Charge transfer across a polymer gel/liquid interface: determination of ionophores

An electrochemical method for the determination of the ionophores monensin and lasalocid was developed, based on the polarization of an agar gel/nitrobenzene electrolyte interface. The measured current corresponding to the facilitated ion transfer across this interface is directly proportional to the concentration of an ionophore dissolved in the organic phase. Using cyclic voltammetry in a three-electrode system the detection limit for both ionophores is about 3 × 10^?5 M.     

New membrane materials for potassium-selective ion-sensitive field-effect transistors

Several polymeric materials were studied as membrane materials for potassium-selective ion-sensitive field-effect transistors (ISFETs) to overcome the problems related with the use of conventional plasticized poly(vinyl chloride) membranes casted on ISFET gate surfaces. Several acrylate materials, such as ACE, Epocryl and derivatives, showed no reproducible results. Three room-temperature vulcanizing (RTV)-type silicone rubbers were tested. The addition-type RTV-2 silicone rubber was not suitable as a membrane material, but the condensation-type RTV-1 and especially the RTV-2 silicone rubber showed good results. ISFETs with a Silopren membrane showed a durability of at least 2 months.     

Gels of hydrophobically modified ethyl(hydroxyethyl) cellulose cross-linked by amylose: effects of hydrophobe architecture

Previous work has shown that amylose (AM) can cross-link hydrophobically modified polymers by inclusion complexation, whereby thermoreversible cold-setting gels are formed. Here we investigate the complexation of AM with different samples of hydrophobically modified ethyl(hydroxyethyl) cellulose (HMEHEC), distinguished by differences in the architecture of the hydrophobes (the hydrophobic side chains). All hydrophobes, except one, were based on linear alkyl chains, but with varying chain lengths (C12-C14). In addition, some samples contained short hydrophilic "spacers", consisting of 2-5 ethylene oxide units, between the alkyl chains and the EHEC backbone. Gels of varying strength were obtained for the different AM/HMEHEC samples. The alkyl chain length seemed to be the major factor affecting the gel strength, with longer alkyl chains giving stronger gels. For similar alkyl chain lengths, stronger gels were obtained when a spacer was present. Addition of AM caused a small increase of the cloud points of HMEHECs with C14 hydrophobes in water. Time-dependent effects and effects of the sample preparation procedure were also investigated. The reversibility of the gelation with respect to shear was confirmed. A gel destroyed by added surfactant was shown to reform on removal of the surfactant by dialysis.     

Thermodynamic properties of quinoxaline-1,4-dioxide derivatives: a combined experimental and computational study

The mean (N-O) bond dissociation enthalpies were derived for three 2-methyl-3-(R)-quinoxaline 1,4-dioxide (1) derivatives, with R = methyl (1a), ethoxycarbonyl (1b), and benzyl (1c). The standard molar enthalpies of formation in the gaseous state at T = 298.15 K for the three 1 derivatives were determined from the enthalpies of combustion of the crystalline solids and their enthalpies of sublimation. In parallel, accurate density functional theory-based calculations were carried out in order to estimate the gas-phase enthalpies of formation for the corresponding quinoxaline derivatives. Also, theoretical calculations were used to obtain the first and second N-O dissociation enthalpies. These dissociation enthalpies are in excellent agreement with the experimental results herewith reported.     

Relaxation processes of the liquid crystal ME6N in the isotropic phase studied by Raman scattering experiments

We have investigated the Raman profiles of the nu(C[Triple Bond]N) and nu(C=O) vibrational modes of the nematic liquid crystal ME6N (4-cyanophenyl-4(')-hexylbenzoate) in the isotropic phase at different temperatures and used them as probes of the dynamics and structural organization of this liquid. The vibrational time correlation functions of the nu(C[Triple Bond]N) mode, rather adequately interpreted within the assumption of exponential modulation function (the Kubo-Rothschild theory), indicate that the system experiences an intermediate dynamical regime that gets only slightly faster with increasing temperature. However, this theory fails in predicting the non-exponential behavior that the time correlation functions manifest in the long time range (t>3 ps). For this reason we have additionally approached the interpretation of vibrational correlation functions in terms of the theory formulated by Rothschild and co-workers for locally structured liquids. The application of this theory reveals that the molecular dynamics in this liquid crystal in the isotropic phase is that deriving from a distribution of differently sized clusters, which narrows as the temperature increases. Even at the highest temperature reached in this study (87 degrees C above the nematic-isotropic transition), the liquid has not yet achieved the structure of the simple liquid and the dynamics has not reached the limit of the single channel process. The vibrational and orientational relaxations occur in very different time scales. The temperature independence of the orientational dynamics in the whole range from 55 degrees C to 135 degrees C has been referred to the nonhydrodynamic behavior of the system, arising when local pseudonematic structures persist for times longer than the orientational relaxation. The occurrence of the process of resonant vibrational energy transfer between the C=O groups of adjacent molecules has been revealed in the isotropic phase by a slightly positive Raman noncoincidence effect in the band associated with the nu(C=O) mode. A qualitative interpretation is tentatively given in terms of partial cancellation of contributions deriving from structures having opposite orientations of their C=O groups.     

