Fingerprinting of bottle-grade poly(ethylene terephthalate) via matrix-assisted laser desorption/ionization mass spectrometry

Matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) has been shown to provide a valuable technique to study the thermomechanical degradation of poly(ethylene terephthalate) (PET). MALDI-MS has been tested to monitor both the admixture of post-consumption bottle-grade PET (PET_pc-btg) with virgin bottle-grade PET (PET_v-btg) and the thermomechanical degradation effects on the chemical properties of PET_v-btg. Principal component analysis of MALDI-MS data classify the samples into groups with specific features: a) PET-btg with intrinsic viscosities of 0.80 or 0.65-0.60 dL g⁻¹); b) processed or virgin PET with the same intrinsic viscosity; c) PET_v-btg from PET containing PET_pc-btg; and d) PET_v-btg from different manufacturers. MALDI-MS data is therefore able to reveal the quality of PET-btg resins preventing frauds and illegal use of recycled PET-btg.     

Direct analysis of biodiesel microemulsions using an inductively coupled plasma mass spectrometry

An analytical procedure for direct introduction of biodiesel samples into an inductively coupled plasma mass spectrometer (ICP-MS) by using microemulsion for sample preparation was developed here. Cadmium, Co, Cu, Mn, Ni, Pb, Ti, and Zn were determined in biodiesel microemulsified samples prepared from different oleaginous sources (African palm, castor beans, palm, soybeans and an unknown oleaginous). Microemulsions were prepared using 0.25 mL Triton X-100, 0.25 mL 20% v v^− 1 HNO₃, 0.50 mL biodiesel sample and 4.0 mL n-propanol. Argon-oxygen mixture was added to the plasma as auxiliary gas for correcting matrix effects caused by the high carbon load due to biodiesel microemulsions. The oxygen gas flow rate was set in 37.5 mL min^− 1. The accuracy of the developed procedure was evaluated by applying addition-recovery experiments for biodiesel samples from different sources. Recoveries varied from 76.5 to 116.2% for all analytes but Zn in castor beans biodiesel sample (65.0 to 76.2%). Recoveries lower than 86.6% were obtained for palm biodiesel sample, probably due to matrix effects. Detection limits calculated by using oxygen in the composition of the auxiliary gas added to the plasma were higher than those calculated without using it, probably due to the highest formation of oxides. Despite oxides formation, best analytical performance was reached by using oxygen as auxiliary gas and by proper correction of transport interferences. The developed procedure based on microemulsion formation was suitable for direct introduction of biodiesel samples in ICP-MS.     

Theoretical basis for the correlation between energetic, magnetic, and electron density criteria of aromaticity: definition of molecular circuit electric conductance

Using a semiclassical model, a theoretical basis for the correlation between energetic, magnetic, and electron density criteria of aromaticity has been established. The key quantity that links ring current intensity, topological resonance energy, and multicenter electron delocalization is the molecular circuit electric conductance, which is defined as the inverse of the resistance of the molecular circuit to the electron flow when an external electromotive force is exerted on it. The particular case of an external magnetic field applied perpendicularly to the molecular plane is employed here as source of the electromotive force. In addition, it is shown how aromatic stabilization can be estimated quantitatively by means of multicenter electron delocalization in PAHs and nitrogenated polyheterocyclic compounds.     

A theoretical study of the hydrogen bond donor capability and co-operative effects in the hydrogen bond complexes of the diaza-aromatic betacarbolines

In this work, we present a quantum mechanical investigation on the hydrogen bond interactions of N(9)-methyl-9H-pyrido[3,4-b]indole, MBC, and N(2)-methyl-9H-pyrido[3,4-b]indole, BCA, with different hydrogen bond donors. Thus, it has been analysed the influence that the hydrogen bond donor strength and the co-operative effect of the increasing number of donor molecules have on the shape of the potential energy surfaces versus the N···H distances, r(N–H). To rationalize the nature of the interactions, the Bader theory has been applied and the characteristics of the bond critical points analysed. The results show that two different hydrogen bond complexes can be formed depending on the donor capabilities or the number of donor molecules included in the calculations. The topological parameters from the Bader theory are used to justify the statement that the analysed interactions can be classified as weak or partially covalent hydrogen bond interactions, respectively. As experimentally observed, weak hydrogen bond donors form weak hydrogen bond complexes, called HBC. Upon the increase of the donor strength the N···H proton is shifted nearest to the nitrogen atom giving rise to the observation of a stronger hydrogen bond complex, the proton transfer complex, PTC. The most outstanding result of these studies is the fact that the formation of the PTC can also be managed just by changing the number of donor molecules, that is, by a co-operative effect of the hydrogen bonds.     

