Design and self-assembly of ditopic and tetratopic cavitand complexes

The self-assembly of open ditopic and tetratopic cavitand complexes has been investigated by using monofunctionalized cavitand ligands and suitable metal precursors. In the case of ditopic complexes, self-assembly protocols, leading exclusively to the formation of both thermodynamically stable cis-Pt square-planar complexes 8 and 9 and the kinetically inert fac-Re octahedral complex 14, have been elaborated. The use of cis-[Pt(CH3)CN)2Cl2] as metal precursor led to the formation of monotopic trans-10 and ditopic trans-11 cavitand complexes, while cis-[Pt(dmso)2Cl2] afforded both cis-13 and trans-11 isomers. The self-assembly of tetratopic cavitand complexes has been achieved by using mononuclear [Pd(CH3CN)4(BF4)2] and dinuclear [M2(tppb)(OTf)4] (19: M = Pt; 20: M = Pd) metal precursors. Only the tetratopic dinuclear complexes 21 and 22 were stable. The ligand configuration with two phosphorus and two cavitand ligands at the metal centers is the most appropriate to build tetratopic cavitand complexes with sufficient kinetic stability.     

Surface plasmon resonance biosensor for genetically modified organisms detection

The development of a surface plasmon resonance (SPR) affinity biosensor based on DNA hybridisation is described. This biosensor has been applied to genetically modified organisms (GMOs) detection. Single stranded DNA (ssDNA) probes were immobilised on the sensor chip of an SPR device and the hybridisation between the immobilised probe and the complementary sequence (target) was monitored. The probe sequences were internal to the sequence of 35S promoter and NOS terminator which are inserted sequences in the genome of GMO regulating the transgene expression. The system has been optimised using synthetic oligonucleotides, then applied to real samples analysis. Samples, containing the transgenic target sequences, were amplified by polymerase chain reaction (PCR) and then detected with the SPR biosensor.     

An expedient one-pot entry to catecholestrogens and other catechol compounds via IBX-mediated phenolic oxygenation

A one-pot procedure for the preparation of catecholestrogens in over 90% yield is reported, involving oxygenation of 17β-estradiol or estrone with o-iodoxybenzoic acid (IBX) followed by reduction with methanolic NaBH₄. The procedure, which was extended to the o-hydroxylation of a number of representative phenols in good-to-high yields, expands significantly the scope of phenolic oxidation mediated by IBX.     

The EPR study of dialkyl nitroxides as probes to investigate the exchange of solutes between micellar and water phases

An EPR investigation of the kinetics of the exit, k ^-, and entrance, k ⁺, processes in micelles of sodium dodecyl sulfate, hexadecyltrimethylammonium bromide and polyoxyethylene(6)decanol of a family of para-substituted benzyl tert -butyl nitroxides and para-substituted benzyl hydroxyalkyl nitroxides is reported. The inclusion of nitroxide probes in the hydrophobic environment of the micelle gives rise to a reduction of the value of both nitrogen and β-proton splittings, with the result that the resonance fields for the M_I(2H _β ) = ±1lines of the free and included species are significantly different. The rate constants were obtained by analyzing the EPR line shape variations as function of surfactant concentration and temperature. The experimental value of k ⁺ obtained from the study of benzyl tert-butyl nitroxide indicates that the association reaction is very close to being controlled by diffusion. The value of the exit rate, k ^-, instead, depends on the probe hydrocarbon chain length. A comparison of our results with those obtained by luminescence quenching techniques is also reported.     

A new pyridine-based 12-membered macrocycle functionalised with different fluorescent subunits; coordination chemistry towards Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II)