Monoorganomercury and diorganothallium derivatives of 2-thiobarbituric acid

Compounds of type R_nMH₂Tb (R = Me, Ph; n = 1 (M = Hg), 2 (M = Tl), H₃Tb = 2-thiobarbituric acid) have been prepared, and studied by vibrational (IR and Raman) and NMR (¹H, ¹³C, ¹⁹⁹Hg and ²⁰⁵Tl) spectroscopy. The organomercury derivatives have the metal bound to the deprotonated thiol sulphur atom of the ligand in both the solid state and in DMSO solution. The organothallium compounds, however, while having the metal bound to the sulphur atom and possibly to one of the nitrogen atoms of the ligand pyrimidine ring in the solid state, in DMSO form conducting solutions containing H₂Tb⁻ and R₂Tl⁺ ions.     

Synthesis of mixed metal decaosmium carbido clusters: The X-ray structures of the monoanions [Os10C(CO)24Cu(NCMe)]− and [Os10C(CO)24AuPPh3]−

The high nuclearity mixed metal cluster monoanions [Os₁₀C(CO)₂₄Cu(NCMe)]^? (I) and [Os₁₀C(CO)₂₄AuPPh₃]^? (II) have been obtained by reaction of the carbido-dianion [Os₁₀C(CO)₂₄]^2? (III) with one equivalent of [Cu(NCMe)₄] [BF₄] and Ph₃PAuCl, respectively, in CH₂Cl₂. X-ray analysis of the [PPh₃Me]⁺ salts of I and II show that the Cu and Au ligands have added to capping tetrahedra of the dianion III in μ₃- and μ₂-bridging positions, respectively.     

A study of substituent effect on 1H and 13C nmr spectra of N‐ and C‐substituted carbazoles

¹H and ¹³C nmr spectra of several N‐ and C‐substituted carbazoles (Series 1, 2, 3 and 4) were measured. Correlations between chemical shifts and substituent constants show that these parameters describe properly the substituent effect on the nmr phenomena. Atomic charge densities for carbazoles of Series 1, 2, 3 and 4 were calculated by using the semi empirical PM3 method. These values also show a linear correlation with the ¹³C chemical shifts. The synthesis of several carbazole derivatives 1a – 1g, 2a – 2g, 3a – 3j and 4a – 4g have been carried out according to literature procedures. The carbazoles 3i, 3j and 4c have been synthesized and fully characterized for the first time.     

Vanadium Doped Sol-Gel TiO2 Coatings

A study of the experimental conditions required to obtain vanadium doped sol-gel TiO2 coatings is presented. Tetraethyl orthotitanate was employed as the TiO2 source and VCl3, VOSO4 · H2O and VOSO4 dissolved H2SO4 where employed as vanadium sources.Dip coating has been used to produce coatings on silicon wafers, spectral carbon electrodes and titanium electrodes. Both supported and unsupported films have been studied by UV-Vis spectra, IR spectroscopy and X-ray diffraction (XRD). The measurements have been made on samples as prepared and treated thermally at temperatures between 100°C and 300°C. The thermal treatment temperatures have been established from DTA/TGA measurements.The vanadium doped sol-gel TiO2 coatings have been tested as sensors for redox potential measurements in electrochemical processes. The influence of both the thickness of films and the nature of substrate has been investigated.     

How bridging ligands and neighbouring groups tune the gold-gold bond strength

Gold-gold interactions in small polynuclear complexes are analysed using extended Hückel calculations. They are influenced by the nature of the ligand donor atoms, by the bridging ligands, but most by the formal oxidation state of the metal. Au---Au bonds are much stronger in complexes of Au(II) and Au(III), but a weak interaction between two d¹⁰ centres exists for Au(I) complexes, owing to mixing of the s and p orbitals with the d orbitals. Phosphines induce stronger metal-metal bonds when coordinated trans to the Au---Au bond in [Au(II)[(CH₂)₂PPh₂]L]₂ (Ph = phenyl), but have the opposite effect when bonded orthogonally to the metal-metal axis in Au(I) binuclear species. When two gold atoms are bridged by a single carbon atom, belonging either to mesityl (Mes = 2,4,6-Me₃C₆H₂) or CR₂, the former produces stronger Au(I)---Au(I) interactions, reflected in shorter distances. Formal oxidation states are proposed for the gold atoms in two mixed-valence clusters, [Au4(C₆F₅)₂((PPh₃)_{2CH})2(PPh3)2](ClO4)2 and [{(2,4,6-C6F3H2)Au(CH2PPh2CH2)2Au{in2}-Au(CH₂PPh₂CH₂)₂Au](ClO₄)₂. The results suggest a higher oxidation state for the outer gold atoms, in both the T-shaped tetranuclear cluster and the Au₆ linear chain.