Characterization of posticlure and the structure-related sex pheromone candidates prepared by epoxidation of (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes

trans-11,12-Epoxy-(6Z,9Z)-6,9-henicosadiene (posticlure) has been identified from a pheromone gland of the lymantriid species, Orgyia postica. Since the diversity of Lepidoptera suggests that some species utilize the structure-related epoxy compound as a sex pheromone component, epoxydienes and epoxytrienes derived from (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes with a C₁₉–C₂₁ chain were systematically synthesized and the chemical data were accumulated in order to contribute to a new pheromone research. Peracid oxidation of each triene and each tetraene produced, respectively, a mixture of three epoxydienes (cis-6,7-epoxy-9,11-diene; cis-9,10-epoxy-6,11-diene; and trans-11,12-epoxy-6,9-diene) and four epoxytrienes (cis-3,4-epoxy-6,9,11-triene; cis-6,7-epoxy-3,9,11-triene; cis-9,10-epoxy-3,6,11-triene; and trans-11,12-epoxy-3,6,9-triene). While the 9,10-epoxy compounds were unstable and, interestingly, converted into 9-ketone derivatives after chromatography over SiO₂, each positional isomer was isolated by HPLC equipped with an ODS column, and the chemical structure was determined by NMR analysis. On the GC-MS analysis with a DB-23 column, the positional isomers were also eluted separately and characteristic mass spectra were proposed. By comparing the spectral data of the epoxy compounds with a different carbon chain, diagnostic fragment ions reflecting the chemical structure were determined as follows: m/z 79, 109, 113, and M-114 for the 6,7-epoxydienes; m/z 69, 97, 111, 139, and M-111 for the 9,10-epoxydienes; m/z 57, 79, 109, 136, M-151, and M-111 for the 11,12-epoxydienes; m/z 79, 91, 105, and 119 for the 3,4-epoxytrienes; m/z 79, 124, M-124, M-96, and M-69 for the 6,7-epoxytrienes; m/z 79, 95, 109, 137, and M-108 for the 9,10-epoxytrienes; and m/z 79, 134, M-149, M-109, and M-95 for the 11,12-epoxytrienes.     

Selective detection of polyaromatic hydrocarbons on diesel exhaust particles using sputtered neutral mass spectrometry

Aiming for the highly sensitive analysis of aromatic hydrocarbons in organic mixtures, selective ionization using an ultraviolet laser ionization technique was examined for the determination of sputtered neutral species on organic surfaces. The mass spectrum of a model mixture containing pyrene and n‐alkane showed that only pyrene was ionized and detected, whereas a mass spectrum without laser irradiation, i.e. in the case of secondary ion mass spectrometry, was dominated by many n‐alkane fragment peaks. This technique was applied for the detection of polyaromatic hydrocarbons adsorbed on diesel exhaust particles. Two kinds of polyaromatic hydrocarbons were clearly detected because many aliphatic fragment signals were suppressed by means of ultraviolet laser ionization. Copyright © 2013 John Wiley & Sons, Ltd.     

CZE study on adsorption processes of aliphatic and aromatic amines on PMMA chip

Adsorption processes on a PMMA chip linked with CZE separations of a group of 13 aliphatic and aromatic mono‐ and di‐amines were studied. Due to the lack of chromophores within aliphatic amines, contact conductivity detection implemented directly onto the chip was used for monitoring of cationic CZE separations. To prevent an adsorption of studied amines to the chip channels, the surface of PMMA chip was modified by dynamic coating. Different surface modifiers, such as aliphatic oligoamines (diethylenetriamine and triethylenetetramine), were added to the BGE solutions filling the chip channels. The effect of various concentrations of surface modifiers on peak profiles and separation parameters of amines was monitored. Of these, mainly, aliphatic di‐amines and aromatic mono‐amines adversely affected the CZE resolution of a whole group of analytes by their strong adsorption to the chip channels. A propionate BGE with pH 3.2 containing 100 μM triethylenetetramine and 25 mM 18‐crown‐6‐ether was found suitable for CZE resolution of 12 from a total of 13 amines studied. Simple dynamic modification of the surface of PMMA chip enabled fast (analysis time lasted 9 min), sensitive (sub‐μM LODs reached) and reproducible (1–3% RSD of the peak areas) CZE analysis of the aliphatic and aromatic amines.     

