The influence of shear bands on final structure and magnetic properties of 3% Si non-oriented silicon steel

The presence of shear bands in the deformed material before final annealing is very important for Goss and Cube textures formation in silicon steel [S.C. Paolinelli, M.A. Cunha, J. Magn. Magn. Mater. 255 (2003) pp. 379. [1]; J.T. Park, J.A. Szpunar, Acta Mater., 51 (2003) 3037. [2]]. The increase of the hot-band grain size can increase the number of shear bands, which favor the nucleation of these orientations. In this work, the effect of the hot band grain size variation, promoted by varying the hot rolling finishing temperature, on final structure and magnetic properties was investigated for 3% Si alloy. It was found that the increase of the hot-band grain size increases the occurrence of shear bands and promotes an increase of η fiber fraction and a reduction of γ fiber fraction, improving the magnetic induction. On the other hand, the final grain size is reduced when the hot-band grain size is larger than 190 μm, deteriorating the core loss values in spite of the texture benefits. The reduction of final grain size was explained by the increase of the number of nuclei at the beginning of the recrystallization caused by the increase of shear bands in the deformed material.     

Complex dynamics and configurational entropy of spatial optical solitons in nonlocal media

Intense light propagating in a nonlinear medium can generate an ensemble of interacting filaments of light, or spatial solitons. Using nematic liquid crystals, we demonstrate that the filaments exhibit collective behavior typical of complex systems, including the formation of clusters and soundlike vibrations, as well as the reduction of the configurational entropy, controlled by the degree of nonlocality of the medium.     

Excellent passivation of thin silicon wafers by HF‐free hydrogen plasma etching using an industrial ICPECVD tool

In this work, hydrogen plasma etching of surface oxides was successfully accomplished on thin (～100 µm) planar n‐type Czochralski silicon wafers prior to intrinsic hydrogenated amorphous silicon [a‐Si:H(i)] deposition for heterojunction solar cells, using an industrial inductively coupled plasma‐enhanced chemical vapour deposition (ICPECVD) platform. The plasma etching process is intended as a dry alternative to the conventional wet‐chemical hydrofluoric acid (HF) dip for solar cell processing. After symmetrical deposition of an a‐Si:H(i) passivation layer, high effective carrier lifetimes of up to 3.7 ms are obtained, which are equivalent to effective surface recombination velocities of 1.3 cm s^–1 and an implied open‐circuit voltage (V_oc) of 741 mV. The passivation quality is excellent and comparable to other high quality a‐Si:H(i) passivation. High‐resolution transmission electron microscopy shows evidence of plasma‐silicon interactions and a sub‐nanometre interfacial layer. Using electron energy‐loss spectroscopy, this layer is further investigated and confirmed to be hydrogenated suboxide layers. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Practical aspects of Mössbauer spectroscopy instrumentation

The setting up and updating of a Mössbauer laboratory imply the acquisition and assembling of different units. Guidelines concerning either the construction or the acquisition of the various parts which compose a Mössbauer spectrometer are given in this paper.     

Iron-57 Mössbauer spectroscopic studies of materials of composition Fe x NbTiP3O12: materials with low concentrations of iron and the effects of treatment in air

The⁵⁷Fe Mössbauer spectrum recorded from the material of composition Fe_0.25NbTiP₃O₁₂ shows the presence of Fe²⁺ in a distribution of approximately octahedral type I sites within the channels of the NbTiP₃O₁₂ structure. A comparison of the results with those recorded from the material Fe_0.33NbTiP₃O₁₂ demonstrates the existence of an upper limit to the occupation by the Fe²⁺ species of the type I sites. Lattice parameter measurements and⁵⁷Fe Mössbauer spectroscopy show that treatment of Fe_0.25NbTiP₃O₁₂ in air induces the migration of the incorporated iron from the channels to form macroscopic -Fe₂O₃.     

The rate difference between the weak decays of t and in supersymmetry

We find that the CP-violating asymmetry

Full-size image

at the one-loop order within the minimal supersymmetric extension of the standard model is of the order of few percent for maximal CP violation. It could be measured by considering the rate difference in the one-lepton events.     

Iron homeostasis in neuronal cells: a role for IREG1

Background  

Iron is necessary for neuronal function but in excess generates neurodegeneration. Although most of the components of the iron homeostasis machinery have been described in neurons, little is known about the particulars of their iron homeostasis. In this work we characterized the response of SH-SY5Y neuroblastoma cells and hippocampal neurons to a model of progressive iron accumulation.