Voltammetric determination of L-dopa using an electrode modified with trinuclear ruthenium ammine complex (Ru-red) supported on Y-type zeolite

The L-dopa is the immediate precursor of the neurotransmitter dopamine. Unlike dopamine, L-dopa easily enters the central nervous system and is used in the treatment of Parkinson’s disease. A sensitive and selective method is presented for the voltammetric determination of L-dopa in pharmaceutical formulations using a carbon paste electrode modified with trinuclear ruthenium ammine complex [(NH₃)₅Ru^IIIORu^IV(NH₃)₄ORu^III(NH₃)₅]⁶⁺ (Ru-red) incorporated in NaY zeolite. The parameters which influence on the electrode response (paste composition, potential scan rate, pH and interference) were also investigated. The optimum conditions were found to an electrode composition (m/m) of 25% zeolite containing 6.7% Ru, 50% graphite and 25% mineral oil in acetate buffer at pH 4.8. Voltammetric peak currents showed a linear response for L-dopa concentration in the range between 1.2×10⁻⁴ and 1.0×10⁻² mol l⁻¹ (r=0.9988) with a detection limit of 8.5×10⁻⁵ mol l⁻¹. The variation coefficient for a 1.0×10⁻³ mol l⁻¹ L-dopa (n=10) was 5.5%. The results obtained for L-dopa in pharmaceutical formulations (tablet) was in agreement with compared official method. In conclusion, this study has illustrated that the proposed electrode modified with Ru-red incorporated zeolite is suitable valuable for selective measurements of L-dopa.     

Flow injection system with gas diffusion for the sequential determination of total nitrogen and phosphorus in vegetables

 A flow injection system was developed for the sequential determination of total nitrogen and phosphorus in digests of vegetables using potentiometric and spectrophotometric detection systems, respectively. A tubular ammonium selective electrode with a sensor system composed of nonactin/monactin in tris(2-ethylhexyl) phosphate was used. The selectivity limitations of this electrode were overcome by the inclusion of a gas-diffusion unit in the system that separated ammonium from the rest of the sample matrix and allowed the determination of total nitrogen and phosphorus by the partition of the sample plug between two streams. The results obtained with the developed FIA system were in good agreement with those of the reference methods. Sampling rates from 40 to 60 samples per hour and relative standard deviations below 3.5% were achieved. Received: 17 October 1996/Revised: 21 November 1996/Accepted: 27 November 1996     

Reactions of carbethoxycarbene with enaminones. Formation of unexpected pyrroles

The reactions of carbethoxycarbene (:CH₂-CO₂Et, 2) with several acyclic enaminones (RCOCH=CR¹NHR², 3) lead to the unexpected formation of 2-Me, 3-CO₂Et, 4-H, 5-R¹-pyrroles 4 . Structural variations of the enaminones show that the structural fragments C(3)-CO₂Et and C(2)-Me are provided by 2 and that the fragment C(5)-R¹NHR² originates from the enaminones 3 , while the RCO group from 3 is eliminated during the course of reaction. Reactions with cyclic and nitrogen-hindered enaminones do not lead to pyrrole formation but occur by simple insertion of 2 to the Cα-H bond.     

Photostability of a photochromic naphthopyran dye in different sol-gel prepared ormosil coatings

A photochromic naphthopyran derivative was embedded in sol-gel prepared thin ormosil films. The resulting samples show high transparency and exhibit a strong red colouration upon irradiation with UV light. The photostability of the photochromic molecules is strongly related to the nature of the embedding ormosil matrix. The introduction of organic functional groups into the inner pore surface of the matrix allows tailoring the chemical environment where the dye molecules will be allocated, in terms of the effectiveness of the interaction between the photochromic molecules and the Si-OH groups on the surface of the pores, affecting the stability of the molecules upon prolonged exposition to UV light. The photostability of the molecules was increased in matrices functionalized with larger organic groups, or with larger amount of modifying groups. In this way the photodegradation of the photochromic molecules could be reduced by a factor of 5, as compared with the photodegradation of the molecules in unfunctionalized silica matrix.     