Synthesis and application of head-to-head-type styrene dimers bearing two fluoroalkyl end-groups

Head-to-head-type styrene and substituted styrene dimers bearing two fluoroalkyl end-groups have been efficiently synthesized by a simple reaction of perfluoroalkyl iodide with styrene under radical conditions as a mixture of meso and racemic forms. The meso form obtained from the mixture by recrystallization gave a crystal suitable for X-ray diffraction study and the crystal structure was found to be based on π-stacking of benzene rings and aggregation of fluoroalkyl chains. Dynamic light scattering measurements showed that meso-styrene dimers bearing two fluoroalkyl end-groups can form the nanometer size-controlled self-assemblies through the intermolecular π-stacking of benzene rings and aggregation of end-capped fluoroalkyl groups in methanol.

Photocycloaddition reaction of methyl 2- and 3-chromonecarboxylates with various alkenes

The irradiation of methyl 2- and 3-chromonecarboxylate in the presence of various alkenes afforded cyclobutane type adducts, whose structures were established by X-ray structural analysis. Methyl 2-chromonecarboxylate showed higher photochemical reactivity than methyl 3-chromonecarboxylate, in which endo adducts were yielded as major products.     

Cytotoxicity of Amino-BODIPY Modulated via Conjugation with 2-Phenyl-3-Hydroxy-4(1H)-Quinolinones

The combination of cytotoxic amino-BODIPY dye and 2-phenyl-3-hydroxy-4(1H)-quinolinone (3-HQ) derivatives into one molecule gave rise to selective activity against lymphoblastic or myeloid leukemia and the simultaneous disappearance of the cytotoxicity against normal cells. Both species′ conjugation can be realized via a disulfide linker cleavable in the presence of glutathione characteristic for cancer cells. The cleavage liberating the free amino-BODIPY dye and 3-HQ derivative can be monitored by ratiometric fluorescence or by the OFF-ON effect of the amino-BODIPY dye. A similar cytotoxic activity is observed when the amino-BODIPY dye and 3-HQ derivative are connected through a non-cleavable maleimide linker. The work reports the synthesis of several conjugates, the study of their cleavage inside cells, and cytotoxic screening.     

Fast Li-Ion Conduction in Spinel-Structured Solids

Spinel-structured solids were studied to understand if fast Li⁺ ion conduction can be achieved with Li occupying multiple crystallographic sites of the structure to form a “Li-stuffed” spinel, and if the concept is applicable to prepare a high mixed electronic-ionic conductive, electrochemically active solid solution of the Li⁺ stuffed spinel with spinel-structured Li-ion battery electrodes. This could enable a single-phase fully solid electrode eliminating multi-phase interface incompatibility and impedance commonly observed in multi-phase solid electrolyte–cathode composites. Materials of composition Li_1.25M(III)_0.25TiO₄, M(III) = Cr or Al were prepared through solid-state methods. The room-temperature bulk Li⁺-ion conductivity is 1.63 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄. Addition of Li₃BO₃ (LBO) increases ionic and electronic conductivity reaching a bulk Li⁺ ion conductivity averaging 6.8 × 10⁻⁴ S cm⁻¹, a total Li-ion conductivity averaging 4.2 × 10⁻⁴ S cm⁻¹, and electronic conductivity averaging 3.8 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄ with 1 wt. % LBO. An electrochemically active solid solution of Li_1.25Cr_0.25Mn_1.5O₄ and LiNi_0.5Mn_1.5O₄ was prepared. This work proves that Li-stuffed spinels can achieve fast Li-ion conduction and that the concept is potentially useful to enable a single-phase fully solid electrode without interphase impedance.