Spectrum analysis of U-doped LaBr3 single crystals. Part 1: crystal-field analysis

Single crystals of U³⁺:LaBr₃ were grown by the Bridgman-Stockbarger technique. High-resolution polarized absorption spectra of the crystals were recorded at 4.2 K in the 4000-50,000 cm⁻¹ range. Sixty-four experimental crystal-field energy levels of the U³⁺ ion were fitted to a semiempirical Hamiltonian employing free-ion, one-electron crystal-field as well as two-particle correlation crystal-field (CCF) operators with an r.m.s. deviation of 28 cm⁻¹. The performed analysis of the spectra enabled the determination of crystal-field parameters and assignment of the observed 5f³→5f³ transitions. The effects of selected CCF operators on the splitting of some specific U³⁺ multiplets have been investigated and the obtained values of Hamiltonian parameters are discussed and compared with those reported in previous analyses.     

Thermal and magnetization studies on Heusler alloys

Saturation magnetization measurements as a function of temperature were performed on Cu₂Mn(Al_1–xSn_x) Heusler alloys to study the existence of stable structures. The derivatograph was applied to study the thermal effects.

---

Zusammenfassung Sättigungsmagnetisierungsmessungen als Funktion der Temperatur sowie Derivatographie wurden an Heusler-Legierungen der Formel Cu₂Mn(Al_1–xSn_x) zu Untersuchungen der Existenz einer stabilen Struktur vorgenommen.

---

Résumé Etude de l'existence d'une structure stable dans les alliages de Heusler Cu₂Mn(Al_1–xSn_x), à l'aide d'un Derivatograph et par des mesures de magnétisation à saturation en fonction de la température.

---

XecnepaCu₂Mn(Al_1–xSn_x), , , . .

---

---

Work supported in part by Conselho Nacional de Desenvolvimento Cientifico e Tecnologico and Banco Nacional de Desenvolvimento Economico, Brasil.     

The relationship between the structures of Cu(II) complexes and their chemical transformations: VII

The thermal decompositions of Cu(en)₂(NCS)X. where X^–=Cl^–, Br^–, NO ₃ ^– , BF ₄ ^– and ClO ₄ ^– , have been studied in comparison with the courses of Cu(en)₂(SCN)₂ and Cu(en)₂X₂ decomposition. It is shown that the presence of the thiocyanate group in the complexes Cu(en)₂(NCS)X is the most important factor in the decomposition course, in agreement with the fact that the anions X^– are not coordinated. or are only semicoordinated. Significant differences were found in the courses of thermal decomposition of two forms of Cu(en)₂(NCS)(BF₄) differing in the structure of their coordination polyhedra.

---

Zusammenfassung Die thermische Zersetzung von Cu(en)₂(NCS)X (X=Cl Br, NO₃, BF₄ und ClO₄) wurde untersucht und mit der von Cu(en₂(SCN)₂ und Cu(en)₂X₂ verglichem. Der den Verlauf der Zersetzung entscheidend bestimmende Faktor isi die Anw esenheit der Thiocyanat-Gruppe in den Cu(en)₂(NCS)X-Komplexen, was in Übereinstimmung damit steht,. daß die Anionen X nicht oder nur teilweise koordiniert sind. Es wurden signifikante Unterschiedeim Verlauf der thermischen Zersetzung von zwei sich in der Struktur ihrer Kordinationspolyeder unter-, heidenden Formen von Cu(en)₂(NCS)(BF₄) gefunden.

---

Cu(en)₂(NCS)X (X^–=Cl^–, Br^–, NO ₄ ^– , NO ₃ ^– , BF₄ ClO₄, Cu(en)₂(SCN)₂ Cu(en)₂(X)₂. , Cu(en)₂(NCS)X X Cu(en) (NCS)BF₄ i .

     

Fluorous,chromatography-free Mitsunobu reaction

[formula: see text] The reaction of secondary and primary alcohols with highly fluorinated 3,4,5-tris(5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,12-heptadecafluorododecan- 1-yloxy)benzoic acid in the presence of Ph3P and DIAD in THF at room temperature (fluorous Mitsunobu) resulted in a simple, chromatography-free isolation protocol with excellent yields (83-96%).     

Substituent effects in eight-electron electrocyclic reactions

The main features of transition structures associated with eight-electron electrocyclic reactions have been studied with Density Functional Theory. It is found that conrotatory electrocyclization reaction of (3Z,5Z)-octa-1,3,5,7-tetraenes takes place via M?bius aromatic transition structures of helical conformation. The reaction is completely periselective. In general, transition structures having outward substituents are preferred with respect to the inward transition structures, irrespective of the pi-donor or pi-acceptor character of the substituent. In contrast with four-electron thermal conrotatory electrocyclic reactions, there is no satisfactory correlation between the difference in energy of activation between inward and outward substituents and the Taft resonance sigma(R) parameter.     

