Tunable subnanosecond laser pulse generation using an active mirror concept

We report (theory, experimental check) an improved approach for generation of a tunable, subnanosecond pulse (0.1–0.4 ns), based on a single pulsation (“spike”) separation from the transient oscillations in a dye laser with active mirror (AMIR). A pumping by 20–50 ns pulses from Q-switched Nd:YAG laser is considered. The separation is in original, two-spectral selective channels cavity, where the forced by AMIR quenched generation at one of the wavelength stops initially started spiking generation at the other wavelength after the first spike development. The AMIR quickly starts the quenching generation at a precisely controlled moment and with necessary intensity thus assuring the desired separation. An advantage is a high reproducibility of the separation for high (~250%) pump power fluctuations combined with tuning in large range (~20 nm). To obtain such an operation we form ~1 ns leading front pump pulse by electrooptical temporal cutting of the input pump pulse and use an optical delay line. This increases also a few times the power in the separated spike (to be ~100 kW). Our approach widens the combinations of lasers for effective applications of spike separation technique (dye lasers excited by Q-switched solid-state or Cu-vapor lasers).     

A straightforward synthesis and structure of unprecedented iminium salts of dihydropyrido[3,2-e][1,3]thiazines

Unprecedented 2-iminium chloride salts of 5,8-dihydro-2H-pyrido[3,2-e][1,3]thiazines derivatives (8) were easily synthesized in one step from the corresponding o-chloroformyl-1,4-dihydropyridine (2) and thiourea. The structural study has been carried out by X-ray crystallography and theoretical calculations at the B3LYP/6-31G* levels and reveal that the new salts exhibit appropriate structural features to behave as calcium channel modulators.     

Polydiacetylene-supported silica films formed at the air/water interface

Mesostructured silica films have attracted interest as potential platforms for sensing, molecular sieving, catalysis, and others. The fabrication of free-standing silica films on water, however, is challenging due to the need for scaffolding agents that would constitute effective templates. We describe the assembly of thin film at the air/water interface comprising quaternary silicates and polydiacetylene (PDA), a unique chromatic polymer forming two-dimensional conjugated networks, and the use of these films for biological sensing. PDA exhibits a dual role in the system-both as the amphiphilic matrix facilitating immobilization of the silicate colloidal units at the air/water interface and additionally a chromatic reporter that undergoes visible blue-red transitions, accompanied by fluorescence transformations, in the presence of analytes. We demonstrate the application of the silicate/PDA thin films for the detection of bacterial proliferation.     

Quantitative plasma determination of a novel antiretroviral derivative of zidovudine by solid-phase extraction and high-performance liquid chromatography

A solid-phase extraction methodology, followed by high-performance liquid chromatography (HPLC) quantification with UV absorbance detection (λ=267 nm), was developed in order to study the stability of 3′-azido-3′-deoxy-5′-O-isonicotinoylthymidine (AZT-Iso), a novel derivative of the antiretroviral AZT, in different matrixes. The half-lives (t _1/2) for AZT-Iso were 1.19, 1.13 and 0.30 h for human, rat and rabbit plasma, respectively, and 14.91 and 25.49 h for potassium phosphate buffer (pH 7.4) and human serum albumin solution, respectively. The HPLC method proved to be selective, sensitive and accurate. Good recovery, linearity and precision were achieved using p-fluorophenol as an internal standard. The validity of this method was tested using synthetic mixtures of the intact drug with its decomposition products. In conclusion, the method presented is applicable to in vivo pharmacokinetics studies of AZT-Iso in rats.     

Flow analysis-vapor phase generation-Fourier transform infrared (FA-VPG-FTIR) spectrometric determination of nitrite

In this work, the coupling between flow analysis (FA)–vapor phase generation (VPG) and Fourier transform infrared spectrometry (FTIR) has been proposed as a novel and alternative strategy for the determination of nitrite. The analyte was transformed into the gaseous nitric oxide (NO) by on-line reaction with potassium iodide (KI) or ascorbic acid in acidic medium. The gaseous NO generated was transported by means of a N₂ gas carrier stream inside the IR gas cell and the corresponding FTIR spectrum was acquired in a continuous mode. The absorbance at 1876 cm⁻¹, corrected by a baseline established between 1879 and 1872 cm⁻¹ at a nominal resolution of 2 cm⁻¹, was selected as a measurement criterion. The effect of different spectroscopic and flow analysis experimental parameters, such as nominal resolution, number of scans, reducing agent and its concentration, acidic medium, reagents and sample flow rates, and the carrier gas flow rate on the analytical signal, and then in the figures of merit were initially evaluated by using a standard short path length (10 cm) IR gas cell. The optimization of the system was carried out by the univariate method. The main aims of this study were: (i) to investigate the on-line generation of gaseous nitric oxide in a continuous flow system, and (ii) the use of Fourier transform infrared spectrometry as an alternative and selective detector for the determination of nitrite. The proposed method was initially tested and applied for the determination of nitrite in samples with very high concentration of nitrite, such as frankfurters.     

Coordination de la phosphine organo-fer [CpFeIIC6Me5CH2PPh2]+ au RhI et proprietes spectroscopiques,electrochimiques et catalytiques des complexes heterobinucleaires FeII-RhI

The reactions between the phosphine-organoiron [CpFe^II-η⁶-C₆Me₅CH₂PPh₂]⁺ PF₆^? (1) and [RhCl(η⁴-diolefin)(μ-Cl)]₂ in CH₂Cl₂ at reflux give the new heterobinuclear air-stable crystalline complexes [CpFe^II-η⁶-C₆Me₅CH₂)P(Ph)₂Rh(η⁴-diene)Cl]PF₆,(D'*-diene=cyclooctadiene (COD): 65%, 2; trimethylfluorobenzobicyclo[2.2.2]octadiene (Me₃TFB): 48%, 3). Complexes 2 and 3 have been studied by ¹H, ¹³C and ³¹P NMR spectroscopy and they are carbonylated (CO, 1 atm). Cyclic voltammetry experiments with addition of MeOH show electron transfer Fe^IRh^I → Fe^IIRh⁰, the presence of a catalytic wave Fe^I/Fe^II and the possible formation of Rh hydrides. Under normal conditions 2 is a catalyst for hydrogenation of cyclohexene, but it is less efficient than the known mononuclear Rh¹ analogues.     

Highly enantioselective borane reduction of heteroaryl and heterocyclic ketoxime ethers catalyzed by novel spiroborate ester derived from diphenylvalinol: application to the synthesis of nicotine analogues

An asymmetric synthesis for the preparation of nonracemic amines bearing heterocyclic and heteroaromatic rings is described. A variety of important enantiopure thionyl and arylalkyl primary amines were afforded by the borane-mediated enantioselective reduction of O-benzyl ketoximes using 10% of catalyst 10 derived from ( S)-diphenylvalinol and ethylene glycol with excellent enantioselectivity, in up to 99% ee. The optimal condition for the first asymmetric reduction of 3- and 4-pyridyl-derived O-benzyl ketoxime ethers was achieved using 30% of catalytic loading in dioxane at 10 degrees C. ( S)- N-ethylnornicotine ( 3) was also successfully synthesized from the TIPS-protected ( S)-2-amino-2-pyridylethanol in 97% ee.     

A new selective fluorogenic probe for trivalent cations

A new selective chromo-fluorogenic probe for Fe(3+), Cr(3+) and Al(3+) is reported. Detection limits are in the μM range and the fluorogenic sensing ability could be observed by the naked eye when illuminated with UV-light. No response is observed with divalent cations.