is always at least as efficient as standardEQU AL; it grants protection against cycles without signaling them. A coroutine organized version of the function is shown.     

Thermogravimetric and differential scanning calorimetric investigations of manganese–glycine interactions

Thermogravimetric (t.g.) and differential scanning calorimetric (d.s.c.) data have been used to study metal–amino acid interactions in adducts of general formula MnCl₂ · ngly (gly = glycine, n = 0.7, 2.0, 4.0 and 5.0). All the prepared adducts exhibit only a one step mass loss associated with the release of glycine molecules, except for the 0.7gly adduct, which exhibits two glycine mass loss steps. From d.s.c. data, the enthalpy values associated with the glycine mass loss can be calculated: MnCl₂ · 0.7gly = 409 and 399 kJ mol^–1, MnCl₂ · 2.0gly = 216 kJ mol^–1, MnCl₂ · 4.0gly = 326 kJ mol^–1 and MnCl₂ · 5.0gly = 423 kJ mol^–1, respectively. The enthalpy associated with the ligand loss, plotted as function of the number of ligands for the n = 2.0, 4.0 and 5.0 adducts, gave a linear correlation, fitting the equation: H (ligand loss)/kJ mol^–1 = 67 × (number of ligands, n) + 76. A similar result was achieved when the enthalpy associated with the ligand loss was plotted as a function of the _a(COO^–) bands associated with the coordination through the carboxylate group, 1571, 1575 and 1577 cm^–1, respectively, for the n = 2.0, 4.0 and 5.0 adducts, giving the equation H (ligand loss) /kJ mol^–1 = 33.5 × _a(COO^–) /cm^–1 – 52418.5. This simple equation provides evidence for the enthalpy associated with the ligand loss being very closely related to the electronic density associated with the metal–amino acid bonds.     

2‐Chloro‐4,5‐dihydroimidazole,Part X. Revisiting route to N‐heteroarylimidazolidin‐2‐ones

The ureidation reactions of 2‐ and 4‐picoline N‐oxides with 2‐chloro‐4,5‐dihydroimidazole are described. A mechanism of novel thioureidation reaction of 4‐picoline N‐oxide with 2‐(4,5‐dihydro‐1H‐imidazol‐2‐ylthioxy)‐4,5‐dihydro‐1H‐imidazole is proposed. Structural assignment is confirmed by ¹H and ¹³C nmr as well as by X‐ray crystallography.     

Heterocyclen aus α-nitroolefinen. XI . 1,2-oxazine aus α-nitroolefinen und β-dicarbonylverbindungen

Dihydro-1,2-oxazines 8 and 12-oxazines 12 are formed by the reaction of the nitronic acids of the adducts of α-nitroolefins and β-dicarbonyl compounds ( 6 ) by two ways: A ) The nitronic acids 6 are heated in a boiling solution of urea in ethanol or methanol. B ) The nitronic acids 6 are reduced with an aqueous solution of ammoniachloride and sodium sulfide. ¹H-nmr and ¹³C-nmr investigations prove the constitutions. The mechanism is discussed.     

Fourier transform-ion cyclotron resonance study of the gas-phase acidities of germane and methylgermane; Bond dissociation energy of germane

An accurate gas-phase acidity for germane (enthalpy scale, equivalent to the proton affinity of GeH₃ ^?), ΔH _acid ^o(GeH₄) = 1502.0 ± 5.1 kJ mol^?1, is obtained by constructing a consistent acidity ladder between GeH₄, and H₂S by using Fourier transform-ion cyclotron resonance spectrometry, and 0 and 298.15 K values for the first bond dissociation energy of GeH₄ are proposed: D₀ ^o(H₃Ge-H) = 352 ± 9 kJ mol^?1; D ^o(H₃Ge-H) = 358 ± 9 kJ mol^?1, respectively. These results are compared with experimental and theoretical data reported in the literature. Methylgermane was found to be a weaker acid than germane by approximately 35 kJ mol^?1: ΔH _acid ^o = 1536.6 kJ mol^?1.     