Testosterone metabolism revisited: discovery of new metabolites

The metabolism of testosterone is revisited. Four previously unreported metabolites were detected in urine after hydrolysis with KOH using a liquid chromatography–tandem mass spectrometry method and precursor ion scan mode. The metabolites were characterized by a product ion scan obtained with accurate mass measurements. Androsta-4,6-dien-3,17-dione, androsta-1,4-dien-3,17-dione, 17-hydroxy-androsta-4,6-dien-3-one and 15-androsten-3,17-dione were proposed as feasible structures for these metabolites on the basis of the mass spectrometry data. The proposed structures were confirmed by analysis of synthetic reference compounds. Only 15-androsten-3,17-dione could not be confirmed, owing to the lack of a commercially available standard. That all four compounds are testosterone metabolites was confirmed by the qualitative analysis of several urine samples collected before and after administration of testosterone undecanoate. The metabolite androsta-1,4-dien-3,17-dione has a structure analogous to that of the exogenous anabolic steroid boldenone. Specific transitions for boldenone and its metabolite 17β-hydroxy-5β-androst-1-en-3-one were also monitored. Both compounds were also detected after KOH treatment, suggesting that this metabolic pathway is involved in the endogenous detection of boldenone previously reported by several authors.     

Real-time monitoring of the progress of polymerization reactions directly on surfaces at open atmosphere by ambient mass spectrometry

The progress of an on-surface polymerization process involving alkyl and perfluoroalkyl silanes and siloxanes was monitored in real-time via easy ambient sonic spray ionization mass spectrometry (EASI-MS). When sprayed on surfaces, the organosilicon compounds present in commercially available nanofilm products (NFPs) react by condensation to form a polymeric coating. A NFP for coating of floor materials (NFP-1) and a second NFP for coating tiles and ceramics (NFP-2) were applied to glass, filter paper or cotton surfaces and the progress of the polymerization was monitored by slowly scanning the surface. Via EASI(+)-MS monitoring, significant changes in the composition of hydrolysates and condensates of 1H,1H,2H,2H-perfluorooctyl triisopropoxysilane (NFP-1) and hexadecyl triethoxysilane (NFP-2) were observed over time. The abundances of the hydrolyzed species decreased compared with those of the non-hydrolysed species for both NFP-1 and NFP-2 and the heavier oligomers became relatively more abundant over a period of 15-20 min. A similar tendency favouring the heavier oligomers was observed via EASI(-)-MS. This work illustrates the potential of ambient mass spectrometry for the direct monitoring of polymerization reactions on surfaces.     

The Role of the Eu<Superscript>3+</Superscript> Concentration on the SrMoO<Subscript>4</Subscript>:Eu Phosphor Properties: Synthesis,Characterization and Photophysical Studies

SrMoO₄ doped with rare earth are still scarce nowadays and have attracted great attention due to their applications as scintillating materials in electro-optical like solid-state lasers and optical fibers, for instance. In this work Sr_1−xEu_xMoO₄ powders, where x = 0.01; 0.03 and 0.05, were synthesized by Complex Polymerization (CP) Method. The structural and optical properties of the SrMoO₄:Eu³⁺ were analyzed by powder X-ray diffraction patterns, Fourier Transform Infra-Red (FTIR), Raman Spectroscopy, and through Photoluminescent Measurements (PL). Only a crystalline scheelite-type phase was obtained when the powders were heat-treated at 800 °C for 2 h, 2θ = 27.8° (100% peak). The excitation spectra of the SrMoO₄:Eu³⁺ (λ_Em. = 614 nm) presented the characteristic band of the Eu^3 + 5L₆ transition at 394 nm and a broad band at around 288 nm ascribed to the charge-transfer from the O (2p) state to the Mo (4d) one in the SrMoO₄ matrix. The emission spectra of the SrMoO₄:Eu³⁺ powders (λ_Exc. = 394 and 288 nm) show the group of sharp emission bands among 523–554 nm and 578–699 nm, assigned to the ⁵D₁→⁷F_{0,1and 2} and ⁵D₀→⁷F_{0,1,2,3 and 4}, respectively. The band related to the ⁵D₀→⁷F₀ transition indicates the presence of Eu³⁺ site without inversion center. This hypothesis is strengthened by the fact that the band referent to the ⁵D₀→⁷F₂ transition is the most intense in the emission spectra.     

A multicomponent approach to the synthesis of 1,3-dicarbonylic compounds

A general synthesis of 1,3-dicarbonylic compounds using multicomponent reactions of isocyanides is described. The process involves a Passerini three-component condensation of glyoxal derivatives, isocyanides and acetic acid, followed by metal mediated reductive or solvolytic removal of the acid component. Noteworthy, reductive deacetoxylation of Passerini glyoxylamide adducts was successfully achieved using photochemically activated SmI₂. This procedure constitutes a novel convenient method for the direct synthesis of malonic retro-peptidic subunits.