Acceleration of the Passerini reaction in the presence of nucleophilic additives

An accelerating effect of nucleophilic additives was revealed for the Passerini multi-component reaction. The influence of aqueous solutions on the reaction rate was studied in detail and the direct involvement of water in the bond-making step was attributed as the basis of an accelerating effect. Other nucleophiles were tested as alternatives to water; as a result N-hydroxysuccinimide is proposed as an accelerant of the Passerini reaction.     

Production of antitumoral retamycin during fed-batch fermentations of Streptomyces olindensis

Fed-batch runs were performed in order to correlate the production of retamycin, an anthracycline antibiotic produced by Streptomyces olindensis in submerged cultures, with the specific growth rate. Maximum retamycin production was achieved with an exponential feed rate, controlling the specific growth rate at a low value (0.03 h-1, about 10% of the maximum specific growth rate). Control of the specific growth rate at higher values (0.10 and 0.17 h-1) caused a decrease in antibiotic production. Morphology, assessed by image analysis, was shown to be highly relevant in this process. Cell growth mainly in the form of clumps (90% clumps and 10% free filaments) led to better results than growth as clumps (75%) and free filaments (25%).     

Association of model peptides and dehydropeptides: N-acetyl-l-alanine- and dehydroalanine N′,N′-dimethylamides

The comparative studies on the association of Ac-ΔAla-NMe₂ and Ac-l-Ala-NMe₂ in carbon tetrachloride were performed by the analysis of their average molecular weight, dipole moments and FTIR spectra. To aid spectroscopic interpretation and gain some deeper insight into the nature of associates, the geometries of the minimum energy of the dimers of Ac-ΔAla-NMe₂ and Ac-l-Ala-NMe₂ were calculated by the B3LYP/6-31+G** method. The average molecular weight in the studied concentration range, for the ΔAla and l-Ala peptide, as determined by the osmometric method, did not exceed 1.5 and 1.2 of the monomeric mass, respectively. Accordingly, the percentage of the monomeric form (α) decreased as concentration was increased more significantly for the ΔAla analogue than for its saturated counterpart. In the studied concentrations, the dipole moment of the unsaturated compound decreases and that of its counterpart is almost constant. We identified a wider range of dimeric forms of Ac-ΔAla-NMe₂ than those of Ac-l-Ala-NMe₂. While Ac-ΔAla-NMe₂ mainly forms cyclic dimers, built of open conformers H/F, specific for α,β-dehydroamino acids, Ac-l-Ala-NMe₂ forms cyclic and linear dimers, characteristic for the usual amino acids. Ac-ΔAla-NMe₂ has a greater tendency to associate than its saturated variant, which is the result of stronger hydrogen bonds.     

Single electron traps at the surface of polycrystalline MgO: assignment of the main trapping sites

Paramagnetic centers at the surface of ionic oxides in the form of trapped electrons can be generated by exposure of the material to alkali metal or hydrogen atoms or of molecular hydrogen under UV irradiation. For many years, it has been assumed that the resulting paramagnetic centers consist of oxygen vacancies filled by one electron. High-resolution electron spin resonance spectra and ab initio quantum chemical calculations show that the paramagnetic centers consist of (H(+))(e(-)) electron pairs formed at morphological irregularities of the surface. At least three different kinds of (H(+))(e(-)) centers, [A], [B], and [C], have been identified with abundances of 80%, 10%, and 8%, respectively. In this work, we compare a wide set of measured and computed g-factors and hyperfine coupling constants of the unpaired electron with the surrounding (25)Mg, (17)O, and (1)H nuclei and we propose a general assignment of the centers. (H(+))(e(-)) pairs formed at Mg(4c) ions at steps and edges account for species [A], centers formed at Mg(4c) ions at reverse corners correspond to species [B], and species [C] originates from (H(+))(e(-)) pairs formed at Mg(3c) ions at corners and kinks.     

