Tetramethylcyclopentadienylselenium derivatives

Bis(1,2,3,4-tetramethylcyclopentadienyl)selane (1) has been prepared by the reaction of tetramethylcyclopentadienyllithium (Cp(t)Li) with selenium bis(diethyldithiocarbamate). Treatment of Cp(t)Li with elemental selenium, followed by air oxidation, led to loss of the allylic hydrogen atom, and formation of the novel tricyclic compound 1,4,5,6,7,10,11,12-octamethyltricyclo[7.3.0.0]-2,8-diselenadodeca-3,5,9,11-tetraene (2). The sulfur analogue of 2 has been obtained by a similar procedure. The X-ray crystal structures of compounds 1 and 2 have been determined, and the molecular geometry observed for has been probed using DFT calculations.     

Structural snapshots of a flexible Cu2P2 core that accommodates the oxidation states Cu(I)Cu(I), Cu1.5Cu1.5, and Cu(II)Cu(II)

The phosphido-bridged dicopper(I) complex {(PPP)Cu}2 has been synthesized and structurally characterized ([PPP]- = bis(2-di-iso-propylphosphinophenyl)phosphide). Cyclic voltammetry of {(PPP)Cu}2 in THF shows fully reversible oxidations at -1.02 V (Cu1.5Cu1.5/CuICuI) and -0.423 V (CuIICuII/Cu1.5Cu1.5). Chemical oxidation of {(PPP)Cu}2 by one electron yields the class III mixed-valence species [{(PPP)Cu}2]+ (EPR, UV-vis). Structural data establish an unexpectedly large change (0.538 A) in the Cu...Cu distance upon oxidation state. Oxidation of {(PPP)Cu}2 by two electrons yields the dication [{(PPP)Cu}2]2+, an antiferromagnetically coupled dicopper(II) complex. Maintenance of a pseudotetrahedral geometry that is midway between a square plane and an ideal tetrahedron at the copper centers, along with a high degree of flexibility at the phosphide hinges, allows for efficient access to CuICuI, Cu1.5Cu1.5, and CuIICuII redox states without the need for ligand exchange, substitution, or redistribution processes.     

Terpyridine Zn(II), Ru(III), and Ir(III) complexes: the relevant role of the nature of the metal ion and of the ancillary ligands on the second-order nonlinear response of terpyridines carrying electron donor or electron acceptor groups

Coordination of 4'-(C6H4-p-X)-2,2':6',2'-terpyridines [X = NO2, NBu2, (E)-CH=CH-C6H4-p-NBu2, (E,E)-(CH=CH)2-C6H4-p-NMe2] to Zn(II), Ru(III), and Ir(III) metal centers induces a significant enhancement of the absolute value of the second-order nonlinear optical (NLO) response of the terpyridine, measured by means of both electric field induced second harmonic generation and solvatochromic methods. By varying the nature of the metal center, the enhanced second-order NLO response shifts from positive to negative. Such a shift is controlled by electronic charge-transfer transitions, such as metal-to-ligand or ligand-to-metal transitions, in addition to the intraligand charge transfer. The enhancement generated by coordination is also controlled by the chelation effect and by fine-tuning of the ancillary ligands.     

Effect of core size on the partition of organic solutes in the monolayer of water-soluble nanoparticles: an ESR investigation

ESR spectroscopy has been used to study the interaction of para-pentylbenzyl hydroxyalkyl nitroxide with the monolayer of water-soluble protected gold clusters having a core diameter ranging from 1.6 to 5.3 nm. The solubilization of the nitroxide probe in the more hydrophobic environment of the monolayer strongly depends on the size of the gold core. In particular, the partition equilibrium constant increases as the nanoparticle diameter decreases. These results have been attributed to the different packing of the chains in the monolayer resulting from the different radius of curvature of the investigated nanoparticles. This represents, to the best of our knowledge, the first report demonstrating that the core size of metallic nanoparticles affects the solvating properties of the protective organic monolayer.     

