Determination of enterostatin in human cerebrospinal fluid by capillary electrophoresis with laser induced fluorescence detection

A capillary electrophoresis (CE) method with laser induced fluorescence (LIF) detection is described for quantification of enterostatin (Val-Pro-Asp-Pro-Arg), a pentapeptide involved in appetite regulation and insulin secretion. Enterostatin and two other pentapeptides belonging to the enterostatin family (i.e. Ala-Pro-Gly-Pro-Arg and Val-Pro-Gly-Pro-Arg) were well separated from each other. The peptides were fluorescently tagged with naphthalene-2,3- dicarboxaldehyde (NDA) and separated by micellar electrokinetic chromatography (MEKC) in the presence of methanol as an organic modifier. Coupled with LIF detection, the method had a detection limit of 4.8 x 10(-6) M for enterostatin. The relative standard deviation was to be 4.0% from five determinations of enterostatin at 37.2 microM in a human cerebrospinal fluid (CSF) sample. Twenty-three human CSF samples were analyzed. The level of enterostatin ranged from 24 microM to 51 microM with a mean (+/- SEM) value of 41.7 +/- 2.0 microM.     

An evaluation of a new neutron tube (Philips Type 18604) for total body in vivo activation analysis

A 14 MeV neutron generator system with a new sealed tube (Philips 18604) was evaluated for total body in vivo neutron activation analysis (TBIVNAA). The neutron output, angular distribution, rise time, reproducibility of short irradiations and leakage of tritium were investigated. The 18604 tube meets all the requirements of TBIVNAA within its normal operating specification.     

Sparsely substituted chlorins as core constructs in chlorophyll analogue chemistry. I. Synthesis

Five routes to stable chlorins bearing 0 or 1 meso substituents have been investigated, among which reaction of a 9-bromo-1-formyldipyrromethane and 2,3,4,5-tetrahydro-1,3,3-trimethyldipyrrin proved most effective. Application of this route afforded metallochlorins [Cu(II), Zn(II), and Pd(II)] including the chlorin lacking any β-pyrrole and meso substituents.     

Micropatterning chemical oscillations: waves, autofocusing, and symmetry breaking

Arrays of chemical oscillators are micropatterned by Wet Stamping. The technique is used to demonstrate that chemical waves can be initiated and controlled in oscillatory systems and that such waves can give rise to phenomena not observed in excitable media. Interoscillator coupling and synchronization, kinetic autofocusing, and twist-symmetry breaking are a consequence of the dependence of the oscillation phase on the local concentrations of reagents and on systems' geometry. Conditions under which a generic oscillatory system would exhibit such behaviors are determined.     

Rheological properties of nanopowder alumina coated with adsorbed fatty acids

The rheological properties of a nanosized alumina powder coated with fatty acid steric stabilizers of varying chain length were investigated. The storage and loss moduli of the complex modulus were measured to characterize the behavior of the flocculated systems. As chain length increased, there was a transition from an elastic response to fluid behavior. However, the fluid system developed elastic characteristics at relatively low volume fractions of 22%. The length of the steric barrier required to produce the fluid dispersion was estimated to be approximately 2 nm and correlates with attractive interactions on the order of the system thermal energy. Moreover, in the flocculated systems, the storage modulus was found to be higher than reported previously in the literature. These higher values were related to the additional attractive forces due to van der Waals attractions between the hydrocarbon tails of the adsorbed fatty acid layers.     

Selenium and nutrition: The accuracy and variability of the selenium content in commercial supplements

Summary Selenium is a required trace-element that has been found to be protective against serious chronic diseases such as cancer and cardiovascular disease in some, but not all, epidemiological studies using both case-control and intervention designs. As a result, the fraction of the adult U.S. population now taking a daily selenium supplement is steadily increasing. In this study, we analyzed 10 or more replicate Se supplement tablets, from each of 15 different products representing 12 different brand names with most being sampled at two different times separated by approximately 30 months. Two chemical forms, seleno-yeast and selenate were tested in 50, 100 and 200 µg/tablet dosages (seleno-yeast) and 25 and 200 µg/tablet dosages (selenate). Variations in contemporary lots were evaluated at both sampling periods. The Se content provided on the product label is generally understated. One tablet contained 2.5 times more selenium than the stated dose. Selenate supplements are less accurately labeled and more highly variable compared to yeast supplements. One popular multivitamin, labeled at 200 µg/tablet, contained tablets in excess of 300 µg. Many subjects using this supplement will exceed the 400 µg/day tolerable upper limit of intake, recently established, for Se by the Institute of Medicine’s Food and Nutrition Board.     

The Bohlmann-Rahtz route to functionalised pyridine scaffolds and their use in library synthesis

The Bohlmann-Rahtz reaction has been used to prepare 2,3,6-trisubstituted pyridines suitable for use in library synthesis. The synthesis of piperidine substituted nicotinic acid derivative 9 has been optimised and carried out on a large scale to give ca. 500 g of scaffold which was used in the generation of the pyridine library 11.     

