Enzymatic transformations. Immobilized A. niger epoxide hydrolase as a novel biocatalytic tool for repeated-batch hydrolytic kinetic resolution of epoxides

Studies aimed at immobilization of the Aspergillus niger epoxide hydrolase were performed. The use of conventional approaches, i.e. of commercially available supports and classical methodologies, only led to low stabilisation and unsatisfactory enzymatic activity recovery. Therefore, a new strategy based on the use of a "second generation" type of epoxy-activated supports allowing multi-point covalent immobilization, i.e. Eupergit C, partially modified with ethylene diamine (Eupergit C/EDA), and of an adequate experimental procedure was set up. This allowed us to prepare an immobilized biocatalyst with 70%, retention of the initial enzymatic activity and a stabilisation factor of about 30. Interestingly, this biocatalyst also led to a noticeable increase of the E value for the resolution of two test substrates, styrene oxide 1 and p-chlorostyrene oxide 2. This was improved from about 25 to 56 and from 40 to 100, respectively. A typical repeated batch experiment indicated that the thus immobilized enzyme could be re-used for over 12 cycles without any noticeable loss of enzymatic activity or change in enantioselectivity. This therefore opens the way for the use of an 'heterogeneous catalysis' methodology for achieving the preparation of various enantiopure epoxides via biocatalysed hydrolytic kinetic resolution.     

The effect of temperature on food emulsifiers at fluid-fluid interfaces

Heat-induced interfacial aggregation of a whey protein isolate (WPI) with a high content of beta-lactoglobulin (>92%), previously adsorbed at the oil-water interface, was studied by means of interfacial dynamic characteristics performed in an automatic drop tensiometer. Protein concentration in aqueous bulk phase ranging between 1x10(-1) and 1x10(-5) % wt/wt was studied as a variable. The experiments were carried out at temperatures ranging from 20-80 degrees C with different thermal regimes. During the heating period, competition exists between the effect of temperature on the film fluidity and the increase in mechanical properties associated with the interfacial gelation process. Interfacial crystallisation of food polar lipids (monopalmitin, monoolein, and monolaurin) previously adsorbed at the oil-water interface, was studied by interfacial dynamic characteristics (interfacial tension and surface dilational properties). The temperature, ranging between 40 and 2 degrees C, and the lipid concentration in aqueous oil phase, ranging between 1x10(-2) and 1x10(-4) % wt/wt, were studied as variables. Significant changes in interfacial dynamic characteristics associated with interfacial lipid crystallisation were observed as a function of lipid concentration in the bulk phase. Interfacial crystallisation of food polar lipids (monopalmitin, monoolein, and monolaurin) at the air-water interface, was studied by pi-A isotherms performed in a Langmuir trough coupled with Brewster angle microscopy (BAM). A condensation in monoglyceride monolayers towards lower molecular area was observed as the temperature decreased. This effect was attributed to lipid crystallisation at lower temperatures. BAM images corroborated the effect of temperature on the monolayer structure, as a function of the monoglyceride type.     

Identification of drying oils used in pictorial works of art by liquid chromatography of the 2-nitrophenylhydrazides derivatives of fatty acids

A new HPLC-UV-Vis method for identification of drying oils from binding media or protective film used in pictorial works of art prior to conservation or restoration is proposed. Chromophore derivatization of fatty acids released by hydrolysis of structural drying oils is studied. The derivatization reagent selected was 2-nitrophenylhydrazine with 1-ethyl-3-(3-dimethyl animopropyl)carbodiimide hydrochloride/pyridine as catalyst. This reaction was carried out using microwave heating. Mobile phase was methanol/water/n-propanol/acetic acid (80:14:5:1) running in isocratic mode. Absorbance was measured at 400 nm. In these conditions, hydrazides of myristic, palmitic, oleic, and stearic acids were satisfactorily resolved. Method shows good sensitivity, with a detection limit of 15 μmol l⁻¹, and good linearity between 0.03 and 3 mmol l⁻¹. Peak area ratios among fatty acids derivatives allows identification of the drying oils. The stearic/palmitic ratio is the most important, because it allows to differentiate among the different drying oils. The proposed method has been successfully applied to real samples from items of the cultural heritage of Valencia (Spain).     

High-pressure flow-injection assembly. Indirect determination of glycine by atomic absorption spectrometry

A procedure for the determination of glycine is described. The method is based on the reaction of the analyte with finely powdered, solid copper(II) carbonate in a continuous-flow assembly. The optimum experimental conditions of pH, temperature, sample volume, flow-rate, column length and internal diameter, and the linear range of calibration, were studied. Interference from foreign substances that accompany this amino acid in pharmaceutical formulations was studied, and the method was applied to the determination of glycine.     

