Effect of Tomato Peel Extract Grown under Drought Stress Condition in a Sarcopenia Model

Tomatoes and their derivates represent an important source of natural biologically active components. The present study aims to investigate the protective effect of tomato peel extracts, grown in normal (RED-Ctr) or in drought stress (RED-Ds) conditions, on an experimental model of sarcopenia. The phenolic profile and total polyphenols content (TPC) of RED-Ctr and RED-Ds were determined by Ultra High-Performance Liquid Chromatography (UHPLC) analyses coupled to electrospray ionization high-resolution mass spectrometry (ESI-HR-MS). Human skeletal muscle myoblasts (HSMM) were differentiated in myotubes, and sarcopenia was induced by dexamethasone (DEXA) treatment. Differentiation and sarcopenia were evaluated by both real-time PCR and immunofluorescent techniques. Data show that myosin heavy chain 2 (MYH2), troponin T (TNNT1), and miogenin (MYOG) were expressed in differentiated myotubes. 5 μg Gallic Acid Equivalent (GAE/mL) of TPC from RED-Ds extract significantly reduced muscle atrophy induced by DEXA. Moreover, Forkhead BoxO1 (FOXO1) expression, involved in cell atrophy, was significantly decreased by RED-Ds extract. The protective effect of tomato peel extracts depended on their qualitative polyphenolic composition, resulting effectively in the in vitro model of sarcopenia.     

Seasonal Variability of a Caryophyllane Chemotype Essential Oil of Eugenia patrisii Vahl Occurring in the Brazilian Amazon

Eugenia patrisii Vahl is a native and non-endemic myrtaceous species of the Brazilian Amazon. Due to few botanical and phytochemical reports of this species, the objective of the present work was to evaluate the seasonal variability of their leaf essential oils, performed by GC and GC-MS and chemometric analysis. The results indicated that the variation in oil yields (0.7 ± 0.1%) could be correlated with climatic conditions and rainy (R) and dry seasons (D). (E)-caryophyllene (R = 17.1% ± 16.0, D = 20.2% ± 17.7) and caryophyllene oxide (R = 30.1% ± 18.4, D = 14.1% ± 19.3) are the major constituents and did not display significant differences between the two seasons. However, statistically, a potential correlation between the main constituents of E. patrisii essential oil and the climatic parameters is possible. It was observed that the higher temperature and insolation rates and the lower humidity rate, which are characteristics of the dry season, lead to an increase in the (E)-caryophyllene contents, while lower temperature and insolation and higher humidity, which occur in the rainy season, lead to an increase in the caryophyllene oxide content. The knowledge of variations in the E. patrisii essential oil composition could help choose the best plant chemical profile for medicinal purposes.     

Current status of biodiesel development in Brazil

In recent years, the concept of producing biodiesel from renewable lipid sources has regained international attention. In Brazil, a national program was launched in 2002 to evaluate the technical, economic, and environmental competitiveness of biodiesel in relation to the commercially available diesel oil. Several research projects were initiated nationwide to investigate and/or optimize biodiesel production from renewable lipid sources and ethanol derived from sugarcane (ethyl esters). Once implemented, this program will not only decrease our dependence on petroleum derivatives but also create new market opportunities for agribusiness, opening new jobs in the countryside, improving the sustainability of our energy matrix, and helping the Brazilian government to support important actions against poverty. This article discusses the efforts to develop the Brazilian biodiesel program in the context of technical specifications as well as potential oilseed sources.     

Two new marine sediment standard reference materials (SRMs) for the determination of organic contaminants

Two new marine sediment standard reference materials (SRMs), SRM 1941b Organics in Marine Sediment and SRM 1944 New York/New Jersey Waterway Sediment, have been recently issued by the National Institute of Standards and Technology (NIST) for the determination of organic contaminants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyl (PCB) congeners, and chlorinated pesticides. Both sediment SRMs were analyzed using multiple analytical methods including gas chromatography/mass spectrometry (GC/MS) on columns with different selectivity, reversed-phase liquid chromatography with fluorescence detection (for PAHs only), and GC with electron capture detection (for PCBs and pesticides only). SRM 1941b has certified concentrations for 24 PAHs, 29 PCB congeners, and 7 pesticides, and SRM 1944 has certified concentrations for 24 PAHs, 29 PCB congeners, and 4 pesticides. Reference concentrations are also provided for an additional 58 (SRM 1941b) and 39 (SRM 1944) PAHs, PCB congeners, and pesticides. SRM 1944, which was collected from multiple sites within New York/New Jersey coastal waterways, has contaminant concentrations that are generally a factor of 10–20 greater than SRM 1941b, which was collected in the Baltimore (Maryland) harbor. These two SRMs represent the most extensively characterized marine sediment certified reference materials available for the determination of organic contaminants.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Investigation of anthropic effects connected with metal ions concentration, organic matter and grain size in Bormida river sediments

An investigation on the sediment composition and grain size was carried out along the Bormida river (Piedmont, Northern Italy). The samples were taken both in the riverbed and on its banks. Multivariate statistical exploratory methods permitted to identify possible sources of primary pollution. In particular, principal component analysis (PCA) showed that there are probably at least three anthropogenic main causes of pollution, one connected with Cr, Ni and Sn, the second with cadmium and the last one with mercury. Some correlations were found between heavy metal ion concentrations and organic matter and/or the sediment grain size. Differences between the samples collected in the riverbed and on the banks were identified and the relationships between the principal components and the distance of the samples from the riverbed and from the hot spot represented by the ACNA industrial site were also analyzed.     

