Synthetic peptides in the diagnosis of HIV infection

Peptide-based enzyme-linked immunosorbent assays have been found to be enough sensitive and specific for the diagnosis of human immunodeficiency virus specific antibodies in acquired immunodeficiency syndrome patients. This review provides an overview of the most important peptides developed for use as synthetic antigens in immunodiagnosis of HIV-infected patients. In particular, many studies have been devoted to discriminate between the two retroviruses HIV-1 and HIV-2, as well as different subtypes.     

Labeling of organic biomolecules with ethynylferrocene

The Sonogashira coupling reaction of ethynylferrocene with adenine, uracil, tyrosine and steroid derivatives was studied; with the exception of tyrosine it was proved to be a good route for the attachment of ferrocene to these representative biomolecules. In addition the transformation of alkynyl uracil to furanopyrimidone derivatives was investigated and the formation of the furanopyrimidone ring was confirmed by an X-ray crystallographic analysis carried out on product 16.     

NMR and theoretical investigations on the structures and dynamics of octahedral bis(chelate)dichloro V(III) compounds isolated by an unusual reduction of non-oxo V(IV) species

Reaction of the non-oxo V(IV) species [V(IV)Cl(2)(L(OO))(2)] [L(OO) = acetylacetonate (acac(-)) or benzoylacetonate (bzac(-))] with a chelate nitrogen-donor ligand L(NN) in acetonitrile leads to the reduction of V(IV) to V(III) and the formation of the mononuclear V(III) compounds of the general formula [V(III)Cl(2)(L(OO))(L(NN))] (L(OO) and L(NN) are acac(-) and bipy for 1; acac- and 5,5'-me(2)bipy for 2; acac(-) and 4,4'-tb(2)bipy for 3; acac(-) and phen for 4; bzac(-) and bipy for 5; bzac(-) and phen for 6). The reduction of the V(IV) complexes was monitored by GC-MS and (1)H NMR spectroscopy. Both one- and two-dimensional (2D COSY and 2D EXSY) (1)H NMR techniques were used to assign the observed (1)H NMR resonances of 1-6 in CD(2)Cl(2) or CDCl(3) solution. It appeared that in solution these V(III) complexes form two isomers which are in equilibrium: cis-[V(III)Cl(2)(L(OO))(L(NN))] <==> trans-[V(III)Cl(2)(L(OO))(L(NN))]. 2D EXSY cross-peaks were clearly observed between bipy- and acac-hydrogen atoms of the two geometrical isomers of 1-3 as well as between bipy and acac(-) protons of the cis isomer, indicating a dynamic process that corresponds to cis-trans isomerization and a cis-cis racemization. The thermodynamic and kinetic parameters of the equilibrium between these two isomers were calculated for compounds 1 and 2 by using variable temperature (VT) NMR data. Both cis-trans isomerization and cis-cis racemization processes probably proceed with an intramolecular twist mechanism involving a trigonal prismatic transition state. Density functional calculations (DFT) also indicated such a rearrangement mechanism.     

Application of electrochemical reactors for industrial waste-water treatment

The effectiveness of electrochemical reactors for industrial wastewater treatment has been improved since three-dimensional electrodes have been introduced; in fact, limitations of mass transfer can arise, due to the low concentrations of pollutants which may be involved in the process. Three-dimensional electrodes offer a very high electrode area per unit electrode volume and they can act as turbulence promoters or give rise to high linear electrolyte velocity, resulting in high values of mass transport coefficient. However, careful selection of operative parameters is needed in order to obtain high performance. This paper examines the results obtained in our laboratory on the cathodic reduction of copper at RVC electrodes; in particular the interference of dissolved oxygen is studied during the removal of copper from extremely diluted solutions (C < 10 ppm). Some results are also discussed on the removal of organic pollutants by electrochemical oxidation at three-dimensional anode consisting of a fixed bed of carbon pellets.     

Experimental study of the pH influence on the transport mechanisms of phenols in soil

The study of the transport mechanisms connected to solid-liquid interactions is fundamental in the determination of the extension of the pollution of a site and in the evaluation of the best remediation process to be applied. The sorption of hydrophobic ionizable organic contaminants from the groundwaters is supervised not only by the physico-chemical properties of soil and pollutants, but also by the groundwaters pH, which deeply influences their solubility in the aqueous media, and consequently their transport mechanisms in the aquifer. In this work an experimental study of the sorption of phenol and 2-nitrophenol on two soils, different in particle-size distribution, CEC and organic carbon content, was realized. The sorption potential of the soils was evaluated by means of a physical, mineralogical and chemical characterization. The experimental data coming from some batch tests, performed at pH values equal to 4, 7 and 10 were fitted by means of linear, Freundlich and Langmuir isotherms models. The soil-contaminants interaction mechanisms that influence the isotherms shapes were then analyzed and discussed, and a comparison between the theoretical and experimental values of the partitioning coefficient KD was performed.     

