Reaktion an Polymerisationen und Polymerisationsinitiatoren. 16. Mitt. Einfluß von Thioxo-Gruppen in Barbitursäurederivaten auf die Polymerisationsauslösung von Methacrylsäuremethyl-ester

Ohne Zusammenfassung     

The effectivity of solvents as electron pair donors

The effectivity of solvents as electron pair donors, their donicity as expressed by their donor numbers DN, is reexamined. The linear dependence of the enthalpy and the Gibbs free energy for the reaction of donor solvents with antimony pentachloride is affirmed. Extension of the DN scale by other measured quantities, via their linear correlations for sets of solvents where both kinds of data are known is applied to Drago's E-C scale, Kamlet's scale, and Koppel's B scale. This extension, added to previous extensions employing Selbin's D_{I, II} and Popov's ²³Na, produces a DN scale for 170 solvents. The relation of DN measured for isolated solvent molecules in 1,2-dichloroethane to DN values measured for bulk solvents is examined by means of the scaled particle theory and solute-solvent interaction terms. A scale of normalized donor numbers DN ^N is presented. These values are practically the same as the scale, and for those solvents for which DN values are presented here and values are lacking, they can serve in their place for those preferring to use the scale for donor solvents.     

Surface characterization of three marine bacterial strains by Fourier transform IR, X-ray photoelectron spectroscopy, and time-of-flight secondary-ion mass spectrometry, correlation with adhesion on stainless steel surfaces

Adhesion of bacterial strains on solid substrates is likely related to the properties of the outer shell of the micro-organisms. Aiming at a better understanding and control of the biofilm formation in seawater, the surface chemical composition of three marine bacterial strains was investigated by combining Fourier transform IR spectroscopy, X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary-ion mass spectrometry (ToF-SIMS). The D41 strain surface showed evidence of proteins, as deduced from the NH2 and NCO XPS and ToF-SIMS fingerprints; this strain was found to adhere to stainless steel, glass, or Teflon surfaces in a much higher quantity (2 orders of magnitude) than the two other ones, DA and D01. The latter are either enriched in COOH or sulfates, and this makes them more hydrophilic and less adherent to all substrates. Correlations with physicochemical properties and adhesion seem to demonstrate the role of the external layer composition, in particular the role of proteins more than that of hydrophobicity, on their adhesion abilities.     

Two-level structured self-adaptive surfaces with reversibly tunable properties

We report a route to fabricate two-level structured self-adaptive surfaces (SAS) of polymer materials. The first level of structure is built by a rough polymer film that consists of needlelike structures of micrometer size. The second level of structure is formed by the nanoscopic self-assembled domains of a demixed polymer brush irreversibly grafted onto the needles. By exposing the surface to solvents that are selective to one of the components of the brush, we reversibly tune the surface properties. The large-scale surface structure amplifies the response and enables us to control wettability, adhesion, and chemical composition of the surface over a wide range.     

Artificial multiple criticality and phase equilibria: an investigation of the PC-SAFT approach

The perturbed-chain statistical associating fluid theory (PC-SAFT) is studied for a wide range of temperature, T, pressure, p, and (effective) chain length, m, to establish the generic phase diagram of polymers according to this theory. In addition to the expected gas-liquid coexistence, two additional phase separations are found, termed "gas-gas" equilibrium (at very low densities) and "liquid-liquid" equilibrium (at densities where the system is expected to be solid already). These phase separations imply that in one-component polymer systems three critical points occur, as well as equilibria of three fluid phases at triple points. However, Monte Carlo simulations of the corresponding system yield no trace of the gas-gas and liquid-liquid equilibria, and we conclude that the latter are just artefacts of the PC-SAFT approach. Using PC-SAFT to correlate data for polybutadiene melts, we suggest that discrepancies in modelling the polymer density at ambient temperature and high pressure can be related to the presumably artificial liquid-liquid phase separation at lower temperatures. Thus, particular care is needed in engineering applications of the PC-SAFT theory that aims at predicting properties of macromolecular materials.     

