A facile and efficient procedure for the synthesis of new benzimidazole-2-thione derivatives

A series of benzimidazole-2-thione derivatives was synthesized using a reaction between the macrocyclic aminal 16H,13H-5:12,7:14-dimethanedibenzo[d,i]-[1,3,6,8] tetraazecine (DMDBTA, 5) and various nucleophiles in the presence of carbon disulfide. A full chemical characterization using IR, 1H-, 13C-NMR and GC-MS analyses of the new compounds is provided. These compounds were separated from the reaction mixture by column chromatography (CC) in highly pure form in 15%-51.4% yield.     

Highly stereoselective synthesis of tertiary propargylic centers and their isomerization to enantiomerically enriched allenes

Center of attention: A new approach for the synthesis of enantiomerically enriched allenes by isomerization of 2-p-tolylsulfinylphenyl propargylic derivatives is presented, which in turn are prepared by reaction of sulfinylated lithium benzylcarbanions with arylsulfonylacetylenes. The high control of stereoselectivity in both steps is exerted by the sulfinyl group.     

Easy dual-mode ambient mass spectrometry with Venturi self-pumping, canned air, disposable parts and voltage-free sonic-spray ionization

An exceptionally easy to assemble source for ambient mass spectrometry is described. Based on Venturi easy ambient sonic-spray ionization (V-EASI), the source was further simplified by the use of a can of compressed air which simultaneously provides solution or solvent Venturi self-pumping and continuous, stable and abundant low-noise ion signal via voltage-free sonic-spraying. Further simplification was also attained by the use of inexpensive and readily commercially available parts: a surgical 2-way catheter, an aerosol can of compressed air, a 30 cm long fused-silica capillary and a hypodermic needle. This "Spartan" V-EASI source seems to offer one of the easiest and cheapest ways to make ions for ambient desorption/ionization mass spectrometry analysis of both liquid and solid samples.     

Mechanistic insight on the catecholase activity of dinuclear copper complexes with distant metal centers

The catecholase activity of two dinuclear Cu(II) complexes with distant metal centers is discussed together with solid state and solution studies. The crystal structure for one of them, [Cu(2)(diep)(H(2)O)(4)](ClO(4))(4)·2H(2)O, is described, showing the two copper ions are 7.457 ? apart and in a square pyramidal coordination. Both complexes display a weak antiferromagnetic coupling in the solid state that is manifest in the dimer EPR spectra obtained in frozen solution. The pH-potentiometric speciation performed in 1:1 MeOH-H(2)O allowed the assignment of hydrolyzed copper species as those catalytically active in the oxidation of 3,5-di-tert-butylcatechol (DTBC). The kinetic measurements led us to propose behavior consistent with Michaelis-Menten plus a linear dependence of the initial rate on [DTBC]. This can be associated with the presence of more than one catalytically active species, which is consistent with the evidence of several differently hydrolyzed species shown in the predominance diagrams. Product characterization studies led to establishing the formation of hydrogen peroxide during the catalytic cycle, while semiquinone and superoxide radicals were detected by EPR spectroscopy, supporting one-electron transference at each of the copper centers.     

Interfacial concentrations of chloride and bromide in zwitterionic micelles with opposite dipoles: experimental determination by chemical trapping and a theoretical description

Interfacial concentrations of chloride and bromide ions, with Li(+), Na(+), K(+), Rb(+), Cs(+), trimethylammonium (TMA(+)), Ca(2+), and Mg(2+) as counterions, were determined by chemical trapping in micelles formed by two zwitterionic surfactants, namely N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (HPS) and hexadecylphosphorylcholine (HDPC) micelles. Appropriate standard curves for the chemical trapping method were obtained by measuring the product yields of chloride and bromide salts with 2,4,6-trimethyl-benzenediazonium (BF(4)) in the presence of low molecular analogs (N,N,N-trimethyl-propane sulfonate and methyl-phosphorylcholine) of the employed surfactants. The experimentally determined values for the local Br(-) (Cl(-)) concentrations were modeled by fully integrated non-linear Poisson Boltzmann equations. The best fits to all experimental data were obtained by considering that ions at the interface are not fixed at an adsorption site but are free to move in the interfacial plane. In addition, the calculation of ion distribution allowed the estimation of the degree of ion coverage by using standard chemical potential differences accounting for ion specificity.     

