The reaction of pyrroles with trimethylhalosilanes-dialkyl sulfoxides

Pyrroles are powerful nucleophiles in the reaction with dialkyl sulfoxides and trimethylchlorosilane (TMCS) or trimethylbromosilane (TMBS), affording sulfonium salts or halo derivatives, generally in good yields.     

Electrodynamic investigations of conduction processes in humid microcrystalline cellulose tablets

The conduction mechanism in microcrystalline cellulose (MCC) tablets at varying relative humidity (RH) has been investigated by using the techniques of low frequency dielectric spectroscopy and transient current analysis at room temperature. The dependence on RH on the measured conductivity and charge carrier density indicates that a high-power-law-exponent percolation process of cations being conducted on water molecules occupying available 6-OH units on the cellulose chains is the dominating dc conduction mechanism at RH below 3 wt % of moisture content. The experimentally observed decrease in charge carrier mobility with increasing moisture content shows that protons and H3O+ ions that are being blocked at empty 6-OH sites also contribute to the charge transport process in cellulose at low moisture contents.     

Solid-state photodimerization of steroid enones

Androst-4-ene-3,17-dione (1) and 17alpha-methyltestosterone (2) are dimerized in the solid-state by UV radiation. These substances were selected by a search in the CSD among the steroid enones presenting in the crystalline state an intermolecular short contact between a hydrogen alpha to a carbonyl group and the oxygen of an enone system. Dimerization occurs by transfer of the hydrogen to the oxygen and connection between the two involved carbons. Androst-4-ene-3,17-dione (1) affords dimer 3 and trimer 4, both formed by connection of the C-16 of a molecule with the C-3 of a near one. Irradiation of 17alpha-methyltestosterone (2) gives the isomeric trienones 5 and 6. These compounds are reasonably formed by dehydration of unisolated intermediate products 7 and/or 8 obtained by coupling of two molecules through a linkage between the C-2 and the C-3' carbons. The formation mechanisms of the photoproducts are satisfactory explained on the basis of the molecular arrangement of the monomers in the crystal state. Modeling of the dimeric molecules was done using molecular mechanics calculations. A single-crystal X-ray of the dimer of androst-4-ene-3,17-dione confirms the structural interpretation of spectral data. The conformer found in the solid-state agrees well with the results of molecular mechanics calculations.     

Formation of adenine-N3/guanine-N7 cross-link in the reaction of trans-oriented platinum substrates with dinucleotides

The reactions of the anticancer complex trans-[PtCl2{(E)-HN=C(OMe)Me}2] (trans-EE) with a series of ribo and deoxyribodinucleotides have been studied by HPLC and 2D [1H, 15N] HMQC NMR spectroscopy and compared with those of the inactive trans isomer of cisplatin, trans-[PtCl2(NH3)2] (trans-DDP). Reactions of trans-EE with r(ApG) and d(ApG) take place through solvolysis of the starting substrate and subsequent formation of trans G-N7/monochloro and G-N7/monoaqua adducts. Slowly, the monofunctional adducts evolve to a bifunctional adduct forming an unprecedented and unexpected A-N3/G-N7 platinum cross-link spanning two trans positions. For stereochemical reasons, trans platinum complexes cannot form N7/N7 cross-links between adjacent purines in di- or polynucleotides. For the reverse sequence r(GpA), no chelate structure was formed even after a two-week reaction. The reaction of trans-DDP with r(ApG) produces many more products than the analogous reaction with trans-EE. One of these products was identified as the A-N3/G-N7 trans-chelate.     

New developments in the synthesis of pyrrolizidinone-based dipeptide isosteres

1,3-Dipolar cycloaddition of acrylamide with the cyclic nitrone derived from proline tert-butyl ester has been employed in the synthesis of bicyclic Gly-(s-cis)Pro isosteres suitably protected for the Fmoc-based solid phase peptide synthesis. (R)-1-Phenylethylamine was introduced as chiral auxiliary to resolve racemic intermediates and obtain enantiopure compounds. Using methacrylamide as dipolarophile, the analogous Ala-Pro mimetics have been prepared in racemic form, whereas the same strategy applied to methyl itaconate failed to give the corresponding Asp-Pro mimetic.     

Interactions of diethylenetriaminepentaacetic acid (dtpa) and triethylenetetraaminehexaacetic acid (ttha) with major components of natural waters

The binding ability of diethylene triamine pentaacetate (dtpa(5-)) and triethylene tetraamine hexaacetate (ttha(6-)) ligands towards major components, H(+), Na(+), Mg(2+) and Ca(2+), of natural waters was studied in both single and mixed ionic media at different ionic strengths and at T=25 degrees C. Some measurements, performed in Mg(2+)-Ca(2+) mixtures, allowed us to find the formation of new mixed species MgCa(dtpa), MgCa(ttha) and MgCaH(ttha), here reported for the first time. All the complexes formed in the various systems were characterized in terms of both stoichiometry and stability, and an attempt was made to find general rules for the stability of mixed metal complexes in comparison with that of simple species. To obtain quantitative information on the complexing ability of dtpa and ttha in seawater, measurements have been carried out in artificial seawater ionic medium (Na(+), K(+), Ca(2+), Mg(2+), Cl(-) and SO(4)(2-)). Calculations, performed by considering the salt mixture as single salt BA, allowed us to find some quite stable B(i)H(j)L species. Under the natural seawater conditions [S(salinity)=35], we found for the most important species logbeta( B(dtpa))=9.64 and. Literature data comparison is also reported.     

