Reversible Clustering of Gold Nanoparticles under Confinement

A limiting factor of solvent‐induced nanoparticle self‐assembly is the need for constant sample dilution in assembly/disassembly cycles. Changes in the nanoparticle concentration alter the kinetics of the subsequent assembly process, limiting optical signal recovery. Herein, we show that upon confining hydrophobic nanoparticles in permeable silica nanocapsules, the number of nanoparticles participating in cyclic aggregation remains constant despite bulk changes in solution, leading to highly reproducible plasmon band shifts at different solvent compositions.     

Optical Response of Porous Titania‐Silica Waveguides to Surface Charging in Electrolyte Filled Pores

In this work, we present a novel method for in situ investigation of surface charging and ion transport inside nanopores of titania‐silica waveguide by means of the optical‐waveguide‐lightmode spectroscopy. Porous oxide waveguides show a strong optical response when exposed to electrolyte solutions, and this response is consistent with oxide surface charging due to changes in ionic strength and pH of the solution in contact with the waveguide. The optical response to pH or electrolyte concentration change is stabilized within several minutes when the solution ionic strength is sufficiently high (0.1M ), while it takes two orders of magnitude longer to reach stable optical response at very low ionic strengths (<0.1mM ). The relaxation times at the high ionic strength are still by several orders of magnitude slower than expected from bulk diffusion coefficients of electrolytes in water. Our results indicate that diffusion of electrolytes is severely hindered (and more so with decreasing ionic strength) in charged pores inside waveguides.     

New Fluorescent Sensors Based on 1<Emphasis Type=Italic>H</Emphasis>-pyrazolo[3,4-<Emphasis Type=Italic>b</Emphasis>]quinoline Skeleton

Novel fluorescing dyes 1,3,4-triphenyl-6-(1,4,7,10-tetraoxa-13-aza-cyclopentadec-13-ylmethyl)-1H-pyrazolo[3,4-b]quinoline (K1) and 2-[(2-hydroxyethyl)-(1,3,4-triphenyl-1H-pyrazolo[3,4-b]quinolin-6-ylmethyl)-amino]ethanol (L1) have been synthesized and investigated by the means of steady state and time-resolved fluorescence techniques. These compounds act as sensors for the fluorescence detection of small inorganic cations (lithium, sodium, barium, magnesium and calcium) in solvents of different polarities (THF and acetonitrile). The mechanism, which allows application of these compounds as sensors, is an electron transfer from the electro-donative part of molecule to the acceptor part (fluorophore), which is retarded upon complexation of the electro-donative part by inorganic cations. We found that crown ether-containing compound is very sensitive to the addition of any investigated ions but amino alcohol-containing one exhibits better selectivity to the addition of two-valued cations. Two kinds of the complexes (LM⁺ and L₂M⁺) were found in the investigated systems. In addition, the dyes may be used as fluorescence indicators in solvents of lower polarity like tetrahydrofuran.     

Synthesis and properties of cationic polyelectrolyte with regioregular polyalkylthiophene backbone and ionic‐liquid like side groups

High‐regioregular poly{3‐[6‐(1‐methylimidazolium‐3‐yl)hexyl]thiophene‐2,5‐diyl bromide}, PMHT‐Br, has been prepared by reaction of high‐regioregular (above 92%) poly[3‐(6‐bromohexyl)thiophene‐2,5‐diyl] with 1‐methylimidazole. PMHT‐Br is soluble in water and water miscible solvents such as methanol, DMSO and shows solvatochromism; λ_max (nm): 423 (H₂O); 435 (MeOH); 452 (DMSO). Increased absorption band broadening observed for aqueous solution as well as NMR spectra in D₂O suggests a micelle‐like structure of PMHT‐Br molecules in these solutions: poly(3‐hexylthiophene) core and 1‐methylimidazolium bromide shell. Despite the disturbing effect of ionic groups, the solid‐state PMHT‐Br shows absorption maximum at 520 nm, the band edge at 660 nm (ca. 1.9 eV), and fluorescence emission with maximum at 635 nm, in a good agreement with the polymer regioregularity. Fluorescence emission maxima: λ_em (nm): 598 (H₂O); 562 (MeOH); 574 (DMSO), occur in a vicinity of corresponding adsorption band edges. Plot of electrical conductivity of PMHT‐Br (measured under the dynamic vacuum conditions, 5 × 10^?5 Pa) versus 1/T shows a break at about 70 °C same as the temperature dependence of λ_max of the solid PMHT‐Br. These breaks indicate an increase in the mobility of polymer segments and ions within PMHT‐Br; however, a thermal analysis did not provide solid evidence for it. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3073–3081, 2010     