The state of conservation of painted surfaces in the presence of accelerated ageing processes monitored by use of FT-Raman spectroscopy and multivariate control charts

A new method has been developed for monitoring the degradation of paintings. Two inorganic pigments (ultramarine blue and red ochre) were blended with linseed oil and spread on canvas. Each canvas was subjected to simulated accelerated ageing in the presence of typical degradation agents (UV radiation and acidic solution). Periodically the painted surfaces were analysed by FT-Raman, to investigate the status of the surface. The data obtained were analysed by principal component analysis (PCA). Finally the Shewhart and cumulative sum control charts based on the relevant principal components (PC) and the so called scores monitoring and residuals tracking (SMART) charts were built. The method based on the use of PC to describe the process was found to enable identification of the presence of relevant modification occurring on the surface of the samples studied.Electronic supplementary material Supplementary material is available for this article at     

Synthesis of functionalized polyhedral oligomeric silsesquioxane (POSS) macromers by microwave assisted 1,3-dipolar cycloaddition

In this paper we report the first synthesis of isoxazolidine and isoxazoline-POSS macromers by 1,3-dipolar cycloaddition reactions of vinyl- and styryl-POSS with N-methyl-C-ethoxycarbonylnitrone and ethoxycarbonyl nitrile oxide, promoted by microwave irradiation. The nature of the resulting cycloadducts has been determined by NOE experiments and supported by computational studies at PM3 and DFT B3LYP/6-31G* levels.     

Synthesis, crystal structure, spectroscopic and electrochemical characterization of the dinuclear complex {tetra-μ-[(±)-2-(p-methoxyphenoxy)-propionato-O,O′]bis(aqua)dicopper(II)}

Structural, electrochemical and spectroscopic data of a new dinuclear copper(II) complex with (±)-2-(p-methoxyphenoxy)propionic acid are reported. The complex {tetra-μ-[(±)-2-(p-methoxyphenoxy)propionato-O,O′]-bis(aqua)dicopper(II)} crystallizes in the monoclinic system, space group P2₁/n with a = 14.149(1) ?, b = 7.495(1) ?, c = 19.827(1) ?, β = 90.62(1) and Z = 4. X-ray diffraction data show that the two copper(II) ions are held together through four carboxylate bridges, coordinated as equatorial ligands in square pyramidal geometry. The coordination sphere around each copper ion is completed by two water molecules as axial ligands. Thermogravimetric data are consistent with such results. The ligand has an “L” type shape due to the angle formed by the β-carbon of the propionic chain and the linked p-methoxyphenoxy group. This conformation contributes to the occurrence of a peculiar structure of the complex. The complex retains its dinuclear nature when dissolved in acetonitrile, but it decomposes into the corresponding mononuclear species if dissolved in ethanol, according to the EPR measurements. Further, cyclic voltammograms of the complex in acetonitrile show that the dinuclear species maintains the same structure, in agreement with the EPR data in this solvent. The voltammogram shows two irreversible reduction waves at E _pc = −0.73 and −1.04 V vs. Ag/AgCl assigned to the Cu(II)/Cu(I) and Cu(I)/Cu° redox couples, respectively, and two successive oxidation waves at E _pa =− 0.01 and +1.41 V vs. Ag/AgCl, assigned to the Cu°/Cu(I) and Cu(I)/Cu(II) redox couples, respectively, in addition to the oxidation waves of the carboxylate ligand.     

Bia-amperometric quantification of salbutamol in pharmaceutical products

This paper presents a simple, rapid and reproducible method of analysis of salbutamol in pharmaceutical products, utilizing batch injection analysis (BIA) associated with amperometric detection. A study of salbutamol oxidation demonstrated a strong dependence between electrode fouling and pH. All determinations were done utilizing a glassy carbon electrode in presence of 3.0 mol l⁻¹ NaOH. A large linear dynamic range from 8×10⁻⁷ to 2×10⁻⁴ mol l⁻¹ was obtained by using an injected volume of 100 μl with a detection limit of 2.5×10⁻⁷ mol l⁻¹. R.S.D. of 0.92% for 50 successive injections of 4×10⁻⁶ mol l⁻¹ of salbutamol and a sample throughput of 60 samples per hour were achieved. The method was applied for salbutamol quantification in syrups.