Reactions of a carbene stabilised indium trihydride complex, [InH3{CN(Mes)C2H2N(Mes)}] Mes = mesityl,with transition metal complexes

The reactivity of the carbene stabilised indium trihydride complex, [InH₃(IMes)] IMes = 1,3-dimesitylimidazol-2-ylidene, toward a variety of transition metal complexes has been investigated. The study has shown that the InH₃ complex can act as a carbene and/or hydride transfer reagent to transition metal centres but does not yield heterobimetallic materials. Two new complexes, [Cp₂Ti(-Cl)₂Zn(IMes)Cl] and [CpNi(H)(IMes)], have resulted from this work, both of which have been spectroscopically and structurally characterised.     

Methods for research on immune complement activation on modified sensor surfaces

We have developed a methodological system consisting of a new surface sensitive quartz crystal microbalance with dissipation monitoring (QCM-D) sensor surfaces together with different surface modification methods for the investigation of surface associated complement activation in human sera. The QCM-D surface, 10 mm in diameter, was modified by spin-coating of poly(urethane urea) (PUUR) and polystyrene (PS). Some sensor surfaces were also sputtered with titanium (Ti) or modified by hydrophobic self-assembled monolayer (SAM) of an 18-carbon alkane thiol with a ---CH₃ end group. The amount of surface deposited complement protein was investigated by incubation of the modified sensor surfaces in human sera, followed by incubation with antibodies directed against complement factor 3c (C3c). The amounts of bound anti-C3c were then used as an arbitrary measure of surface induced complement activation. The order of complement activation of the different surfaces, as judged by three separate measurements per surface modification, was PUUR>PS=SAM>Ti. The Ti surface had a similar low degree of anti-C3c binding as the negative controls (heat inactivated sera). The novel QCM-D methodology was found to be very simple, accurate, sensitive and well suited as a screening method for complement activation and protein adsorption on different materials. We also compared the sensitivity of QCM-D method with surface plasmon resonance (SPR) for the quantification of protein adsorption and complement activation on gold sensor surfaces. The QCM-D method was equally sensitive as the SPR for the detection of protein adsorption from a solution independently if low flow rate (5 μl/min) was used. A slight increase in sensitivity was found at higher flow rate (30 μl/min). However, we found it difficult to use the SPR method on the Ti, PS and PUUR surfaces due to decreased light penetration of the modified SPR sensor chip.     

Capillary-channeled polymer fibers as stationary phases in liquid chromatography separations

A method utilizing capillary-channeled polymer (C-CP) fibers as stationary phases in high-performance liquid chromatographic separations has been investigated. Polymeric fibers of differing backbones (polypropylene and polyester) having nominal diameters of approximately 50 and approximately 35 microm and a channeled structure on their periphery were packed into stainless steel tubing (305 x 4.6 mm I.D.) for use in reversed-phase separations of various mixtures. The fibers have eight channels running continuously along the axis which exhibit very high surface activity. As such, solvent transport is affected through the channels through wicking action. Bundles of 1000-3000 fibers are loaded co-linearly into the tubing, providing flow channels extending the entire length of the columns. As a result, backing pressures are significantly lowered (approximately 50% reduction) in comparison to packed-sphere columns. In addition, the capital costs of the fiber material (< US$0.25 per column) are very attractive. Flow-rates of up to 5 ml/min can be used to achieve near baseline separation of related compounds in reasonable run times, indicating very fast mobile phase mass transfer (C-terms). The polymer stationary phases demonstrate high selectivity for a wide variety of analytes with gradient elution employed successfully in many instances. Specifically, separations of three polyaromatic hydrocarbons (benzo[a]pyrene, chrysene, pyrene), mixtures of both organic and inorganic lead compounds [chlorotriethyllead, chlorotriphenyllead, lead nitrate, lead(II) phthalocyanine], and a lipid standard of triglycerides were accomplished on the polymeric stationary phases. Other species of biological interest, including groups of aliphatic and aromatic amino acids have also been effectively separated. The reversed-phase nature of the fiber surfaces is supported through atomic force microscopy measurements using hydrophilic and hydrophobic functionalized polystyrene beads as the probe tips. Separations of the various analytes demonstrate the feasibility of utilizing C-CP fibers as stationary phases in reversed-phase LC. It is envisioned that columns of this nature would be particularly useful in prep-scale separations as well as for immobilization matrices for organic constituents in aqueous environments.     

