Bifunctional monodisperse microspheres of copolymers of methyl methacrylate and N-vinylformamide

Emulsion copolymerization of methyl methacrylate and N-vinylformamide in the presence of azo initiators and dextran as a polymeric stabilizer was analyzed with the aim to prepare monodisperse polymer microspheres with a polyfunctional surface. Hydrolysis of comonomer units and cationic groups of the initiator residues in the surface layer of the particles to give amphoteric surfaces containing carboxy and amino groups was studied. The optimal conditions of formation of monodisperse microspheres with diameter varied in the 340–660 nm range and the conditions of their hydrolysis, which allow direct control of the amount and nature of functional groups on their surface, were found.     

The mechanism of interlayer exchange coupling in iron-chromium type nanostructures

A mechanism of the interlayer exchange coupling in layered structures of the Fe/Cr(001) type with rough interfaces is proposed. The theory is based on a model of the charge-induced spin density wave (SDW) formed in the chromium layer. It is shown that the effective magnetic coupling between thick ferromagnetic layers arises due to variations of the SDW vector orientation in the antiferromagnetic layer over a characteristic length ζ determined by the exchange stiffness of chromium. A general expression for the effective magnetic coupling energy E(ψ) as a function of the angle ψ between magnetic moments of the ferromagnetic layers is obtained and numerically analyzed for an arbitrary value of the parameter ρζ, where ρ is the density of monoatomic steps on the interface. For ρζ?1, the form of E(ψ) is typical of a model with the “ biquadratic” interaction, while in the case of ρζ?1, the dependence obtained differs significantly. The proposed mechanism is used to interpret the results of measurements of the interlayer exchange coupling in Fe/Cr(001) structures.     

Method development for the analysis of N-nitrosodimethylamine and other N-nitrosamines in drinking water at low nanogram/liter concentrations using solid-phase extraction and gas chromatography with chemical ionization tandem mass spectrometry

N-nitrosodimethylamine (NDMA) is a probable human carcinogen of concern that has been identified as a drinking water contaminant. U.S. Environmental Protection Agency Method 521 has been developed for the analysis of NDMA and 6 additional N-nitrosamines in drinking water at low ng/L concentrations. The method uses solid-phase extraction with coconut charcoal as the sorbent and dichloromethane as the eluent to concentrate 0.50 L water samples to 1 mL. The extracts are analyzed by gas chromatography-chemical ionization tandem mass spectrometry using large-volume injection. Method performance was evaluated in 2 laboratories. Typical analyte recoveries of 87-104% were demonstrated for fortified reagent water samples, and recoveries of 77-106% were demonstrated for fortified drinking water samples. All relative standard deviations on replicate analyses were < 11%.     

Non-affine structural evolution of soft colloidal crystalline latex films under stretching as observed via synchrotron X-ray scattering

A polymer dispersion consisting of soft latex spheres with a diameter of 135 nm was used to produce a crystalline film with face-centered cubic (fcc) packing of the spheres. Different from conventional small-molecule and hard-sphere colloidal crystals, the crystalline latex film in the present case is soft (i.e., easily deformable). The structural evolution of this soft colloidal latex film under stretching was investigated by in-situ synchrotron ultra-small-angle X-ray scattering. The film exhibits polycrystalline scattering behavior corresponding to fcc structure. Stretching results not only in a large deformation of the crystallographic structure but also in considerable nonaffine deformation at high draw ratios. The unexpected nonaffine deformation was attributed to slippage between rows of particles and crystalline grain boundaries. The crystalline structure remains intact even at high deformation, suggesting that directional anisotropic colloidal crystallites can be easily produced.     

Development of EPA method 535 for the determination of chloroacetanilide and other acetamide herbicide degradates in drinking water by solid-phase extraction and liquid chromatography/tandem mass spectrometry

U.S. Environmental Protection Agency (EPA) Method 535 has been developed in order to provide a method for the analysis of "Alachlor ESA and other acetanilide degradation products," which are listed on EPA's 1998 Drinking Water Contaminant Candidate List. Method 535 uses solid-phase extraction with a nonporous graphitized carbon sorbent to extract the ethane sulfonic acid (ESA) and oxanilic acid degradates of propachlor, flufenacet, dimethenamid, alachlor, acetochlor, and metolachlor from finished drinking water matrixes. Separation and quantitation of the target analytes are achieved with liquid chromatography/tandem mass spectrometry. Dimethachlor ESA and butachlor ESA were chosen during the method development as the surrogate and internal standard. Drinking water samples were dechlorinated with ammonium chloride without adversely affecting the analyte recoveries. Typical mean recoveries of 92-116% in deionized water and 89-116% in ground water were observed with relative standard deviations of <5%.     

