Über Spurenelementbestimmungen in Leberproben Mittels Protoneninduzierter Röntgenfluoreszenz (Pixe)

Multi-element-analysis by PIXE in respect to medical applications is discussed. Examples of trace-element determinations in liver tissues are given, demonstrating the applicability and usefulness of this rather new analytical technique.      

Effect of diffusion on rates and molecular weights in graft polymerization

A theoretical analysis has been made of the graft polymerization process in terms of the quantitative interrelationship between the initiation rate R_i, the k_p/k_t^1/ ratio of the monomer, the equilibrium solubility M of the monomer in the polymer, the polymer film thickness L, and the diffusivity D of the monomer in the polymer. It is shown how the values of these parameters in any grafting system interact to lead to diffusion-controlled graft polymerization. Whether graft polymerization is diffusion-free or diffusion-controlled depends on the values of K_p, d, k_p/k_p^1/2, and L as gathered in the parameter A = [(K_p/k_t^1/2)R_i, D,/^1/2] L/2. When the values of the various terms are such that A is less than 0.1 (i.e., D is large while R_i, k_p, and L are small), the reaction is diffusion-free. When A is greater than 3 (i.e., D is small while R_i, k_p, and L are large), the reaction is diffusion-controlled. The derived equations showing the relationship between kinetic and diffusional parameters are theoretically applicable to all grafting systems, i.e., for all monomer-polymer combinations under all conditions of reaction temperature, radiation intensity and polymer film thickness. The theoretical analysis has been verified for the rate and degree of polymerization for the radiation-induced graft polymerization of styrene to polyethylene.     

Formation and characterization of phospholipid monolayers spontaneously assembled at interfaces between aqueous phases and thermotropic liquid crystals

This paper reports an experimental investigation of the self-assembly of phospholipids (l-alpha-phosphatidylcholine-beta-oleoyl-gamma-palmitoyl (l-POPC), dipalmitoyl phosphatidylcholine (DPPC), and l-alpha-dilauroyl phosphatidylcholine (l-DLPC)) at interfaces between aqueous phases and the nematic liquid crystal (LC) 4'-pentyl-4-cyanobiphenyl. Stable planar interfaces between the aqueous phases and LCs were created by hosting the LCs within gold grids (square pores with widths of 283 microm and depths of 20 microm). At these interfaces, the presence and lateral organization of the phospholipids leads to interface-driven orientational transitions within the LC. By doping the phospholipids with a fluorescently labeled lipid (Texas Red-1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (TR-DPPE)), quantitative epifluorescence microscopy revealed the saturation coverage of phospholipid at the interface to be that of a monolayer with an areal density of approximately 49 +/- 8% relative to hydrated lipid bilayers. By adsorbing phospholipids to the aqueous-LC interface from either vesicles or mixed micelles of dodecyltrimethylammonium and phospholipid, control of the areal density of phospholipid from 42 +/- 10 to 102 +/-18% of saturation monolayer coverage was demonstrated. Fluorescence recovery after photobleaching (FRAP) experiments performed by using laser scanning confocal microscopy (LSCM) revealed the lateral mobility of fluorescently labeled DPPE in l-DLPC assembled at the interface with the liquid crystal to be (6 +/- 1) x 10(-12) m(2)/s for densely packed monolayers. Variation of the surface coverage and composition of phospholipid led to changes in lateral diffusivity between (0.2 +/- 0.1) x 10(-12) and (15 +/- 2) x 10(-12) m(2)/s. We also observed the phospholipid-laden interface to be compartmentalized by the gold grid, thus allowing for the creation of patterned arrays of phospholipids at the LC-aqueous interface.     

Light-induced coumarin cyclopentannelation

[reaction: see text] Whereas cyclopentenylcarbenes resulting from photocycloaddition of 4-alk-1-ynylcoumarins to 2,3-dimethylbut-2-ene undergo tandem cyclization to hitherto unknown tetracyclic (4-hetera)cyclopent[b,c]acenaphthylenes, the corresponding cyclopentenylnitrenes stemming from 4-cyanocoumarins and the same alkene are converted into tricyclic imines via H-abstraction.     

Aromatic vs aliphatic C-H cleavage of alkyl-substituted pyridines by (PNPiPr)Re compounds

Both (PNP)Re(H)(4) and (PNP)ReH(cyclooctyne) (PNP(i)(Pr) = ((i)Pr(2)PCH(2)SiMe(2))(2)N) react with alkylpyridines NC(5)H(4)R to give first (PNP)ReH(2)(eta(2)-pyridyl) and cyclooctene and then, when not sterically blocked, (PNP)Re(eta(2)-pyridyl)(2) and cyclooctane. The latter are shown by NMR, X-ray diffraction, and DFT calculations to have several energetically competitive isomeric structures and pyridyl N donation in preference to PNP amide pi-donation. DFT studies support NMR solution evidence that the most stable bis pyridyl structure is one that is doubly eta(2)- with the pyridyl N donating to the metal center. When both ortho positions carry methyl substituents, cyclooctane and the carbyne complex (PNP)ReH(tbd1;C-pyridyl) are produced. Excess 2-vinyl pyridine reacts with (PNP)Re(H)(4) preferentially at the vinyl group, to give 2-ethyl pyridine and the sigma-vinyl complex (PNP)ReH[eta(2)-CH=CH(2-py)]. The DFT and X-ray structures show, by various comparisons, the ability of the PNP amide nitrogen to pi-donate to an otherwise unsaturated d(4) Re(III) center, showing short Re-N distances consistent with the presence of pi-donation.     