Quadracyclic Adenine: A Non‐Perturbing Fluorescent Adenine Analogue

Fluorescent‐base analogues (FBAs) comprise a group of increasingly important molecules for the investigation of nucleic acid structure and dynamics as well as of interactions between nucleic acids and other molecules. Here, we report on the synthesis, detailed spectroscopic characterisation and base‐pairing properties of a new environment‐sensitive fluorescent adenine analogue, quadracyclic adenine (qA). After developing an efficient route of synthesis for the phosphoramidite of qA it was incorporated into DNA in high yield by using standard solid‐phase synthesis procedures. In DNA qA serves as an adenine analogue that preserves the B‐form and, in contrast to most currently available FBAs, maintains or even increases the stability of the duplex. We demonstrate that, unlike fluorescent adenine analogues, such as the most commonly used one, 2‐aminopurine, and the recently developed triazole adenine, qA shows highly specific base‐pairing with thymine. Moreover, qA has an absorption band outside the absorption of the natural nucleobases (>300 nm) and can thus be selectively excited. Upon excitation the qA monomer displays a fluorescence quantum yield of 6.8 % with an emission maximum at 456 nm. More importantly, upon incorporation into DNA the fluorescence of qA is significantly less quenched than most FBAs. This results in quantum yields that in some sequences reach values that are up to fourfold higher than maximum values reported for 2‐aminopurine. To facilitate future utilisation of qA in biochemical and biophysical studies we investigated its fluorescence properties in greater detail and resolved its absorption band outside the DNA absorption region into distinct transition dipole moments. In conclusion, the unique combination of properties of qA make it a promising alternative to current fluorescent adenine analogues for future detailed studies of nucleic acid‐containing systems.     

Micelle-sequestered dissociation of cationic DNA-intercalated drugs: unexpected surfactant-induced rate enhancement

Detergent sequestration using micelles as a hydrophobic sink for dissociated drug molecules is an established technique for determination of dissociation rates. The anionic surfactant molecules are generally assumed not to interact with the anionic DNA and thereby not to affect the rate of dissociation. By contrast, we here demonstrate that the surfactant molecules sodium dodecyl sulfate (SDS), sodium decyl sulfate, and sodium octyl sulfate all induce substantial rate enhancements of the dissociation of intercalators from DNA. Four different cationic DNA intercalators are studied with respect to surfactant-induced dissociation. Except for the smallest intercalator, ethidium, the dissociation rate constants increase monotonically with surfactant concentration both below cmc and (more strongly) above cmc, much more than expected from electrostatic effects of increased counterion concentration. The rate enhancement, most pronounced for the bulky, multicationic, hydrophobic DNA ligands in this study, indicates a reduction of the activation energy for the ligand to pass out from a deeply penetrating intercalation site of DNA. The discovery that surfactants enhance the rate of dissociation of cationic DNA-intercalators implies that rate constants previously determined by micelle-sequestered dissociation may have been overestimated. As an alternative, more reliable method, we suggest instead the addition of excess of dummy DNA as an absorbent for dissociated ligand.     

Adsorption of crude oil on anhydrous and hydrophobized vermiculite

This publication reports the adsorption of crude oil on vermiculite samples, expanded and hydrophobized with carnauba (Copernícia Cerífera) wax. The adsorption studies were performed by using columns filled with the vermiculite matrices and by dispersion of the vermiculite samples in an oil-water (50 ppm of oil) emulsion. The hydrate vermiculite exhibits a very low adsorption capacity against crude oil. On the other hand, anhydrous (expanded) and hydrophobized matrices show a high adsorption capacity. The 10% hydrophobized matrix show a 50% increased adsorption capacity, in comparison with the expanded one. For adsorption performed in the water-oil emulsion, saturation of the solid hydrophobized matrix is achieved after 60 min. The hydrophobized samples exhibit adsorption factors in the 0.7-1.0 range.     

Preparation of methyl (1R,2S,5S)- and (1S,2R,5R)-2-amino-5-tert-butyl-cyclopentane-1-carboxylates by parallel kinetic resolution of methyl (RS)-5-tert-butyl-cyclopentene-1-carboxylate

Comparison of the kinetic and parallel kinetic resolutions of methyl (RS)-5-tert-butyl-cyclopentene-1-carboxylate allows for the efficient synthesis of both (1R,2S,5S)- and (1S,2R,5R)-enantiomers of methyl 2-amino-5-tert-butyl-cyclopentane-1-carboxylate.