Magnetic particles functionalized with PAMAM-dendrimers and antibodies: a new system for an ELISA method able to detect Ara h3/4 peanut allergen in foods

An innovative enzyme-linked immunosorbent assay (ELISA) format based on antibody-coated magnetic micro-particles (MPs) for the sensitive detection of Ara h3/4 allergen in food is described. The immunosupport is suspended in the incubation solutions and the MPs with the captured allergen can be easily harvested on a magnet, separated from the solutions, and washed using an easy-to-use, fast and selective approach that allows its detection and quantification. Two differently coated MPs, ProteinA-Pn-b and MP-NH₂-PAMAM G 1.5 -Pn-b immunosupports, were tested. The functionalization of the MPs with PAMAM-sodium carboxylate dendrimers elicits a major stability on the immunoglobulin activity resulting in a threefold enhancement of the analytical sensitivity for the assay with respect to a ProteinA immobilization. Validation was carried out on two different matrices: corn flakes and biscuits. In the case of MP-NH₂-PAMAM G 1.5 -Pn-b immunosupport, limit of detection was found to be 0.2 mg peanuts/kg matrix in both matrices; the linear response range was demonstrated from 2.5 to 15 mg peanuts/kg matrix by performing statistical tests (homoscedasticity and Mandel fitting tests). Good accuracy and recovery (>80 ± 2%) were obtained. Different food samples were tested and the results were compared with those obtained with a commercially available ELISA kit. The results obtained in this work demonstrated the applicability of the immunomagnetic ELISA methods on real samples and the possibility to perform the assay with significantly reduced reagent and sample consumption.     

Polysaccharide from <Emphasis Type=Italic>Anacardium occidentale</Emphasis> L. tree gum (Policaju) as a coating for Tommy Atkins mangoes

Policaju-based coatings were applied on “Tommy Atkins” mangoes and the effects of four different treatments on mango shelf-life were evaluated under storage condition at 4°C and 82 % of relative humidity over 28 days. The surface tension of mangoes was found to be 29.04 mN m⁻¹; the dispersive and polar components were 27.57 mN m⁻¹ and 1.47 mN m⁻¹, respectively, and the critical surface tension was 22.7 mN m⁻¹. A significantly lower mass loss was observed in all mangoes treated with Policaju-based coatings. For all applied treatments, no significant variation in the total soluble solids and pH was detected over the experimental storage time. The results show that Policaju-based coatings have a positive effect on the shelf-life extension of mangoes at low storage temperatures (4°C).     

Development of an analytical methodology to quantify melamine in milk using micellar liquid chromatography and validation according to EU Regulation 2002/654/EC

Melamine is a toxic triazine, illegally used as an additive in milk to apparently increase the amount of protein. A chromatographic procedure using a C18 column and a micellar mobile phase of sodium dodecyl sulphate (0.05 M) and propanol (7.5%), buffered at pH 3, and a detection set by absorbance at 210 nm, was reported for the resolution and quantification of melamine in liquid and powdered milk samples. In this work, samples were diluted with a SDS solution and were directly injected, thus avoiding long extraction and experimental procedures. Melamine was eluted in nearly 9.3 min without overlapping the protein band or other endogeneous compounds. The optimal mobile phase composition was taken using a chemometrical approach that considers the retention factor, efficiency and peak shape. Validation was performed following the European Commission's indications (European Decision 2002/657/EC), and the main analytical parameters studied were: linearity (0.02-100 ppm; r² = 0.999), limit of detection (5 ppb), intra- and inter-day precision (R.S.D. <7.6% and <9.7%, respectively) and robustness (R.S.D. <7.4% for retention time and <5.0% for area). Sensitivity was adequate to detect melamine under the safety limits proposed by the US FDA. Finally, recoveries for several milk samples were found in the 85-109% range.     

Synthesis of aromatic tetracyclic tin compounds by template and transmetallation reactions: Alkyl vs aryl migration from tin to nitrogen