Method development for the determination of iron in milligram amounts of rice plants (Oryza sativa L.) from cultivation experiments using graphite furnace atomic absorption spectrometry

The amount of sample that is available for analysis in laboratory plant cultivation experiments is usually very limited. Highly sensitive analytical techniques are therefore required, even for elements that are present in the plants at mg g^–1 concentrations, and graphite furnace atomic absorption spectrometry (GFAAS) was chosen in this work because of its micro-sampling capability, and its relatively simple operation. Four micro-methods were investigated for the determination of iron in roots and leaves of rice plants: i) a micro-digestion with nitric and hydrochloric acids, ii) a slurry procedure using tetramethylammonium hydroxide (TMAH) tissue solubilizer, iii) a slurry prepared in 1.4 mol L^–1 nitric acid, and treated in an ultrasonic bath, and iv) the direct analysis of solid samples. The micro-digestion was suffering from high blank values and contamination problems, so that it could not be recommended for routine purposes. The TMAH method exhibited poor precision and occasional low recoveries, particularly for real samples. Direct solid sampling analysis gave results similar to those obtained with the slurry technique with ultrasonic agitation for the determination of iron in certified reference materials with iron content up to about 100 g g^–1, but was too sensitive for the investigated rice plants, which had an iron content up to several mg g^–1. The slurry technique with ultrasonic treatment of the samples, suspended in dilute nitric acid, was finally adopted as the method of choice.The method was then applied for the determination of iron in the leaves and in different compartments of the roots of two rice cultivars, one sensitive to iron toxicity, an important nutritional disorder, and the other one resistant to iron toxicity. The results suggest that the higher resistance to iron toxicity of the second cultivar is due to a smaller uptake of iron from the soil, resulting in lower iron levels in all compartments of the plant.     

Covalently Bound Antibody on Polystyrene Latex Beads: Formation, Stability, and Use in Analyses of White Blood Cell Populations

CD4 or CD8 antibodies were covalently bound to latex beads by reaction of activated CD4 or CD8 monoclonal antibodies with 2-μm-diameter, 1,3-diaminopropane (DAP) coupled, polystyrene aldehyde/sulfate latex beads. Spectrophotometric analyses of the filtrates of the antibody-bead conjugation mixtures for unreacted antibody allowed construction of binding curves of antibody for the polystyrene bead surface and evaluation of binding constants for association of antibody with bead, ranging from 1.5x10(7) to 1.6x10(7) M(-1) for CD4 and CD8 antibodies. The reaction of the antibody thiol group with the activated maleimide group on the bead at pH 7.2-7.3 was complete within 10-15 min. The kinetics of CD4 or CD8 monoclonal antibody displacement from the surface of covalently conjugated antibody-polystyrene latex beads was followed as a function of temperature (5, 22, and 37 degrees C) and the nature of the final diluent for the antibody-coated beads by measuring the concentration of antibody in the filtrates of conjugated beads by an ELISA (enzyme-linked immunosorbent assay). The displacement reaction showed a pseudo-zero-order dependence of the rate, with constants, k(1), ranging from 0.65x10(-17) to 270x10(-17) M s(-1). The functionality of antibody-coated beads suspended in various media was also monitored in a biological cell assay with whole blood. The cell assay depends on forming a layer of beads around targeted lymphocytes to distinguish them from nontargeted lymphocytes by differences in dc or rf conductivity or median angle light scatter. Covalently bound CD4 and CD8 antibody beads stored in one set of media at 5, 22, and 37 degrees C over a period of 16 weeks showed excellent results in the STKS assay with various blood donors, which correlated well (correlation coefficients of 0.99 for CD4 data and 0.93 for CD8 data) with reference results obtained with fluorescent markers by flow cytometry. Covalently bound CD4/CD8 beads stored for 2 weeks in BSA buffer at 5-37 degrees C performed equally well in providing accurate values of the percentage of CD4- or CD8-positive cells in the total white blood cell population, whereas the same beads stored in the 47-50 degrees C range showed some failures in performance. Comparison with antibody concentrations in filtrates of adsorbed antibody-bead suspensions showed 2- to 10-fold greater amounts of free antibody at comparable elapsed time, media, and temperature conditions. A threshold of 1-2 μg/mL of free antibody was necessary before adverse effects on the biological cell assay were noticeable. Copyright 2001 Academic Press.     

A Fourier series formula for energy of measures with applications to Riesz products

In this paper we derive a formula relating the energy and the Fourier transform of a finite measure on the -dimensional torus which is similar to the well-known formula for measures on .

We apply the formula to obtain estimates on the Hausdorff dimension of Riesz product measures. These give improvements on the earlier, classical results which were based on completely different techniques.

     

A new characterisation of hereditary pi rings

In this paper we prove a new characterisation of hereditary PI rings, namely we show that a Noetherian, but not Artinian, PI ringR that is an order in an Artinian ring splits into a direct sum of an Artinian ring of finite representation type and hereditary semiprime rings if and only if all its proper Artinian factor rings are of finite representation type. We also show, through examples, that the above characterisation does not hold for some more general settings. Supported by the EC via TMR-Fellowship ERB4001GT63713.     

Intersection Local Times of Independent Brownian Motions as Generalized White Noise Functionals

A 'chaos expansion' of the intersection local time functional of two independent Brownian motions in R ^d is given. The expansion is in terms of normal products of white noise (corresponding to multiple Wiener integrals). As a consequence of the local structure of the normal products, the kernel functions in the expansion are explicitly given and exhibit clearly the dimension dependent singularities of the local time functional. Their L ^p -properties are discussed. An important tool for deriving the chaos expansion is a computation of the 'S-transform' of the corresponding regularized intersection local times and a control about their singular limit.