Initial stages of oxidation of Cu(1 1 1)

Several surface analysis techniques were combined to study the initial stages of oxidation of Cu(1 1 1) surfaces exposed to O₂ at low pressure (<5 × 10⁻⁶ mbar) and room temperature. Scanning tunneling microscopy (STM) results show that the reactivity is governed by the restructuring of the Cu(1 1 1) surface. On the terraces, oxygen dissociative adsorption leads to the formation of isolated O adatoms and clusters weakly bound to the surface. The O adatoms are located in the fcc threefold hollow sites of the unrestructured terraces. Friedel oscillations with an amplitude lower than 5 pm have been measured around the adatoms. At step edges, surface restructuring is initiated and leads to the nucleation and growth of a two-dimensional disordered layer of oxide precursor. The electronic structure of this oxide layer is characterised by a band gap measured by scanning tunneling spectroscopy to be ∼1.5 eV wide. The growth of the oxide islands progresses by consumption of the upper metal terraces to form triangular indents. The extraction of the Cu atoms at this interface generates a preferential orientation of the interface along the close-packed directions of the metal. A second growth front corresponds to the step edges of the oxide islands and progresses above the lower metal terraces. This is where the excess Cu atoms extracted at the first growth front are incorporated. STM shows that the growing disordered oxide layer consists of units of hexagonal structure with a first nearest neighbour distance characteristic of a relaxed Cu-Cu distance (∼0.3 nm), consistent with local Cu₂O(1 1 1)-like elements. Exposure at 300 °C is necessary to form an ordered two-dimensional layer of oxide precursor. It forms the so-called “29” superstructure assigned to a periodic distorted Cu₂O(1 1 1)-like structure.     

Transfection and imaging of diamond nanocrystals as scattering optical labels

We report on the first demonstration of nanodiamond (ND) as a scattering optical label in a biological environment. NDs were efficiently transfected into cells using cationic liposomes, and imaged using differential interference and Hoffman modulation ‘space’ contrast microscopy techniques. We have shown that 55 nm NDs are biologically inert and produce a bright signal compared to the cell background. ND as a scattering label presents the possibility for extended biological imaging with relatively little thermal or biochemical perturbations due to the optical transparency and biologically inert nature of diamond.     

Very Facile Polarity Umpolung and Noncovalent Functionalization of Inorganic Nanoparticles: A Tool Kit for Supramolecular Materials Chemistry

The facile assembly of shell‐by‐shell (SbS)‐coated nanoparticles [TiO₂?PAC₁₆]@shell 1 – 7 (PAC₁₆=hexadecylphosphonic acid), which are soluble in water and can be isolated as stable solids, is reported. In these functional architectures, an umpolung of dispersibility (organic apolar versus water) was accomplished by the noncovalent binding of ligands 1 – 7 to titania nanoparticles [TiO₂?PAC₁₆] containing a first covalent coating with PAC₁₆. Ligands 1 – 7 are amphiphilic and form the outer second shell of [TiO₂?PAC₁₆]@shell 1 – 7 . The tailor‐designed dendritic building blocks 3 – 5 contain negative and positive charges in the same molecule, and ligands 6 and 7 contain a perylenetetracarboxylic acid dimide (PDI) core ( 6 / 7 ) as a photoactive reporter component. In the redox and photoactive system [TiO₂?PAC₁₆]@shell 7 , electronic communication between the inorganic core to the PDI ligands was observed.     

Influence of camphorsulfonic acid in nitroxide‐mediated styrene miniemulsion polymerization

The rate‐accelerating effects of camphorsulfonic acid (CSA) on nitroxide‐mediated styrene miniemulsion polymerization were studied. Polymerizations were initiated with benzoyl peroxide (BPO) as an initiator and mediated with either 2,2,6,6‐tetramethylpiperidinyloxy (TEMPO) or 4‐hydroxy‐2,2,6,6‐tetramethylpiperidinyloxy (OH‐TEMPO). Although CSA has been used to accelerate the rate in bulk nitroxide‐mediated polymerizations, it has not been well studied in emulsion/miniemulsion. With dispersed systems, the effectiveness of CSA is likely to be affected by partitioning between the aqueous and organic phases. In styrene miniemulsion experiments performed over a range of conditions, the effect of adding CSA varied from negligible to significantly increasing the final conversion and molecular weight, depending on the nitroxide:BPO ratio. At a ratio of nitroxide:BPO = 1.7, the effect of CSA addition is small, whereas the final conversion and molecular weight are dramatically enhanced by CSA addition when the nitroxide:BPO ratio is 3.6. CSA is most effective in enhancing the rate and molecular weight when the initial free‐nitroxide concentration is higher. The magnitude of the rate and molecular weight enhancement was similar for TEMPO and OH‐TEMPO despite their differences in water solubility. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2828–2841, 2002     