An iterated local search algorithm for the single-vehicle cyclic inventory routing problem

The Single-Vehicle Cyclic Inventory Routing Problem (SV-CIRP) belongs to the class of Inventory Routing Problems (IRP) in which the supplier optimises both the distribution costs and the inventory costs at the customers. The goal of the SV-CIRP is to minimise both kinds of costs and to maximise the collected rewards, by selecting a subset of customers from a given set and determining the quantity to be delivered to each customer and the vehicle routes, while avoiding stockouts. A cyclic distribution plan should be developed for a single vehicle.     

Ergonomics as basis for a decision support system in the printing industry

Central European Journal of Operations Research - The newspapers must be printed each night in a very short time, in order to deliver them next morning. A printing plant must perfectly design the...     

Photoinitiated polymerization of methacrylic monomers in a polystyrene matrix: Kinetic,mechanistic, and structural aspects

The kinetics and mechanism of the photoinitiated polymerization of tetrafunctional and difunctional methacrylic monomers [1,6‐hexanediol dimethacrylate (HDDMA) and 2‐ethylhexyl methacrylate (EHMA)] in a polystyrene (PS) matrix were studied. The aggregation state, vitreous or rubbery, of the monomer/matrix system and the intermolecular strength of attraction in the monomer/matrix and growing macroradical/matrix systems are the principal factors influencing the kinetics and mechanism. For the PS/HDDMA system, where a relatively high intermolecular force of attraction between monomer and matrix and between growing macroradical and matrix occurs, a reaction‐diffusion mechanism takes place at low monomer concentrations (<30–40%) from the beginning of the polymerization. For the PS/EHMA system, which presents low intermolecular attraction between monomer and matrix and between growing macroradical and matrix, the reaction‐diffusion termination is not clear, and a combination of reaction‐diffusion and diffusion‐controlled mechanisms explains better the polymerization for monomer concentrations below 30–40%. For both systems, for which a change from a vitreous state to a rubbery state occurs when the monomer concentration changes from 10 to 20%, the intrinsic reactivity and k_p/k_t^1/2 ratio (where k_p is the propagation kinetic constant and k_t is the termination kinetic constant) increase as a result of a greater mobility of the monomer in the matrix (a greater k_p value). The PS matrix participates in the polymerization process through the formation of benzylic radical, which is bonded to some extent by radical–radical coupling with the growing methacrylic radica, producing grafting on the PS matrix. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2049–2057, 2001     

Synthesis and Modeling of Ezetimibe Analogues

Ezetimibe is a well-known drug that lowers blood cholesterol levels by reducing its absorption in the small intestine when joining to Niemann-Pick C1-like protein (NPC1L1). A ligand-based study on ezetimibe analogues is reported, together with one-hit synthesis, highlighted in the study. A convenient asymmetric synthesis of (2S,3S)-N-α-(R)-methylbenzyl-3-methoxycarbonylethyl-4-methoxyphenyl β-lactam is described starting from Baylis–Hillman adducts. The route involves a domino process: allylic acetate rearrangement, stereoselective Ireland–Claisen rearrangement and asymmetric Michael addition, which provides a δ-amino acid derivative with full stereochemical control. A subsequent inversion of ester and acid functionality paves the way to the lactam core after monodebenzylation and lactam formation. It also shows interesting results when it comes to a pharmacophore study based on ezetimibe as the main ligand in lowering blood cholesterol levels, revealing which substituents on the azetidine-2-one ring are more similar to the ezetimibe skeleton and will more likely bind to NPC1L1 than ezetimibe.     

Prediction of the chemiluminescent behaviour of phenols and polyphenols

A paper from this laboratory 'J. Anal. Chem. 73 (2001) 4301' was recently published and dealing with the first attempt to apply molecular connectivity calculations to predict a chemical property with analytical usefulness; namely, the chemiluminescent behaviour of substances when react with common strong oxidants in liquid phase. In the present work, the usefulness of molecular topology on the search for new chemiluminescent compounds is clearly demonstrated. The proposed discriminant equation, represented a success of 92.7% in the prediction. The present paper is the further step from the cited paper; it is dealing on the application of molecular connectivity calculations (former discriminant equation 'J. Anal. Chem. 73 (2001) 4301') to predict the chemiluminescent behaviour of phenols and polyphenols when they react with common oxidants in liquid phase. A number of phenols and polyphenols (close to 100) were theoretically studied by means of the discriminant equation 'J. Anal. Chem. 73 (2001) 4301', being some of them predicted as chemiluminescent with a high probability. These theoretical predictions have been empirically checked through a continuous flow manifold. A number of 33 compounds, selected between those which chemiluminescent behaviour was predicted, were assayed. A success of 100% over the theoretical predictions was obtained.