Electrospray ionization quadrupole time-of-flight and matrix-assisted laser desorption/ionization tandem time-of-flight mass spectrometric analyses to solve micro-heterogeneity in post-translationally modified peptides from Phoneutria nigriventer (Aranea, Ctenidae) venom

Previous studies of the fractionated venom of the Brazilian armed spider Phoneutria nigriventer, obtained by gel filtration, have demonstrated the presence of a fraction PhM, a pool of small peptides (up to 2000 Da) that provoke contractions in smooth muscle of guinea pig ileum. Initial attempts to sequence these peptides were largely unsuccessful because of the low purification yield and the fact that the majority seemed to be blocked at their N-termini. In the present work, analysis of this venom fraction by mass spectrometry has revealed the existence of a highly complex mixture of peptides with molecular weights corresponding to those observed for the muscle-active peptides previously described (800-1800 Da). These peptides appear to be a family of isoforms with some particular features. The amino acid sequences of 15 isoforms have been determined by tandem mass spectrometry (MS/MS) using both electrospray ionization quadrupole time-of-flight mass spectrometry (ESI-Q/ToFMS) and matrix-assisted laser desorption/ionization tandem time-of-flight mass spectrometry (MALDI-ToF/ToFMS). These molecules contain post-translational modifications such as proteolysis and C-terminal amidation, which combine to generate additional isoforms. All the isoforms sequenced in this study possess an N-terminal pyroglutamic acid residue. A search for sequence similarities with other peptides in databanks revealed that these peptides are structurally related to the tachykinins, a family of neuro-hormone peptides. The data obtained in this study will be essential for the subsequent steps of this research, the synthesis of these peptides and pharmacological characterization of their biological activity.     

Coupling Cloud Point Extraction to Instrumental Detection Systems for Metal Analysis

The purpose of this article is to review and evaluate cloud point extraction of metals and its coupling to different contemporary instrumental methods of analysis. This review covers a selection of the literature published on this topic over the period mainly between 1997 and September 2005 (consisting of 50 publications). The current state of the art for CPE concerning metals and metal chelates is presented with special emphasis on the hyphenation of this interesting extraction/preconcentration approach mediated by surfactants to spectrophotometry, atomic spectroscopy and separation techniques. We present contemporary CPE developments concerning metal speciation and determination and their application to different environmental, clinical, geological and food samples. Strategies for method development as well as future perspectives are also covered.     

Study of the catalytic behavior of montmorillonite/iron(III) and Mn(III) cationic porphyrins

Two samples of montmorillonite (one of Brazilian origin, BNC1 clay, and the other STX-1, supplied by the Clay Mineral Society Repository (University of Missouri, USA) were allowed to react with biomimetic metalloporphyrins of Fe(III) and Mn(III) in cationic form. The compounds were characterized by several techniques, showing that the metalloporphyrins molecules were adsorbed at the surface of the clay platelet crystals. The catalytic activities of the intercalated complexes for the oxidation of alkane were dependent upon the concentration of the porphyrin immobilized in the clay and factors such as the metal ion species in the porphyrins, choice of solvent, and concentration of the iodosylbenzene oxidant. Good selectivity to cyclohexanol instead of cyclohexanone was observed for the catalytic oxidation of cyclohexane by iodosylbenzene.     

Structural and mechanistic look at the orthoplatination of aryl oximes by dichlorobis(sulfoxide or sulfide)platinum(II) complexes