The syntheses of [bis(3,5-di-tert-butyl-2-hydroxy-2-phenyl)amine]diphenyltin (1) and [bis(3,5-di-tert-butyl-2-hydroxy-2-phenyl)amine]dichloro-phenyl-stannate (2) by template reactions using 3,5-di-tert-butylcatechol, aqueous ammonia and SnPh₂Cl₂ are reported. We also report the syntheses of compounds 2, [bis(3,5-di-tert-butyl-2-hydroxy-2-phenyl)amine]trichloro-stannate (4), [bis(3,5-di-tert-butyl-2-hydroxy-2-phenyl)methylamine]chloro-methyltin (5), and [bis(3,5-di-tert-butyl-2-hydroxy-2-phenyl)-n-butylamine]n-butyl-chlorotin (6) and [bis(3,5-di-tert-butyl-2-hydroxy-2-phenyl)amine]n-butyl-dichloro-stannate (7), performed by transmetallation reactions of the octahedral zinc coordination compound Zn[3,5-di-tert-butyl-1,2-quinone-(3,5-di-tert-butyl-2-hydroxy-1-phenyl)imine]₂ (3) with SnPhCl₃ or SnPh₂Cl₂, SnCl₄, SnMe₂Cl₂, Sn(nBu)₂Cl₂ and Sn(nBu)Cl₃, respectively. The X-ray diffraction structures of compounds 1, 2, 4 and 6 are reported. The transmetallation reactions with Sn(alkyl)₂Cl₂ afforded pentacoordinated tin compounds, where an alkyl group migrated from tin to nitrogen, while similar reactions with Sn-Ph compounds did not present any phenyl group migration.     

Extending the applicability of pressurized hot water extraction to compounds exhibiting limited water solubility by pH control: curcumin from the turmeric rhizome

Pressurized hot water extraction (PHWE, also known as subcritical water extraction) is commonly considered to be an environmentally friendly extraction technique that could potentially replace traditional methods that use organic solvents. Unfortunately, the applicability of this technique is often limited by the very low water solubility of the target compounds, even at high temperatures. In this paper, the scope for broadening the applicability of PHWE by adjusting the pH of the water used in the extraction is demonstrated in the extraction of curcumin (which exhibits very limited water solubility) from untreated turmeric (Curcuma longa L.) rhizomes. Although poor extraction yields were obtained, even at high temperatures when using degassed water or neutral phosphate buffer as the extraction medium, yields exceeding those obtained by Soxhlet extraction were achieved using highly acidic pH buffers due to curcumin protonation. The influence of the temperature, pH, and buffer concentration on the extraction yield were investigated in detail by means of a series of designed experiments. Optimized conditions for the extraction of curcumin from turmeric by PHWE were estimated at 197 °C using 62 g/L buffer concentration at pH 1.6. The relationships between these variables were subjected to statistical analysis using response surface methodology.     

Analysis of multi-class preservatives in leave-on and rinse-off cosmetics by matrix solid-phase dispersion

Matrix solid-phase extraction has been successfully applied for the determination of multi-class preservatives in a wide variety of cosmetic samples including rinse-off and leave-on products. After extraction, derivatization with acetic anhydride, and gas chromatography–mass spectrometry analysis were performed. Optimization studies were done on real non-spiked and spiked leave-on and rinse-off cosmetic samples. The selection of the most suitable extraction conditions was made using statistical tools such as ANOVA, as well as factorial experimental designs. The final optimized conditions were common for both groups of cosmetics and included the dispersion of the sample with Florisil (1:4), and the elution of the MSPD column with 5 mL of hexane/acetone (1:1). After derivatization, the extract was analyzed without any further clean-up or concentration step. Accuracy, precision, linearity and detection limits were evaluated to assess the performance of the proposed method. The recovery studies on leave-on and rinse-off cosmetics gave satisfactory values (>78% for all analytes in all the samples) with an average relative standard deviation value of 4.2%. The quantification limits were well below those set by the international cosmetic regulations, making this multi-component analytical method suitable for routine control. The analysis of a broad range of cosmetics including body milk, moisturizing creams, anti-stretch marks creams, hand creams, deodorant, shampoos, liquid soaps, makeup, sun milk, hand soaps, among others, demonstrated the high use of most of the target preservatives, especially butylated hydroxytoluene, methylparaben, propylparaben, and butylparaben.     

Influence of pH on the incorporation and growth of Pb<Subscript>2</Subscript>CrO<Subscript>5</Subscript> crystallites in silica matrix

Pb₂CrO₅ nanoparticles were embedded in an amorphous SiO₂ matrix by the sol–gel process. The pH and heat treatment effects were evaluated in terms of structural, microstructural and optical properties from Pb₂CrO₅/SiO₂ compounds. X-ray diffraction (XRD), high resolution transmission electron microscopy (HR-TEM), energy dispersive spectroscopy (EDS), and diffuse reflectance techniques were employed. Kubelka–Munk theory was used to calculate diffuse reflectance spectra that were compared to the experimental results. Finally, colorimetric coordinates of the Pb₂CrO₅/SiO₂ compounds were shown and discussed. In general, an acid pH initially dissolves Pb₂CrO₅ nanoparticles and following heat treatment at 600 °C crystallized into PbCrO₄ composition with grain size around 6 nm in SiO₂ matrix. No Pb₂CrO₅ solubilization was observed for basic pH. These nanoparticles were incorporated in silica matrix showing a variety of color ranging from yellow to orange.     