Dimensional Matching of Polycyclic Aromatics with Rectangular Metallacycles: Insertion Modes Determined by [C?H⋅⋅⋅π] Interactions

A family of Pd^II/Pt^II dinuclear receptors, designed to give a smooth increase in their cavity lengths (from 7.46–13.78 Å), is presented. Their inclusion complexes with a representative set of polycyclic aromatic substrates (naphthalene, carbazol, pyrene, and benzo[a]pyrene), were characterized and studied in aqueous solution and the solid state. By taking into account the dimensions of both receptors and substrates, an excellent complementarity was found between the size of the receptors and their ability to complex a given substrate. Furthermore, this dimensional matching results in specific binding modes depending on the ability of the guest to establish stabilizing [C? H???π] interactions with the host.     

Development and validation studies for determination of phenylpropanoid‐substituted flavan‐3‐ols in semipurified extract of Trichilia catigua by high‐performance liquid chromatography with photodiode array detection

The phenolic compounds are the main phytochemical constituents of the bark of Trichilia catigua and are commonly used for medicinal purposes. An HPLC method for the simultaneous quantification of phenolic compounds (procyanidin B2 (PB2), epicatechin (EPC), chinchonains Ia, Ib, IIa, IIb, catechin, and chrologenic acid) in T. catigua extract was developed and validated. A suitable chromatographic system was selected, which uses a gradient elution with methanol/ACN (75:25), and water both with 0.05% TFA, as mobile phase, column Luna, 280 nm, and flow 0.4 mL/min. Validation of the analytical method was based on the parameters: linearity, precision, LODs and LOQs, accuracy, robustness, and stability. The method showed linearity for PB2 and EPC, in the range 10–120 μg/mL with good correlation coefficients (>0.996). For precision, the repeatability ranged from 1.89 to 3.23%, and the values for accuracy for PB2 and EPC were 95 and 89%, respectively. The LODs and LOQs for PB2 were 1.36 and 4.12 μg/mL, and for EPC were 2.18 and 6.61 μg/mL, respectively. The method was robust under the conditions employed. The proposed method could be employed for quality assessment of T. catigua, as well as pharmaceutical products.     

Simple One-Pot Synthesis of New Derivatives of the Macrocyclic Aminal 1,3,7,9,13,15,19,21-Octaazapentacyclo-[19.3.1.13,7.19,13.115,19]octacosane (OAPO)

A series of 2,2′-(dihydropyrimidine-1,3(2H,4H)-diyldimethanediyl)bis(substituted-phenols) was synthesized using a Mannich-type reaction between the macrocyclic aminal 1,3,7,9,13,15,19,21-octaazapentacyclo[19.3.1.1^3,7.1^9,13.1^15,19]octacosane (OAPO) (1) and substituted phenols in basic media. These previously unreported compounds were separated from the reaction mixture by column chromatography in highly pure form with 25–75% yields. The most stable conformer was predicted using AM1-type semiempirical quantum chemical calculations.     

Phenol Nitration from A 2-(Nitrooxy)Ethyl Side Chain

A novel nitration of phenols is described on 2-(3-hydroxy-4-methoxyphenyl)ethyl nitrate (2), which is synthesized by three alternative routes.     

Cyclohexane‐1,3‐dione as a derivatizing agent for the analysis of aldehydes by micelar electrokinetic chromatography with diode array detection

Aldehydes are important compounds in a large number of samples, especially food and beverages. In this work, for the first time, cyclohexane‐1,3‐dione (CHD) was used as a derivatizing reagent aiming aldehyde (formaldehyde, acetaldehyde, propionaldehyde, and valeraldehyde) analysis by MEKC‐DAD. The optimized separation of the derivates was performed using a voltage program (+20 kV, 0–15 min.; +23 kV, 15–17 min.) at a temperature of 26°C, and using as the running buffer a mixture containing 100 mmol/L of sodium dodecyl sulfate and 29 mmol/L of sodium tetraborate at pH 9.2, with maximum absorbance at 260 nm. CHD was compared with two other derivatizing agents: 3‐methyl‐2‐benzothiazolinone hydrazone and phenylhydrazine‐4‐sulfonic acid. The CHD‐aldehyde derivatives were also characterized by LC‐MS. The calibration curves for all aldehydes had r² above 0.999 and LODs ranged from 0.01 to 0.7 mg/L. The optimized methodology was applied in sugar cane brandy (cachaça) samples successfully. CHD showed to be an alternative derivatization reagent due to its stability, aqueous solubility, high selectivity and sensitivity, reduced impurities, and simple preparation steps.