Synthesis of betulin derivatives and the determination of their relative lipophilicities using reversed‐phase thin‐layer chromatography

A series of superlipophilic or highly lipophilic semisynthetic betulin derivatives was prepared and their relative lipophilicity was measured by reversed‐phase thin‐layer chromatography (RP‐TLC) at different pH values using 1,4‐dioxane–acetate buffer mixtures as mobile phases. Cholesterol, 17β‐estradiol and pure betulin were used as the reference compounds. Linear relationships were found between R_M values and 1,4‐dioxane concentrations in the mobile phases. LogP values were also calculated with computer programs ACD/LogP (ChemSketch 11.0, Advanced Chemistry Development Inc.) and ClogP (Daylight Chemical Information Systems Inc.). The empirical and theoretical data were compared, and the R_M0 values correlated well with logP. Two of the synthesized betulin derivatives are reported for the first time. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of catechin and epicatechin in the peel of apple varieties resistant and non-resistant to apple scab

Catechin and epicatechin were analysed in the peel of six apple cultivars (three resistant and three non-resistant to apple scab). Two methods of analytical sample preparation following extraction were tested: solid phase extraction and column separation with Sephadex LH-20 coupled to a differential refractometric detector. Prior to GC and GC-MS analyses, these compounds were silylized. This permitted co-injection with standards and the comparison of retention values and mass spectra with those recorded for standards. The content of catechin and epicatechin in apple peel is discussed in relation to the resistance of apple trees to scab.     

Chromatographic and capillary electrophoretic determination of microcystins

Microcystins are cyclic peptide hepatotoxins that are produced during blooming of cyanobacteria. In recent two decades they gained a great interest because of the related ecological and public health risks. Over 70 different analogs of microcystins have been isolated from natural blooms and laboratory cultures of cyanobacteria. Because they are inhibitors of protein phosphatases they act as tumor promoters, but on the other hand, inhibitive enzymatic and ELISA methods may be employed for their screening or quantitative determination. Much larger analytical potential for this purpose have, however high‐performance separation chromatographic and electromigration techniques. Based on about 70 references from original journal papers these methods are reviewed together with presentation of their preconcentration methods and clean‐up procedures for analyzing environmental samples. Some attention is also focused on increasing application of LC/MS methods, and comparison of separation techniques with immunochemical or enzymatic methods.     

The impact of insecticides containing deltamethrin and cyfluthrin on the composition of surface compounds in the larvae,females and males of Tenebrio molitor

This paper presents the effect of insecticides on the composition of the surface compounds of one of the most harmful insects, Tenebrio molitor, by analysis using GC–MS. As a result of the use of insecticides, the composition of the chemical compounds on the surface of insects changes, depending on the insecticides used. The most numerous groups of the marked compounds were fatty acids, alkanes, esters and sterols. The content of the identified compounds in the larvae increased at both 24 and 48 h after the application of insecticides, in comparison with the control samples. The content of identified compounds in the samples taken from the females increased 24, 48 and 72 h after the application of insecticides in comparison with the control samples. By contrast, in samples prepared from males, the content of identified compounds decreased 24 h after the application of insecticides, compared with the control samples. The highest content of chemical compounds was for fatty acids and alkanes after the use of insecticides. The content of fatty acids after the application of the insecticide with deltamethrin was 62.1 ± 3.3–466.9 ± 5.9 μg/g, and after the application of the insecticide with cyfluthrin was 49.9 ± 1.9–458.3 ± 4.2 μg/g. However, the content of alkanes after the use of deltamethrin was 115.6 ± 4.2–4672.0 ± 32.1 μg/g, and after the use of cyfluthrin was 189.4 ± 3.8–3975.0 ± 10.2 μg/g.     