Cobalt Chalcogenide Clusters. Synthesis,Characterization and DFT Calculations of [Co4Se2(CO)10] and [Co4Te2(CO)11]. Crystal Structure of [Co8Se4(CO)16(μ‐dppa)2]

The reactions of [Co₂(CO)₈] with E(SiMe₃)₂ (E = Se, Te) in CH₂Cl₂ result in the formation of the compounds [Co₄Se₂(CO)₁₀]> ( 1 ) and [Co₄Te₂(CO)₁₁] ( 2 ), respectively. Both cluster complexes have similar molecular structures in which the cobalt atoms form four‐membered rings with μ₄‐bridging chalcogen atoms (Se and Te) above and below the plane of the metal atoms and the carbonyl ligands as either terminal or μ₂‐bridging ligands. DFT‐calculations for both compounds have been carried out in order to obtain some more information about their electronic distribution. In the presence of the phosphine Ph₂PC≡CPPh₂ (dppa), the reaction of [Co₂(CO)₈] with Se(SiMe₃)₂ leads to the formation of [Co₈Se₄(CO)₁₆(μ‐dppa)₂] ( 3 ). During the reaction two molecules of [Co₂(CO)₈] have been added to the acetylene groups of the dppa ligands, whilst the remaining cobalt atoms coordinate to the phosphorus atoms of the phosphine. In this compounds the selenium atoms act as μ₃‐ligands, bridging the metal atoms bonded to the phosphorus with those bonded to the acetylene groups.     

A telescoped Knochel-Hauser/Kumada-Corriu coupling strategy to functionalized aromatic heterocycles

The direct application of Knochel-Hauser derivative arylmagnesium halides in Kumada-Corriu couplings is described. By utilizing the in situ-generated Grignard reagents, the transmetalation with stoichiometric zinc salts to known Negishi coupling conditions is avoided, thereby streamlining the transformation. Several aromatic hetereocycles participate in the deprotonation and couple with a variety of phenyl iodides and bromides in isolated yields up to 81%. The parent system is demonstrated on 6?g scale with 79% yield, and monitored via ReactIR to show the stability of the Grignard and progression of the deprotonation/CC coupling reaction.     

Fabrication of three-dimensional photonic crystals with tunable photonic properties by biotemplating

Photonic crystals with tunable D-surface structures for possible high-temperature gas- and temperature-sensing applications were prepared by a biotemplating method. This included infiltrating colored scales of the beetle Entimus imperialis with an organopolysiloxane mixture followed by simultaneous combustion of the template and calcination of the cured organopolysiloxane. A high-yield inorganic silica-based replica of the original structure was obtained, which is capable of withstanding temperatures up to 600 °C. Light- and scanning electron microscopy combined with focused ion beam milling showed a precise replication of the whole scales and their internal D-surface structure. Fourier-transform infrared spectroscopy and X-ray diffraction analysis confirmed the complete curing of the organopolysiloxanes and their transformation into amorphous silica during calcination. The dielectric constant of the manufactured materials determined by Abbé refractometry was ? = 2.3180 and used to perform band structure calculations utilizing the plane wave expansion method. By changing the chain length and degree of crosslinking of the organopolysiloxane precursor mixture, the lattice parameters and filling factors, and therefore the photonic properties of the replicas, could be tuned.     

In situ Synthesis of Oligonucleotide Arrays on Surfaces Coated with Crosslinked Polymer Multilayers

We report an approach to the in situ synthesis of oligonucleotide arrays on surfaces coated with crosslinked polymer multilayers. Our approach makes use of methods for the 'reactive' layer-by-layer assembly of thin, amine-reactive multilayers using branched polyethyleneimine (PEI) and the azlactone-functionalized polymer poly(2-vinyl-4,4'-dimethylazlactone) (PVDMA). Post-fabrication treatment of film-coated glass substrates with d-glucamine or 4-amino-1-butanol yielded hydroxyl-functionalized films suitable for the Maskless Array Synthesis (MAS) of oligonucleotide arrays. Glucamine-functionalized films yielded arrays of oligonucleotides with fluorescence intensities and signal-to-noise ratios (after hybridization with fluorescently labeled complementary strands) comparable to those of arrays fabricated on conventional silanized glass substrates. These arrays could be exposed to multiple hybridization-dehybridization cycles with only moderate loss of hybridization density. The versatility of the layer-by-layer approach also permitted synthesis directly on thin sheets of film-coated poly(ethylene terephthalate) (PET) to yield flexible oligonucleotide arrays that could be readily manipulated (e.g., bent) and cut into smaller arrays. To our knowledge, this work presents the first use of polymer multilayers as a substrate for the multi-step synthesis of complex molecules. Our results demonstrate that these films are robust and able to withstand the ~450 individual chemical processing steps associated with MAS (as well as manipulations required to hybridize, image, and dehybridize the arrays) without large-scale cracking, peeling, or delamination of the thin films. The combination of layer-by-layer assembly and MAS provides a means of fabricating functional oligonucleotide arrays on a range of different materials and substrates. This approach may also prove useful for the fabrication of supports for the solid-phase synthesis and screening of other macromolecular or small-molecule agents.