Micelle-sequestered dissociation of cationic DNA-intercalated drugs: unexpected surfactant-induced rate enhancement

Detergent sequestration using micelles as a hydrophobic sink for dissociated drug molecules is an established technique for determination of dissociation rates. The anionic surfactant molecules are generally assumed not to interact with the anionic DNA and thereby not to affect the rate of dissociation. By contrast, we here demonstrate that the surfactant molecules sodium dodecyl sulfate (SDS), sodium decyl sulfate, and sodium octyl sulfate all induce substantial rate enhancements of the dissociation of intercalators from DNA. Four different cationic DNA intercalators are studied with respect to surfactant-induced dissociation. Except for the smallest intercalator, ethidium, the dissociation rate constants increase monotonically with surfactant concentration both below cmc and (more strongly) above cmc, much more than expected from electrostatic effects of increased counterion concentration. The rate enhancement, most pronounced for the bulky, multicationic, hydrophobic DNA ligands in this study, indicates a reduction of the activation energy for the ligand to pass out from a deeply penetrating intercalation site of DNA. The discovery that surfactants enhance the rate of dissociation of cationic DNA-intercalators implies that rate constants previously determined by micelle-sequestered dissociation may have been overestimated. As an alternative, more reliable method, we suggest instead the addition of excess of dummy DNA as an absorbent for dissociated ligand.     

Optimisation and robustness analysis of a hydrophobic interaction chromatography step

Process development, optimisation and robustness analysis for chromatography separations are often entirely based on experimental work and generic knowledge. The present study proposes a method of gaining process knowledge and assisting in the robustness analysis and optimisation of a hydrophobic interaction chromatography step using a model-based approach. Factorial experimental design is common practice in industry today for robustness analysis. The method presented in this study can be used to find the critical parameter variations and serve as a basis for reducing the experimental work. In addition, the calibrated model obtained with this approach is used to find the optimal operating conditions for the chromatography column. The methodology consists of three consecutive steps. Firstly, screening experiments are performed using a factorial design. Secondly, a kinetic-dispersive model is calibrated using gradient elution and column load experiments. Finally, the model is used to find optimal operating conditions and a robustness analysis is conducted at the optimal point. The process studied in this work is the separation of polyclonal IgG from BSA using hydrophobic interaction chromatography.     

Molar volumes and ion pairing of lithium halides in alcohols

The concentration dependence of the apparent molar volumes of lithium halides (and electrolytes in general) in alcohols (and solvents permitting association in general) is, in the first instance, due to changes in the degree of association and to the inherent difference between the apparent molar volumes of the ions and of the ion pairs. Previous publications on the molar volumes of electrolytes in organic solvents, disregarding altogether ion pairing, appear to be incorrect. Data from the literature for lithium chloride and lithium bromide in normal primary alcohols and several branched alcohols from C₁ to C₈ and data from our laboratory for lithium halides in 1-hexanol and 2-ethyl-1-hexanol served for the determination of φ _V and φ _E . Electrical and structural contributions to the values of these functions for the ions and for the ion pairs are discussed.     

Separation and identification of organic and organometallic compounds by use of a liquid chromatography-particle beam-glow discharge mass spectrometry combination

Evaluation of the particle beam glow discharge mass spectrometry (PB-GDMS) system as a detector for liquid chromatography (LC) is described for the analysis of polycyclic aromatic hydrocarbons, steroids, selenoamino acids, and alkyllead compounds. A particle beam interface is used to introduce analyte species from the LC into a glow discharge source for subsequent vaporization and ionization. Mass spectra display classic EI fragmentation patterns for the organic compounds, as well as elemental and molecular information for the organometallic compounds. Chromatographic separations display good temporal correlation between UV and PB-GDMS detection modes. Detection limits for Pb in lead nitrate, triethyllead, and triphenyllead fall in the sub-ppb (ng) range.     

Stereoselective synthesis of optically active bicyclic beta-lactam carboxylic acids that target pilus biogenesis in pathogenic bacteria

Optically active bicyclic beta-lactams were synthesized, starting from 2-H-delta 2-thiazolines and Meldrum's acid derivatives. Several methods to accomplish an ester hydrolysis without damaging the beta-lactam framework were investigated. A rapid CsOH saponification of the beta-lactam methyl esters was developed and protonation of the Cs-carboxylates by Amberlite (IR-120 H+) afforded a series of bicyclic beta-lactam carboxylic acids. Moreover, a convenient method for the synthesis of 2-H-delta 2-thiazolinecarboxylic acid methyl ester 2 was developed. Bicyclic beta-lactam carboxylic acids 7a-g and aldehydes 4a-d were screened for their affinity to the bacterial periplasmic chaperone PapD using a surface plasmon resonance technique. beta-Lactams substituted with large acyl substitutents showed better binding to the chaperone than the native C-terminal peptide PapG 8, demonstrating that bicyclic beta-lactams constitute a new class of potential bacterial chaperone inhibitors.