Complex Formation of Phosphoryl- and Thiophosphorylacylacetonitriles with Different Cations

The enols R 1 R 2 P(E)(CN)C = CR 3 OH (E = O or S) gave in solutions either neutral metal complexes ML x or M(OH) y L x . The anionic ambidentate ligands are coordinated through E and O atoms in solutions, and O, E, and N atoms in in crystals.     

Tapered copolymers of styrene and 4-vinylbenzocyclobutene via carbanionic polymerization for crosslinkable polymer films

Well-defined polystyrene homopolymers with surface-adhesive triethoxysilyl end group were synthesized via living carbanionic polymerization, epoxide end-functionalization and subsequent hydrosilylation with triethoxysilane. Grafting-to performance of polymers with various molecular weight (M_n = 3000–14,000 g mol⁻¹) to a silicon surface was examined in dependence of reaction time, polymer concentration, solvent and number of alkoxysilyl end groups. Crosslinkable polymers for surface modification were synthesized by statistical carbanionic copolymerization of 4-vinylbenzocyclobutene (4-VBCB) and styrene, followed by epoxide end-functionalization and triethoxysilane modification (M_n = 4000–14,000 g mol⁻¹). The copolymers were characterized by ¹H-NMR, THF-SEC, and matrix-assisted laser desorption and ionization time-of-flight mass spectrometry. In situ ¹H-NMR kinetic studies in cyclohexane-d₁₂ provided information regarding the monomer gradient in the polymer chains, with styrene being the more reactive monomer (r_s = 2.75, r_4-VBCB = 0.23). Thin polymer films on silicon wafers were prepared by grafting-to surface modification under conditions derived for the polystyrene homopolymer. The traceless, thermally induced crosslinking reaction of the benzocyclobutene units was studied by DSC in bulk as well as in 3–6 nm thick polymer films. Crosslinked films were analyzed by atomic force microscopy, ellipsometry, and nanoindentation, showing smooth polymer films with an increased modulus. © 2019 The Authors. Journal of Polymer Science published by Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 181–192     

DEFORMATION OF SOFT COLLOIDAL CRYSTALLINE STRUCTURE-THEORETICAL CONSIDERATIONS AND EXPERIMENTAL EVIDENCES BY SYNCHROTRON SMALL-ANGLE X-RAY SCATTERING ON TENSILE STRETCHED POLYMERIC LATEX FILM

Films obtained via drying a polymeric latex dispersion are normally colloidal crystalline where latex particles are packed into a face centered cubic (fcc) structure.Different from conventional atomic crystallites or hard sphere colloidal crystallites,the crystalline structure of these films is normally deformable due to the low glass transition temperature of the latex particles.Upon tensile deformation,depending on the drawing direction with respect to the normal of specific crystallographic plane,one ...     

A new phenanthrene-based bis-oxime chemosensor for Fe(III) and Cr(III) discrimination

The synthesis of two new 2,7-disubstituted phenanthrene-based bis oximes is described. The ability of these two compound for complexing heavy metal cations have been studied and complexation constants and complex stoichiometry for Cr³⁺ and Fe³⁺ complex have been determined. The fluorescent properties of ligand 2 make this compound able to act as a sensor able to discriminate between Cr³⁺ and Fe³⁺. Detection limits for these two cations have been evaluated.     

Synthesis, structure, and reactivity of mononuclear RE(I) oximato complexes

Complexes [Re(ONCMe2)(CO)3(bipy)] (1) and [Re(ONCMe2)(CO)3(phen)] (2), synthesized by reaction of the respective triflato precursors [Re(OTf)(CO)3(N-N)] (N-N = bipy, phen) with KONCMe2, feature O-bonded monodentate oximato ligands. Compound [Re(CO)3(phen)(HONCMe2)]BAr'4 (3), with a monodentate N-bonded oxime ligand, was prepared by reaction of [Re(OTf)(CO)3(phen)], HONCMe2, and NaBAr'4. Deprotonation of 3 afforded 2. The oximato complexes reacted with p-tolylisocyanate, p-tolylisothiocyanate, maleic anhydride, and tetracyanoethylene, affording the products of the insertion of the electrophile into the Re-O bond, compounds 4-7. One representative of each type of compound was fully characterized, including single-crystal X-ray diffraction. The reactions of 1 and 2 with dimethylacetylenedicarboxylate were found to involve first an insertion as the ones mentioned above but followed by incorporation of water, loss of acetone, and formation of the charge-separated neutral amido complexes 9 and 10. The structure of 9 and 10 was determined by X-ray diffraction, and key features of their electronic distribution were studied using a topological analysis of the electron density as obtained from the Fourier map.