Low-temperature enzymatic hydrolysis resolution in mini-emulsion media

A low-temperature mini-emulsion medium for the enzymatic resolution of 1-phenylethanol is described for the first time. The enzymatic hydrolysis resolution of 1-phenylethyl esters with different chain-lengths in the presence of Candida antarctica lipase B in mini-emulsion media was shown to be significantly controlled by temperature. In this system, the direct effect of temperature on the mini-emulsion size was observed. For the longer 1-phenylethyl ester, 1-phenylethyl dodecanoate, the enzymatic resolution was promoted exclusively at low temperatures. The preparative mini-emulsion enzymatic reaction of 1-phenylethyl dodecanoate at 4 °C afforded the isolation of (R)-phenylethanol with a yield of 36 % with an ee of 99 %. (S)-Phenylethanol was isolated with a 51 % yield with an ee of 79 %.     

Biosynthesis‐Assisted Structural Elucidation of the Bartolosides,Chlorinated Aromatic Glycolipids from Cyanobacteria

The isolation of the bartolosides, unprecedented cyanobacterial glycolipids featuring aliphatic chains with chlorine substituents and C‐glycosyl moieties, is reported. Their chlorinated dialkylresorcinol (DAR) core presented a major structural‐elucidation challenge. To overcome this, we discovered the bartoloside (brt) biosynthetic gene cluster and linked it to the natural products through in vitro characterization of the DAR‐forming ketosynthase and aromatase. Bioinformatic analysis also revealed a novel potential halogenase. Knowledge of the bartoloside biosynthesis constrained the DAR core structure by defining key pathway intermediates, ultimately allowing us to determine the full structures of the bartolosides. This work illustrates the power of genomics to enable the use of biosynthetic information for structure elucidation.     

A hybrid neural model of ethanol production by Zymomonas mobilis

A hybrid neural model was developed for the alcoholic fermentation by Zymomonas mobilis. This model is composed by the mass-balance equations of the process and neural networks, which describe the kinetic rates. Strategies that combines scarce experimental data with approximate models of the process were used to generate new data for the training of the networks, minimizing the number of experiments required. The proposed hybrid neural methodology uses all the information avail able about the process to deal with the difficulties in the development of the model.     

Development of a planar multibody model of the human knee joint

The aim of this work is to develop a dynamic model for the biological human knee joint. The model is formulated in the framework of multibody systems methodologies, as a system of two bodies, the femur and the tibia. For the purpose of describing the formulation, the relative motion of the tibia with respect to the femur is considered. Due to their higher stiffness compared to that of the articular cartilages, the femur and tibia are considered as rigid bodies. The femur and tibia cartilages are considered to be deformable structures with specific material characteristics. The rotation and gliding motions of the tibia relative to the femur cannot be modeled with any conventional kinematic joint, but rather in terms of the action of the knee ligaments and potential contact between the bones. Based on medical imaging techniques, the femur and tibia profiles in the sagittal plane are extracted and used to define the interface geometric conditions for contact. When a contact is detected, a continuous nonlinear contact force law is applied which calculates the contact forces developed at the interface as a function of the relative indentation between the two bodies. The four basic cruciate and collateral ligaments present in the knee are also taken into account in the proposed knee joint model, which are modeled as nonlinear elastic springs. The forces produced in the ligaments, together with the contact forces, are introduced into the system’s equations of motion as external forces. In addition, an external force is applied on the center of mass of the tibia, in order to actuate the system mimicking a normal gait motion. Finally, numerical results obtained from computational simulations are used to address the assumptions and procedures adopted in this study.     

Standard Enthalpies of Formation of 2,6-Di-tert-butyl4-methylphenol and 3,5-Di-tert-butylphenol and Their Phenoxy Radicals

The standard (p^o = 0.1 MPa) enthalpies of formation of 2,6-di-tert-butyl-4-methylphenol and 3,5-di-tert-butylphenol in the gaseous phase, –315.5 ± 4.4 kJ mol^–1 and –312.7 ± 4.6 kJ mol^–1, respectively, were derived from the standard enthalpies of combustion, in oxygen, at 298.15 K, measured by static bomb combustion calorimetry, and from the standard enthalpies of sublimation, at 298.15 K, measured by Calvet microcalorimetry. The O—H bond dissociation enthalpies in those compounds were determined in benzene by photoacoustic calorimetry, leading to the standard enthalpies of formation of the gaseous phenoxy radicals: –189 ± 8 kJ mol^–1 and –154 ± 6 kJ mol^–1, respectively. These results were used to calculate enthalpies of substituent redistribution reactions, which are proposed as a method to estimate new data for substituted phenols.     