Ion chromatography characterization of polysaccharides in ancient wall paintings

Specific programming of automated HPLC systems allows total on-line qualification, validation and stability monitoring using the concept of deferred standards. Setting up such a process for routine analyses in an automated HPLC system requires specific autosampler programming as well as specific monitoring software. With an autosampler, a double injection procedure is programmed, the first introducing the sample, and the second, a few minutes deferred, the deferred control standard. Two additional compounds are therefore added to the sample before and during the chromatographic process: the intemal standard for sample quantification and the deferred standard for system control. Specific methodologies are described of how to obtain classical quantitative analysis information as well as system qualification validation stability information. Experiments were performed to develop specified methodologies to monitor the quality of quantitative analysis during the life of the column by using the deferred standard concept to probe the effects of column ageing on separation characteristics.     

Poly(4‐vinylpyridine) as the host ligand of metal‐containing chromophores for second‐order nonlinear optical active materials

Two formulas of grafted polymers with metal‐containing chromophores, potentially suitable for second‐order nonlinear optics applications, are described. Two chromophores were obtained from a tridentate ligand coordinated to Cu(II) or Pd(II) ions. The organometallic chromophore fragments were grafted to poly(4‐vinylpyridine) by the pyridinic nitrogen of the host polymer. Some qualities displayed by the new metallated polymers are remarkable: (1) a high value of the first hyperpolarizability coefficient of the chromophores, (2) a high content of the grafted chromophore in the polymers (up to 60 wt %), (3) a considerable increase in the glass‐transition temperatures (up to 240 °C), (4) good thermal stability in air (ca. 280 °C), and (5) good optical transparency of the films. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2987–2993, 2002     

Electrophoretic properties of complexes between DNA and the cationic surfactant cetyltrimethylammonium bromide

We use agarose gel electrophoresis to characterize how the monovalent catioinic surfactant cetyltrimethylammonium bromide (CTAB) compacts double-stranded DNA, which is detected as a reduction in electrophoretic DNA velocity. The velocity reaches a plateau at a ratio R = 1.8 of CTAB to DNA-phosphate charges, i.e., above the neutralization point, and the complexes retain a net negative charge at least up to R = 200. Condensation experiments on a mixture of two DNA sizes show that the complexes formed contain only one condensed DNA molecule each. These CTAB-DNA globules were further characterized by time-resolved measurements of their velocity inside the gel, which showed that CTAB does not dissociate during the migration but possibly upon entry into the gel. Using the Ogston-model for electrophoresis of spherical particles, the measured in-gel velocity of the globule is quantitatively consistent with CTAB having two opposite effects, reduction of both the electrophoretic charge and DNA coil size. In the case of CTAB the two effects nearly cancel, which can explain why opposite velocity shifts (globule faster than uncomplexed DNA) have been observed with some catioinic condensation agents. Dissociation of the complexes by addition of anionic surfactants was also studied. The DNA release from the globule was complete at a mixing ratio between anionic and cationic surfactants equal to 1, in agreement with equilibrium studies. Circular DNA retained its supercoiling, and this demonstrates a lack of DNA nicking in the compaction-release cycle which is important in DNA transfection and purification applications.     

The effects of cationic and zwitterionic micelles on the keto-enol interconversion of 2-phenylacetylfuran and 2-phenylacetylthiophene

The presence of micelles from cationic and zwitterionic surfactants increases the apparent acidity of either the keto and the enol forms of 2-phenylacetylfuran (2PAF) and 2-phenylacetylthiophene (2PAT). This effect can be attributed to the affinity of the surfactant micelles for the enolate of the two substrates. Although the equilibrium constants for keto-enol tautomerism of 2PAF and 2PAT, K_T=[enol]/[ketone]=pK_a^KH−pK_a^EH, do not change much, the presence of micelles provides an efficient method for producing appreciable quantities of the enolates under mild experimental conditions and in aqueous solutions. The obtained rate-profiles for the ketonisation reactions and the consistency of the kinetic rate constants over a wide range of ‘pH’ in several overlapping buffers indicate that the pH of the aqueous pseudophase (but not that at the micellar surface) can be controlled by buffers. Moreover, the increase of the acidity and the decrease of the ‘water’ rate of ketonisation of the enols of 2PAF and 2PAT upon addition of surfactants allow the uncovery of a metal ion catalysed pathway that cannot be observed in absence of surfactants.