Thermal analysis of hair treated with oxidative hair dye under influence of conditioners agents

This research aimed the effect on Caucasian hair tresses treated with oxidative hair dye, either incorporated or not with conditioners agents, analyzed by Differential Scanning Calorimetry (DSC) and Thermogravimetric analysis (TG). The formulations of hair dyes were emulsions oil-in-water with light blond color containing or not the conditioners agents: silanetriol and panthenol; PEG-12 dimethicone; hydrolyzed silk, hydrolyzed milk protein, and lactose. Each dye (1.5 g) was applied in the hair tress (2.0 g/20.0 cm of length of Caucasian light-brown), previously treated, more 1.5 g of hydrogen peroxide 20 vol during 40 min. Evaluation of mass loss of the different hair sample demonstrates that these chemical hair treatments impair the hair fibers, reduced their moisture content with respect to the untreated hair. The incorporation of conditioners agents (silanetriol and panthenol; PEG-12 dimethicone; hydrolyzed silk, hydrolyzed milk protein, and lactose) in oxidative hair dyes types did not decrease the damage caused on the tresses by the coloring process quantified by TG/DTG. However, the DSC curves demonstrated those conditioners agents (silanetriol and panthenol; PEG-12 dimethicone) dislocated the beginning of the third event in 20 °C and they inhibited the presence of the fourth event, having characterized thermal protection to the hair.     

Experimental and computational study on the reactivity of 2,3-bis[(3-pyridylmethyl)amino]-2(Z)-butene-1,4-dinitrile, a key intermediate for the synthesis of tribenzoporphyrazine bearing peripheral methyl(3-pyridylmethyl)amino substituents

Abstract  

An earlier developed alkylating path leading to tetraalkylated diaminomaleonitrile derivatives was explored. Attempts to explain the reactivity of the representative dialkylated diaminomaleonitrile 2,3-bis[(3-pyridylmethyl)amino]-2(Z)-butene-1,4-dinitrile during the alkylation reaction were performed using X-ray and density functional theory (DFT) studies. The condensed Fukui functions accompanied by softness indices were found to be useful in explaining its reactivity observed during the reaction. The values of the Fukui functions and condensed softness for electrophilic attack calculated from Mulliken, L?wdin, and natural population analyses closely corresponded to the experimental observations. When 2,3-bis[(3-pyridylmethyl)amino]-2(Z)-butene-1,4-dinitrile disodium salt was treated with dimethyl sulfate at lower temperatures the alkylation reaction prevailed, whereas at higher temperatures the alkylating agent acted as a hydride anion acceptor, which favored the elimination reaction. The tetraalkylated dinitrile 2,3-bis[methyl(3-pyridylmethyl)amino]-2(Z)-butene-1,4-dinitrile was used in the synthesis of tribenzoporphyrazine bearing methyl(3-pyridylmethyl)amino groups, which was subsequently subjected to solvatochromic and metallation studies. The changes observed during metallation seem to result from the coordination of the 3-pyridyl group by a palladium ion. This could influence the configuration of the methyl(3-pyridylmethyl)amino moiety, causing more effective donation of a lone pair of electrons from peripheral nitrogen to the macrocyclic ring.     

Influence of crystal polymorphism on mechanical and barrier properties of poly(l-lactic acid)

The effect of crystal polymorphism on barrier and mechanical properties of PLLA is detailed in this contribution. PLLA films containing different amounts of α and α′ crystal forms were prepared by annealing quenched PLLA at different temperatures. The polymorphic structure of the films was analyzed by X-ray diffraction. Mechanical properties and permeability to water vapor were investigated as a function of degree of crystallinity (w_C) and related to crystal polymorphism developed during annealing. The polymorphic structure of PLLA significantly affects mechanical and barrier properties. The α crystal modification provides a better barrier to water vapor and a higher Young’s modulus, compared to films containing the α′ modification, but a lower elongation at break. The varied barrier and mechanical properties were correlated to the different packing of PLLA chains in the two analyzed polymorphs. The conformational disorder of the α′ form makes this structure a mesophase (condis crystal), with remarkable effects on material properties.