The coordination chemistry of the new pyridine-based, N2S2-donating 12-membered macrocycle 2,8-dithia-5-aza-2,6-pyridinophane (L1) towards Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II) has been investigated both in aqueous solution and in the solid state. The protonation constants for L1 and stability constants with the aforementioned metal ions have been determined potentiometrically and compared with those of ligand L2, which contains a N-aminopropyl side arm. The measured values show that Hg(II) in water has the highest affinity for both ligands followed by Cu(II), Cd(II), Pb(II), and Zn(II). For each metal ion considered, 1:1 complexes with L1 have also been isolated in the solid state, those of Cu(II) and Zn(II) having also been characterised by X-ray crystallography. In both complexes L1 adopts a folded conformation and the coordination environments around the two metal centres are very similar: four positions of a distorted octahedral coordination sphere are occupied by the donor atoms of the macrocyclic ligand, and the two mutually cis-positions unoccupied by L1 accommodate monodentate NO3- ligands. The macrocycle L1 has then been functionalised with different fluorogenic subunits. In particular, the N-dansylamidopropyl (L3), N-(9-anthracenyl)methyl (L4), and N-(8-hydroxy-2-quinolinyl)methyl (L5) pendant arm derivatives of L1 have been synthesised and their optical response to the above mentioned metal ions investigated in MeCN/H2O (4:1 v/v) solutions.     

Ratios between content of fatty acids as markers for mixture of cow and goat milk

The fat of mixture of goat and cow milk, extracted by di-ethylic ether, was gas chromatographically analysed in order to propose an analytical procedure suitable to reveal small additions of cow milk to goat milk. The obtained results show evident differences in the percentages of some fatty acids. An attempt to apply the peak area ratios, corresponding to the methyl esters of fatty acids, suggested by the literature for cow milk did not yield good results. Other ratios suitable to reveal even the presence of low percentages (up to 5 %) of cow milk in goat milk were found and proposed in this paper. Such ratios are sensitive and can be defined markers towards cow or goat milk and also towards extraneous fat like lard or colza seeds oil.     

Face Selectivity of the Diels-Alder Additions of 2-Substituted 5,6-bis((E)-chloromethylidene)bicyclo[2.2.2]octanes

The preparation of 5,6-bis((E)-chlorommethylidene)bicyclo[2.2.2]oct-2-ene ( 13 ), 2,3-bis((E)-chloromethyl idene)-5exo,6exo- and -5endo,6endo-epoxybicyclo[2.2.2] octane ( 14 and 15 ), 5,6-bis((E)-chloromethylidene)-2exo- and -2endo-bicyclo[2.2.2] octanol ( 16 and 17 ) and 5,6-bis((E)-chloromethylidene)-2-bicyclo[2.2.2]octanone ( 18 ) are described. The face selectivity (endo-face vs. exo-face attack onto the exo-cyclic diene) of their cycloadditions to tetracyanoethylene has been determined in benzene at 20°. It is 78/22, 80/20, 60/40, 68/32, 3/97 and 30/70 for 13 , 14 , 15 , 16 , 17 and 18 , respectively.     

Can simple enones be useful partners for the catalytic stereoselective alkylation of indoles?

A new catalytic system for the first example of enantioselective Friedel-Crafts-type (FC) addition of indoles to simple enones is described. The use of an equimolar amount of chiral [Al(salen)Cl] and 2,6-lutidine (10 mol %) was found to be effective in promoting the conjugate addition of indoles to (E)-arylcrotyl ketones, furnishing the corresponding beta-indolyl ketones in excellent yield and high enantioselectivity (ee up to 89%). The role of the base was investigated through spectroscopic as well as computational analyses, which suggested that in situ formation of a new chiral (base.[Al(salen)]) complex was operating under our reaction conditions. In particular, a stable cationic [Al(salen)] hexacoordinate trans complex with the additive base and the enone is suggested as being responsible for the stereocontrolled reaction. Finally, detailed monitoring of the reaction course was carried out showing that a conventional FC pathway induced by [Al(salen)Cl] acting as a Lewis acid is operating.     

Statistical experimental design-driven discovery of room-temperature conditions for palladium-catalyzed cyanation of aryl bromides

A combination of Pd₂(dba)₃·CHCl₃ (0.5 mol %) and commercially available, air-stable phosphonium salt [(t-Bu)₃PH]BF₄ (1.4 mol %) in a presence of Zn powder and Zn(CN)₂ as the cyanide source comprises an extremely efficient catalyst system for the cyanation of a diverse array of aryl bromides, at room temperature. This result emerged from an experimental strategy that combines the advantages of parallel, automated experimentation with the design of experiments (DOE) for the effective definition of an optimal set of reaction conditions.