Structural and mechanistic aspects of orthoplatination of acetophenone and benzaldehyde oximes by the platinum(II) sulfoxide and sulfide complexes [PtCl(2)L(2)] (2, L = SOMe(2) (a), rac-SOMePh (b), R-SOMe(C(6)H(4)Me-4) (c), and SMe(2) (d)) to afford the corresponding platinacycles cis-(C,S)-[Pt(II)(C(6)H(3)-2-CR'=NOH-5-R)Cl(L)] (3, R, R' = H, Me) have been investigated. The reaction of acetophenone oxime with sulfoxide complex 2a in methanol solvent occurs noticeably faster than with sulfide complex 2d due to the fact that the sulfoxide is a much better platinum(II) leaving ligand than the sulfide. Evidence is presented that the orthoplatination is a multistep process. The formation of unreactive dichlorobis(N-oxime)platinum(II) cations accounts for the rate retardation by excess acetophenone oxime and suggests the importance of pseudocoordinatively unsaturated species for the C-H bond activation by Pt(II). A comparative X-ray structural study of dimethyl sulfoxide platinacycle 3b (R = R' = Me) and its sulfide analogue 3e (R = H, R' = Me), as well as of SOMePh complex 3c (R = H, R' = Me), indicated that they are structurally similar and a sulfur ligand is coordinated in the cis position with respect to the sigma-bound phenyl carbon. The differences concern the Pt-S bond distance, which is notably longer in the sulfide complex 3e (2.2677(11) A) as compared to that in sulfoxide complexes 3b (2.201(2)-2.215(2) A) and 3c (2.2196(12) A). Whereas the metal plane is practically a plane of symmetry in 3b due to the H-bonding between the sulfoxide oxygen and the proton at carbon ortho to the Pt-C bond, an S-bonded methyl of SOMePh and SMe(2) is basically in the platinum(II) plane in complexes 3c and 3e, respectively. There are intra- and intermolecular hydrogen bond networks in complex 3b. An interesting structural feature of complex 3c is that the two independent molecules in the asymmetric unit of the crystal reveal an extremely short Pt-Pt contact of 3.337 A.     

Bioavailability, bioaccumulation and tolerance of chromium: consequences in the food chain of freshwater ecosystems

Many abiotic and biotic factors can influence the partitioning equilibrium of heavy metals, thus influencing metal impact on aquatic environments. Unicellular algal species release soluble organic substances able to complex metals. In our laboratory a Cr-tolerant strain was selected and isolated from a wild type strain of Scenedesmus acutus. The exudates released by the two strains counteracted the growth inhibition caused by Cr(VI) and the exudates of the Cr-tolerant strain were more effective. On the contrary, the exudates did not reduce chromium toxicity to the cladoceran Daphnia magna. The reduction of chromium effect on algae seems the consequence of an algae-specific interaction among Cr(VI), exudates and algal cells. Chromium uptake resulted to be energy-dependent since bioaccumulation rate in subdued light condition was lower than at high light intensity. The effect of Cr(VI) on algae changed depending on metabolism of the cells and in particular it seemed to be related to the bioaccumulation rate. Tolerance in the selected strain could not be ascribed to a lower uptake of chromium. The difference in sensitivity to chromium between the two strains was exploited to evaluate if tolerance acquired by algae could have consequences for Daphnia. After treatment with Cr(VI), the two strains of S. acutus were used as food source for D. magna. The results indicate that chromium is accumulated by algae in a form not available for daphnids and that Cr tolerance acquired by the algae can be of some advantage to the consumer organism.     

4,5-Dihydroisoxazole and 4,5-dihydro-1,2,4-oxadiazole derivatives from cycloaddition reactions of nitrile oxides to alkyl N-(diphenylmethylene)-α,β-dehydroamino acids

The alkyl N-(diphenylmethylene)-α,β-dehydroamino acids 1 have been submitted to 1,3-dipolar cycloadditions with nitrile oxides. The reactivity of these compounds depends on the type and on the stereochemistry of the β-substituents. With the unsubstituted terms 1a,b the reaction occurs on the C,C double bond, providing a good method for the synthesis of the 4,5-dihydroisoxazole derivatives 3a,b,c and for the gem-functionalized 4,5-dihydroisoxazoles amino carboxylic ester 5. The β-substituted compounds 1c,d,e , inert to 1,1-dimethylethylnitrile oxide, undergo the reaction to the N,C double bond, thus giving with 2a,b the 4,5-dihydro-1,2,4-oxadiazole derivatives 4. All the reactions occur with high site- and regioselectivity.