Preparation of stable AsBr4+ and I2As-PI3+ salts. Why didn't we succeed to prepare AsI4+ and As2X5+? A combined experimental and theoretical study

In analogy to our successful "PX2+" insertion reactions, an "AsX2+" insertion route was explored to obtain new arsenic halogen cations. Two new salts were prepared: AsBr4+[Al(OR)4]-, starting from AsBr3, Br2 and Ag[Al(OR)4], and I2As-PI3+[Al(OR)]4 from AsI3, PI3 and Ag[Al(OR)4](R=C(CF3)3). The first cation is formally a product of an "AsBr2+" insertion into the Br2 molecule and the latter clearly a "PI2+" insertion into the As-I bond of the AsI3 molecule. Both compounds were characterized by IR and NMR spectroscopy, the first also by its X-ray structure. Reactions of Ag[Al(OR)4] with AsI3 do not lead to ionization and AgI formation but rather lead to a marginally stable Ag(AsI3)2+[Al(OR)]4 salt. Despite many attempts we failed to prepare other PX-cation analogues such as AsI4+, As2X5+ and P4AsX2+(X=Br, I). To explain these negative results the thermodynamics of the formation of EX2+, EX4+ and E2X5+(E = As, P; X = Br, I) was carefully analyzed with MP2/TZVPP calculations and inclusion of entropy and solvation effects. We show that As2Br5+ is in very rapid equilibrium with AsBr2+ and AsBr3(DeltaGo((CH2Cl2))=+30 kJ mol(-1)). The extremely reactive AsBr2+ cation available in the equilibrium accounts for the observed decomposition of the [Al(OR)4]- anion. By contrast, the stability of AsI3 against Ag[Al(OR)4] appears to be kinetic and, if prepared by a suitable route, As2I5+ would be expected to have a stability intermediate between the known P2I5+ and P2Br5+.     

Stereoselective Synthesis of Tetrahydrofuran Spiro‐β‐Lactams by Ru‐Catalyzed Metathesis of 7‐Oxabicyclo[2.2.1]heptenes

A new method for the synthesis of spiro‐β‐lactams tethered to tetrahydrofuran rings is described. The procedure is based on Ru‐catalyzed metathesis sequences with oxanorbornene precursors easily obtained by the Staudinger [2+2] cycloaddition of related imines.     

Immobilization of protein on ferromagnetic Dacron

Ferromagnetic Dacron (polyethyleneterephthalate) is proposed as a matrix to immobilize proteins covalently. Dacron in powder was magnetized by reacting ferrous (Fe+2) and ferric (Fe+3) ions with its hydrazide form at pH 8.3. Ferromagnetic hydrazide Dacron was converted to ferromagnetic azide Dacron and amyloglucosidase (E.C. 3.2.1.3) was covalently bound through the latter group. The catalytic property of the enzyme was preserved (8% of the specific activity estimated for the soluble enzyme) and all the magnetic amyloglucosidase Dacron derivative was recovered by using a magnetic field. No activity was detected in the supernatant.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Identifying acetylated lignin units in non-wood fibers using pyrolysis-gas chromatography/mass spectrometry

A series of non-wood plant fibers, namely kenaf, jute, sisal and abaca, have been analyzed upon pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) of the whole material. The pyrolysis products mainly arise from the carbohydrate and lignin moieties of the fibers. The lignin-derived phenols belonged to the p-hydroxyphenylpropanoid (H), guaiacylpropanoid (G) and syringylpropanoid (S) structures, and showed a high S/G ratio of between 2.0 and 5.4, the highest corresponding to kenaf. Among the lignin-derived phenols released, small amounts of sinapyl and coniferyl acetates (in both cis- and trans-forms) were identified for the first time upon Py-GC/MS of lignocellulosic materials. Acetylation of the sinapyl and coniferyl alcohols was at the gamma-position of the side chain. The release of these alcohols derived from intact acetylated lignin units upon pyrolysis seems to indicate that the native lignin in the fibers selected for this study is at least partially acetylated. Sinapyl (and coniferyl) acetates have recently been suggested to be authentic lignin precursors involved in the polymerization of lignin along with the normal sinapyl and coniferyl alcohols. Py-GC/MS will offer a convenient and rapid tool for analyzing naturally acetylated lignins, as well as to screen plant materials for the presence of acetylated units in lignin.