Two-dimensional thermometry using temperature-induced line shifts of ZnO:Zn and ZnO:Ga fluorescence

Sensitive temperature-induced line shifts of the near-band-edge emission from ZnO:Ga and ZnO:Zn are investigated for two-dimensional (2D) thermometry with nanosecond time resolution. Spectral and temporal concerns for 2D measurements and the feasibility for utilizing the line shifts for temperature measurements using a spectral ratio are investigated. Owing to the high temperature sensitivity, a precision of 1% at 800 K is reported for spectral ratio measurements. The technique is demonstrated by 2D measurements of the liquid temperature of burning methanol droplets.     

Mixed Aggregates of 1-Methoxyallenyllithium with Lithium Chloride

A combined computational and ¹³C NMR study was used to investigate the formation of mixed aggregates of 1-methoxyallenyllithium and lithium chloride in tetrahydrofuran (THF) solution. The observed and calculated chemical shifts, as well as the calculated free energies of mixed aggregate formation (MP2/6-31+G(d)), are consistent with the formation of a mixed dimer as the major species in solution. Free energies of mixed dimer, trimer, and tetramer formation were calculated by using the B3LYP and MP2 methods and the 6-31+G(d) basis set. The two methods generated different predictions of which mixed aggregates will be formed, with B3LYP/6-31+G(d) favoring mixed trimers and tetramers in THF solution, and MP2/6-31+G(d) favoring mixed dimers. Formation of the sterically unhindered mixed dimers is also consistent with the enhanced reactivity of these compounds in the presence of lithium chloride. The spectra are also consistent with some residual 1-methoxyallenyllithium tetramer, as well as small amounts of higher mixed aggregates. Although neither computational method is perfect, for this particular system, the calculated free energies derived using the MP2 method are in better agreement with experimental data than those derived using the B3LYP method.     

Two-level structured self-adaptive surfaces with reversibly tunable properties

We report a route to fabricate two-level structured self-adaptive surfaces (SAS) of polymer materials. The first level of structure is built by a rough polymer film that consists of needlelike structures of micrometer size. The second level of structure is formed by the nanoscopic self-assembled domains of a demixed polymer brush irreversibly grafted onto the needles. By exposing the surface to solvents that are selective to one of the components of the brush, we reversibly tune the surface properties. The large-scale surface structure amplifies the response and enables us to control wettability, adhesion, and chemical composition of the surface over a wide range.     

Catalytic,Asymmetric Synthesis of Phosphonic γ‐(Hydroxyalkyl)butenolides with Contiguous Quaternary and Tertiary Stereogenic Centers

A procedure that enables high yielding access to phosphonic γ‐(hydroxyalkyl)butenolides with excellent regio‐, diastereo‐ and enantiocontrol is reported. The simultaneous construction of up to two adjacent quaternary stereogenic centers by a catalytic asymmetric vinylogous Mukaiyama aldol reaction unites biologically and medicinally relevant entities, namely α‐hydroxy phosphonates and γ‐(hydroxyalkyl)butenolides. This is achieved by utilizing a readily available chiral copper‐sulfoximine catalyst showing a broad functional group tolerance for both the electrophilic and nucleophilic reactants. A discussion about potential factors affecting the observed level of enantioselectivity, which stems from the enantiopure sulfoximine ligand, is also included.     

Palladium-catalyzed α-arylation of ketones on solid support: scope and limitations

The palladium-catalyzed α-arylation of ketones on solid support is described. Using modified Buchwald-Hartwig reaction conditions, the coupling of immobilized 4-bromobenzamide with various aromatic, heteroaromatic, and aliphatic ketones was investigated. Subsequent cleavage from the resin provided the desired α-aryl ketones almost in moderate to high yields and good to excellent purities. The scope and limitations of this protocol will be discussed.