Indirectly Detected DNP-Enhanced 17O NMR Spectroscopy: Observation of Non-Protonated Near-Surface Oxygen at Naturally Abundant Silica and Silica-Alumina

Recent studies have shown that dynamic nuclear polarization (DNP) can be used to detect ¹⁷O solid-state NMR spectra of naturally abundant samples within a reasonable experimental time. Observations using indirect DNP, which relies on ¹H mediation in transferring electron hyperpolarization to ¹⁷O, are currently limited mostly to hydroxyls. Direct DNP schemes can hyperpolarize non-protonated oxygen near the radicals; however, they generally offer much lower signal enhancements. In this study, we demonstrate the detection of signals from non-protonated ¹⁷O in materials containing silicon. The sensitivity boost that made the experiment possible originates from three sources: indirect DNP excitation of ²⁹Si via protons, indirect detection of ¹⁷O through ²⁹Si nuclei using two-dimensional ²⁹Si{¹⁷O} D-HMQC, and Carr-Purcell-Meiboom-Gill refocusing of ²⁹Si magnetization during acquisition. This ²⁹Si-detected scheme enabled, for the first time, 2D ¹⁷O−²⁹Si heteronuclear correlation spectroscopy in mesoporous silica and silica-alumina surfaces at natural abundance. In contrast to the silanols showing motion-averaged ¹⁷O signals, the framework oxygens exhibit unperturbed powder patterns as unambiguous fingerprints of surface sites. Along with hydroxyl oxygens, detection of these moieties will help in gaining more atomistic-scale insights into surface chemistry.     

Sustainable Drying and Torrefaction Processes of Miscanthus for Use as a Pelletized Solid Biofuel and Biocarbon-Carrier for Fertilizers

Miscanthus is resistant to dry, frosty winters in Poland and most European Union countries. Miscanthus gives higher yields compared to native species. Farmers can produce Miscanthus pellets after drying it for their own heating purposes. From the third year, the most efficient plant development begins, resulting in a yield of 25–30 tons of dry matter from an area of 1 hectare. Laboratory scale tests were carried out on the processes of drying, compacting, and torrefaction of this biomass type. The analysis of the drying process was conducted at three temperature levels of the drying agent (60, 100, and 140 °C). Compaction on a hydraulic press was carried out in the pressure range characteristic of a pressure agglomeration (130.8–457.8 MPa) at different moisture contents of the raw material (0.5% and 10%). The main interest in this part was to assess the influence of drying temperature, moisture content, and compaction pressure on the specific densities (DE) and the mechanical durability of the pellets (DU). In the next step, laboratory analyses of the torrefaction process were carried out, initially using the Thermogravimetric Analysis TGA and Differential Scaning Calorimeter DSC techniques (to assess activation energy (EA)), followed by a flow reactor operating at five temperature levels (225, 250, 275, 300, and 525 °C). A SEM analysis of Miscanthus after torrefaction processes at three different temperatures was performed. Both the parameters of biochar (proximate and ultimate analysis) and the quality of the torgas (volatile organic content (VOC)) were analyzed. The results show that both drying temperature and moisture level will affect the quality of the pellets. Analysis of the torrefaction process shows clearly that the optimum process temperature would be around 300–340 °C from a mass loss ratio and economical perspective.