Cationic copolymerization of tetrahydrofuran with epoxides. III. Synthesis of block copolymers

Polymerization of various cyclic ethers by BF₃·O(C₂H₅)₂ in the presence of polymeric glycol leads to the formation of hydroxyl terminated block copolymers. Where poly(oxyethylene glycol) is used as the polymeric glycol, fission of the poly(oxyethylene glycol) chain occurs, and block copolymers, containing shorter ethylene oxide unit sequences are obtained. With poly(oxypropylene glycol), on the other hand, the polymer chain remains intact. This may be due to the steric influence of the pendant methyl groups. The cyclic oligomers formed as by-products in the polymerizations are easily removed.     

CeO2担载Cu纳米粒子电催化CO2还原产乙烯：CeO2不同暴露晶面对催化性能的影响

Fossil fuels are expected to be the major source of energy for the next few decades. However, combustion of nonrenewable resources leads to the release of large quantities of CO₂, the primary greenhouse gas. Notably, the concentration of CO₂ in the atmosphere is increasing annually at an astounding rate. Electrochemical CO₂ reduction (ECR) to value-added fuels and chemicals using electricity from intermittent renewable energy sources is a carbon-neutral method to alleviate anthropogenic CO₂ emissions. Despite the steady progress in the selective generation of C₁ products (CO and formic acid), the production of multi-carbon species still suffers from low selectivity and efficiency. As an ECR product, ethylene (C₂H₄) has a higher energy density than do C₁ species and is an important industrial feedstock in high demand. However, the conversion of CO₂ to C₂H₄ is plagued by low productivity and large overpotential, in addition to the severe competing hydrogen evolution reaction (HER) during the ECR. To address these issues, the design and development of advanced electrocatalysts are critical. Here, we demonstrate fine-tuning of ECR to C₂H₄ by taking advantage of the prominent interaction of Cu with shape-controlled CeO₂ nanocrystals, that is, cubes, rods, and octahedra predominantly covered with (100), (110), and (111) surfaces, respectively. We found that the selectivity and activity of the ECR depended strongly on the exposed crystal facets of CeO₂. The overall ECR Faradaic efficiency (FE) over Cu/CeO₂(110) (FE ≈ 56.7%) surpassed that of both Cu/CeO₂(100) (FE ≈ 51.5%) and Cu/CeO₂(111) (FE ≈ 48.4%) in 0.1 mol·L^-1 KHCO₃ solutions with an H-type cell. This was in stark contrast to the exclusive occurrence of the HER over pure carbon paper, CeO₂(100), CeO₂(110), and CeO₂(111). In particular, the FE toward C₂H₄ formation and the partial current density increased in the sequence Cu/CeO₂(111) < Cu/CeO₂(100) < Cu/CeO₂(110) within applied bias potentials from -1.00 to -1.15 V (vs. the reversible hydrogen electrode), reaching 39.1% over Cu/CeO₂(110) at a mild overpotential (1.13 V). The corresponding values for Cu/CeO₂(100) and Cu/CeO₂(111) were FE_C2H4 ≈ 31.8% and FE_C2H4 ≈ 29.6%, respectively. The C₂H₄ selectivity was comparable to that of many reported Cu-based electrocatalysts at similar overpotentials. Furthermore, the FE for C₂H₄ remained stable even after 6 h of continuous electrolysis. The superior ECR activity of Cu/CeO₂(110) to yield C₂H₄ was attributed to the metastable (110) surface, which not only promoted the effective adsorption of CO₂ but also remarkably stabilized Cu⁺, thereby boosting the ECR to produce C₂H₄. This work offers an alternative strategy to enhance the ECR efficiency by crystal facet engineering.     

Synthesis, structure, and complexation of a large 28-mer macrocycle containing two binding sites for either anions or metal ions

The "one-pot" synthesis and characterization of a large 28-mer macrocycle (H(4)L(2)) with oxamido units capable of complexing guest ions through oxygen or nitrogen donor atoms is reported. Single-crystal structure determination of H(8)L(2)(NO(3))(4) and (Cu(2)[H(2)L(2)](H(2)O)(2))(NO(3))(2) demonstrated that the macrocycle contains two sites capable of complexing two nitrate anions or two copper(II) ions, involving a large structural reorganization in the conformation of the macrocyclic framework on coordination of the copper(II) ions when compared to the nitrate. Electrochemical and magnetic susceptibility measurements on the dinuclear Cu(II) complex and the related mononuclear and trinuclear Cu(II) complexes derived from the related 14-mer macrocycle were carried out and illustrate the role of the oxamido groups in mediating metal-metal interaction and delocalization.