Modulation of the lowest metal-to-ligand charge-transfer state in [Ru(bpy)2(N-N)]2+ systems by changing the N-N from hydrazone to azine: photophysical consequences

Two Ru(II) complexes, [Ru(bpy)2L](ClO4)2 (1) and [Ru(bpy)2L'](BF4)2 (2), where bpy is 2,2'-bipyridine, L is diacetyl dihydrazone, and L' 1:2 is the condensate of L and acetone, are synthesized. From X-ray crystal structures, both are found to contain distorted octahedral RuN(6)(2+) cores. NMR spectra show that the cations in 1 and 2 possess a C2 axis in solution. They display the expected metal-to-ligand charge transfer (1MLCT) band in the 400-500 nm region. Complex 1 is nonemissive at room temperature in solution as well as at 80 K. In contrast, complex 2 gives rise to an appreciable emission upon excitation at 440 nm. The room-temperature emission is centered at 730 nm (lambda(em)(max)) with a quantum yield (Phi(em)) of 0.002 and a lifetime (tau(em)) of 42 ns in an air-equilibrated methanol-ethanol solution. At 80 K, Phi(em) = 0.007 and tau(em) = 178 ns, with a lambda(em)(max) of 690 nm, which is close to the 0-0 transition, indicating an 3MLCT excited-state energy of 1.80 eV. The radiative rate constant (5 x 10(4) s(-1)) at room temperature and 80 K is almost temperature independent. From spectroelectrochemistry, it is found that bpy is easiest to reduce in 2 and that L is easiest in 1. The implications of this are that in 2 the lowest (3)MLCT state is localized on a bpy ligand and in 1 it is localized on L. Transient absorption results also support these assignments. As a consequence, even though 2 shows a fairly strong and long-lived emission from a Ru(II) --> bpy CT state, the Ru(II) --> L CT state in 1 shows no detectable emission even at 80 K.     

Synthesis and thermal characterization of copper and calcium mixed phosphates

A series of compounds with composition of Ca_1–xCu_xHPO₄, where x varied from 0.05 to 0.5 were synthesized by precipitation method. The compounds were characterized by elemental analysis, X-ray diffraction, infrared spectroscopy, scanning electron microscopy, and thermogravimetry. The chemical stabilities of solids were investigated at several pH. Elemental analysis of copper, calcium and phosphorus are in agreement with the proposed composition. The formation of lamellar phosphates was evidenced. The stability of the set of compounds was better for samples with high copper content.     

Effect of cyclodextrins on physico-chemical and release properties of Eudragit RS 100 microparticles containing glutathione

The objective of this work was to develop a novel microparticulate system based on the mucoadhesive polymer Eudragit-RS 100 and cyclodextrins (CDs), potentially useful for the oral administration of Glutathione (γ–glutamylcysteinylglycine, GSH). For this purpose, an oil-in-oil (O/O) emulsion-solvent evaporation method was used for the preparation of microparticles (MPs) containing GSH alone or together with one of the following CDs: α-, β-, γ-, methyl-β-(Me-β-), hydroxypropyl-β-(HP-β-) or sulfobutylether-β-cyclodextrin (SBE_7m-β-CD). MPs were obtained by emulsifying a mixture of Eudragit RS 100, GSH, CD and magnesium stearate in acetone or acetonitrile with a mixture of liquid paraffin and Span 80. Size, encapsulation efficiency, and drug release of the prepared MPs were evaluated. The results clearly indicated that all the examined properties were dependent on the water-miscible solvents and CD used. In particular, MPs prepared by using acetone or acetonitrile showed different size distributions with mean diameters in the ranges 82–350 and 15–22 μm, respectively. Moreover, encapsulation efficiency values were found to be high in all cases (71–99%) and was significantly affected by the CD type. The GSH release rates were evaluated employing dissolution media with different pH values (1.2, 6.8 and 7.4) and the following rank order was obtained for MPs prepared using acetone: MPs incorporating Me-β-CD > MPs without CD > MPs incorporating the remaining CDs. On the other hand, MPs prepared using acetonitrile gave the highest GSH release rate. Finally, stability of GSH encapsulated in MPs containing HP-β-CD to enzymatic attack by pepsin A, α-chymotrypsin, and γ-glutamyltranspeptidase was also investigated.