Unravelling free volume in branched-cation ionic liquids based on silicon

The branching of ionic liquid cation sidechains utilizing silicon as the backbone was explored and it was found that this structural feature leads to fluids with remarkably low density and viscosity. The relatively low liquid densities suggest a large free volume in these liquids. Argon solubility was measured using a precise saturation method to probe the relative free volumes. Argon molar solubilities were slightly higher in ionic liquids with alkylsilane and siloxane groups within the cation, compared to carbon-based branched groups. The anion size, however, showed by far the dominant effect on argon solubility. Thermodynamic solvation parameters were derived from the solubility data and the argon solvation environment was modelled utilizing the polarizable CL&Pol force field. Semiquantitative analysis was in agreement with trends established from the experimental data. The results of this investigation demonstrate design principles for targeted ionic liquids when optimisation for the free volume is required, and demonstrate the utility of argon as a simple, noninteracting probe. As more ionic liquids find their way into industrial processes of scale, these findings are important for their utilisation in the capture of any gaseous solute, gas separation, or in processes involving the transformation of gases or small molecules.

The branching of ionic liquid cation sidechains utilizing silicon as the backbone was explored and it was found that this structural feature leads to fluids with remarkably low density and viscosity.     

Development of a Library of Thiophene-Based Drug-Like Lego Molecules: Evaluation of Their Anion Binding,Transport Properties,and Cytotoxicity

The anion-binding and transport properties of an extensive library of thiophene-based molecules are reported. Seventeen bis-urea positional isomers, with different binding conformations and lipophilicities, have been synthesized by appending α- or β-thiophene or α-, β-, or γ-benzo[b]thiophene moieties to an ortho-phenylenediamine central core, yielding six subsets of positional isomers. Through ¹H NMR, X-ray crystallography, molecular modelling, and anion efflux studies, it is demonstrated that the most active transporters adopt a pre-organized binding conformation capable of promoting the recognition of chloride, using urea and C−H binding groups in a cooperative fashion. Additional large unilamellar vesicle-based assays, carried out under electroneutral and electrogenic conditions, together with N-methyl-d -glucamine chloride assays, have indicated that anion efflux occurs mainly through an H⁺/Cl⁻ symport mechanism. On the other hand, the most efficient anion transporter displays cytotoxicity against tumor cell lines, while having no effects on a cystic fibrosis cell line.     

Synthesis of Imines via Reactions of Benzyl Alcohol with Amines Using Half‐Sandwich (η6‐p‐cymene) Ruthenium(II) Complexes Stabilised by 2‐aminofluorene Derivatives

A new class of half‐sandwich (η⁶‐p‐cymene) ruthenium(II) complexes supported by 2‐aminofluorene derivatives [Ru(η⁶‐p‐cymene)(Cl)(L)] ( L  = 2‐(((9H‐fluoren‐2‐yl)imino)methyl)phenol ( L ¹ ), 2‐(((9H‐fluoren‐2‐yl)imino)methyl)‐3‐methoxyphenol ( L ² ), 1‐(((9H‐fluoren‐2‐yl)imino)methyl)naphthalene‐2‐ol ( L ³ ) and N‐((1H‐pyrrol‐2‐yl)methylene)‐9H‐fluorene‐2‐amine ( L ⁴ )) were synthesized. All compounds were fully characterized by analytical and spectroscopic techniques (IR, UV–Vis, NMR) and also by mass spectrometry. The solid state molecular structures of the complexes [Ru(η⁶‐p‐cymene)(Cl)(L²)], [Ru(η⁶‐p‐cymene)(Cl)(L³)] and [Ru(η⁶‐p‐cymene)(Cl)(L⁴)] revealed that the 2‐aminofluorene and p‐cymene moieties coordinate to ruthenium(II) in a three‐legged piano‐stool geometry. The synthesized complexes were used as catalysts for the dehydrogenative coupling of benzyl alcohol with a range of amines (aliphatic, aromatic and heterocyclic). The reactions were carried out under thermal heating, ultrasound and microwave assistance, using solvent or solvent free conditions, and the catalytic performance was optimized regarding the solvent, the type of base, the catalyst loading and the temperature. Moderately high to very high isolated yields were obtained using [Ru(η⁶‐p‐cymene)(Cl)(L⁴)] at 1 mol%. In general, microwave irradiation produced better yields than the other two techniques irrespective of the nature of the substituents.     

Synthesis and Characterization of Surface-Active Ionic Liquids Used in the Disruption of Escherichia Coli Cells

Twelve surface-active ionic liquids (SAILs) and surface-active derivatives, based on imidazolium, ammonium, and phosphonium cations and containing one, or more, long alkyl chains in the cation and/or the anion, were synthetized and characterized. The aggregation behavior of these SAILs in water, as well as their adsorption at solution/air interface, were studied by assessing surface tension and conductivity. The CMC values obtained (0.03–6.0 mM) show a high propensity of these compounds to self-aggregate in aqueous media. Their thermal properties were also characterized, namely the melting point and decomposition temperature by using DSC and TGA, respectively. Furthermore, the toxicity of these SAILs was evaluated using the marine bacteria Aliivibrio fischeri (Gram-negative). According to the EC₅₀ values obtained (0.3–2.7 mg L⁻¹), the surface-active compounds tested should be considered “toxic” or “highly toxic”. Their ability to induce cell disruption of Escherichia coli cells (also Gram-negative), releasing the intracellular green fluorescent protein (GFP) produced, was investigated. The results clearly evidence the capability of these SAILs to act as cell disruption agents.