FTIR spectroscopy study of CO adsorption on Pt-Na-mordenite

Different carbonyls are formed after CO adsorption at ambient temperature on a Pt-Na-mordenite (Pt-Na-MOR) sample. Pt(3+)(CO)(2) dicarbonyls (nu(s) at 2205 cm(-1) and nu(as) at 2167 cm(-1)) are decomposed without formation of monocarbonyls. The respective mixed-ligand species, Pt(3+)((12)CO)((13)CO), formed after (12)CO-(13)CO coadsorption, display bands at 2192 and 2131 cm(-1), in excellent agreement with the theoretically calculated values. Pt(2+)-CO species absorb at 2145 cm(-1) and are not able to accept a second CO molecule. Pt(+)-CO carbonyls are characterized by a band at 2111 cm(-1). Under CO equilibrium pressure, these species are converted into dicarbonyls (nu(s) at 2135 cm(-1) and nu(as) at 2101 cm(-1)). The respective mixed-ligand species, Pt(+)((12)CO)((13)CO), manifest bands at 2123 and 2069 cm(-1), in good agreement again with the theory. Different carbonyls of metallic platinum are observed below 2100 cm(-)(1). In addition, weakly adsorbed CO was registered as Na(+)-CO complexes (2177 and 2165 cm(-1)) and Na(+)-OC-Na(+) species (2138 cm(-1)). It was found that during desorption of CO platinum was reduced, ultimately to metal. However, heating in a NO + O(2) mixture leads to reoxidation of the metal particles and restoration of the initial state of the sample.     

Synthesis and characterization of dinuclear ruthenium complexes covalently linked to Ru(II) tris-bipyridine: an approach to mimics of the donor side of photosystem II

To mimic the electron-donor side of photosystem II (PSII), three trinuclear ruthenium complexes (2, 2a, 2b) were synthesized. In these complexes, a mixed-valent dinuclear Ru2(II,III) moiety with one phenoxy and two acetato bridges is covalently linked to a Ru(II) tris-bipyridine photosensitizer. The properties and photoinduced electron/energy transfer of these complexes were studied. The results show that the Ru2(II,III) moieties in the complexes readily undergo reversible one-electron reduction and one-electron oxidation to give the Ru2(II,III) and Ru2(III,III) states, respectively. This could allow for photooxidation of the sensitizer part with an external acceptor and subsequent electron transfer from the dinuclear ruthenium moiety to regenerate the sensitizer. However, all trinuclear ruthenium complexes have a very short excited-state lifetime, in the range of a few nanoseconds to less than 100 ps. Studies by femtosecond time-resolved techniques suggest that a mixture of intramolecular energy and electron transfer between the dinuclear ruthenium moiety and the excited [Ru(bpy)3]2+ photosensitizer is responsible for the short lifetimes. This problem is overcome by anchoring the complexes with ester- or carboxyl-substituted bipyridine ligands (2a, 2b) to nanocrystalline TiO2, and the desired electron transfer from the excited state of the [Ru(bpy)3]2+ moiety to the conduction band of TiO2 followed by intramolecular electron transfer from the dinuclear Ru2(II,III) moiety to photogenerated Ru(III) was observed. The resulting long-lived Ru2(III,III) state decays on the millisecond timescale.     

Investigation of endoglucanase selectivity on carboxymethyl cellulose by mass spectrometric techniques

The benefits of applying cellulose selective enzymes as analytical tools for chemical structure characterization of cellulose derivatives have been frequently addressed over the years. In a recent study the high selectivity of cellulase Cel45A from Trichoderma reesei (Tr Cel45A) was utilized for relating the chemical structure to the flow properties of carboxymethyl cellulose (CMC). However, in order to take full advantage of the enzymatic hydrolysis the enzyme selectivity on the cellulose substrate must be further investigated. Therefore, the selectivity of Tr Cel45A on CMC was studied by chemical sample preparation of the enzyme products followed by mass spectrometric chemical structure characterization. The results strongly suggest that, in accordance with recent studies, also this highly selective endoglucanase is able to catalyze hydrolysis of glucosidic bonds adjacent to mono-substituted anhydroglucose units (AGUs). Furthermore, the results also indicate that substituents on the nearby AGUs will affect the hydrolysis.     

A Review of Synthetic Polymer Characterization by Pyrolysis–GC–MS

Pyrolysis–GC with mass spectrometry detection (Py–GC–MSD) study of the thermal degradation products of synthetic polymers is reviewed. Due to the high heating speed, accurate temperature reproducibility and a wide temperature range, Py–GC–MSD has been applied successfully for polymer characterization. Introduction of samples using the pyrolysis carrier gas through the split injection port, followed by sub-ambient cryofocusing of the pyrolysis products, has shown to give reproducible chromatograms (pyrograms). One of the advantages of this method is that all compositions of the polymers and additives can be investigated without any pretreatment, providing important compositional and structural information in a simple way. The method is a convenient method for compositional analysis of complex polymer materials. The aim of this review is to describe the kinds of applications for which Py–GC–MSD has been found to be suitable; to present guidelines for method optimization; to survey innovations that have recently been developed or are currently being researched; to point to problems in our understanding of the pyrograms; and to suggest areas in which research efforts might be most effective in realizing the full potential of this technique.