Determination of pirimicarb and endosulfan in commercial pesticide formulations by Fourier transform infrared spectrometry

A routine method based on Fourier transform infrared spectrometry was developed for the simultaneous determination of pirimicarb and endosulfan in commercially available pesticide formulations. The method is based on peak area absorbance measurements between 1362 and 1352 cm(-1), corrected with a baseline fixed at 1338 cm(-1), for pirimicarb and peak area absorbance measurements between 919 and 909 cm(-1) with a baseline fixed at 931 cm(-1) for endosulfan; chloroform solutions for analysis were obtained by direct dilution of emulsifiable concentrates or by solvent extraction from solid samples. Various extraction conditions and appropriate band selection were investigated, and interference studies were performed. Under the experimental conditions selected, limits of detection of 13 microg/g for pirimicarb and 150 microg/g for endosulfan were obtained that correspond to 0.13 and 1.6% (w/w), respectively, in commercial samples. Results from analyses of commercial samples by the developed method compared well with those obtained by a liquid chromatography reference method.     

Solvent effect in cis-1,4 polymerization of 1,3-butadiene by a catalyst based on neodymium

In this work a laboratory polymerization scale process was studied for the production of polybutadiene with high content of cis-1,4 repeating units. A Ziegler-Natta catalytic system based on neodymium versatate (catalyst), diisobutylaluminium hydride (cocatalyst) and tert-butyl chloride (chlorinating agent) was used. The influence of solvent nature (pure grade) and possible contaminants (electron donors) in a recovered solvent from a butadiene-styrene anionic polymerization industrial plant on the stereoselectivity and catalytic activity, molecular weight and molecular weight distribution of the resultant polybutadienes was studied. The polymers were characterized by infrared spectroscopy and size exclusion chromatography. Polybutadienes with cis-1,4 units content in the range of 99-98% were produced. The polymers weight-average molecular weight, , varied from 2.23 × 10⁵ to 4.47 × 10⁵ and the molecular weight distribution, MWD, from 3.1 to 5.1.     

Synthesis of novel fullerene amino acids and their multifullerene peptides

[60]-Fullerene functionalized amino acids with 4-6 methylene spacers from α-carbon to the nitrogen atom of fulleropyrolidine and corresponding multifullerene peptides have been synthesized.     

Finite-size scaling for Potts models

Recently, Borgs and Kotecký developed a rigorous theory of finite-size effects near first-order phase transitions. Here we apply this theory to the ferromagneticq-state Potts model, which (forq large andd2) undergoes a first-order phase transition as the inverse temperature is varied. We prove a formula for the internal energy in a periodic cube of side lengthL which describes the rounding of the infinite-volume jumpE in terms of a hyperbolic tangent, and show that the position of the maximum of the specific heat is shifted by _m (L)=(Inq/E)L ^–d +O(L ^–2d ) with respect to the infinite-volume transition point _t . We also propose an alternative definition of the finite-volume transition temperature _t (L) which might be useful for numerical calculations because it differs only by exponentially small corrections from _t .     

Online preconcentration system for determining ultratrace amounts of Cd in vegetal samples using thermospray flame furnace atomic absorption spectrometry

A system has been developed for online preconcentration and determination of Cd using thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS). It is based on the solid-phase extraction of Cd in an Amberlite XAD-2 minicolumn loaded with 2-(2-thiazolylazo)-5-dimethylaminophenol (TAM), and the metal ion is eluted with 1 mol L⁻¹ hydrochloridric acid, followed by its determination. The online system allows determining Cd with a detection limit of 8.0 ng L⁻¹ and a quantification limit of 25.0 ng L⁻¹. The precision (repeatability), calculated as the relative standard deviation (% RSD) in sample solutions containing 0.5 and 3.0 μg L⁻¹ of Cd, was 6.1 and 4.5%, respectively. The preconcentration factor obtained was 24. The system’s accuracy was confirmed by analyzing the following certified reference materials (CRMs): Rice flour NIES 10b, Apple leaves NIST 1515 and Orchard leaves NBS 1571. This procedure was applied to the determination of Cd in cabbage and powdered guarana samples.     

Tentoxin as a scaffold for drug discovery. Total solid-phase synthesis of tentoxin and a library of analogues

[reaction: see text] A solid-phase method for the synthesis of tentoxin has been developed. Two key steps-dehydration and N-alkylation-are carried out while the peptide is anchored to the resin. The method, which has been validated by the preparation of a library of tentoxin analogues, should be applicable to the generation of further libraries that have the tentoxin scaffold structure, as well as other structures containing N-alkylated didehydroamino acids.