The Ising version of the t–J model

The t–J model is analysed in the limit of strong anisotropy, where the transverse components of electron spin are neglected. We propose a slave-particle-type approach that is valid, in contradiction to many of the standard approaches, in the low-doping regime and becomes exact for a half-filled system. We describe an effective method that allows to numerically study the system with the no-double-occupancy constraint rigorously taken into account at each lattice site. Then, we use this approach to demonstrate the destruction of the antiferromagnetic order by increasing the doping and formation of Nagaoka polarons in the strong interaction regime.     

Analytical protocol for investigation of zinc speciation in plant tissue

A specific procedure is proposed for investigating the chemical speciation of zinc (Zn) in plant tissues, viz., the extraction of Zn compounds from Plantago lanceolata L. followed by the chromatographic separation and inductively coupled plasma mass spectrometry (ICP-MS) identification of these compounds. In order to separate the Zn compounds, both size-exclusion (SEC) and ionexchange liquid chromatography (IC) were used in direct sequential and reverse sequential modes. In the direct sequential mode, the entire extract undergoes SEC separation and then the individual fractions are injected onto the ion-exchange column. The molecular size distribution is evaluated by SEC coupled on-line to the UV detector. In the reverse sequential mode, the entire extract undergoes the ion-exchange chromatographic separation and then the individual fractions are injected onto the size-exclusion column. The identification of Zn incorporated into the compounds is further performed using ICP-MS. This procedure is particularly useful in speciation studies when identification of the individual components of the element is problematic due to the lack of suitable standard substances, as is the case for Zn compounds. The proposed procedure facilitates assignment of the signals to the individual components of the fractions for both types of chromatography, thus rendering the chemical speciation of Zn possible when the lack of suitable standard substances impedes the identification of individual components.     

Hot Branching Dynamics in a Light‐Harvesting Iron Carbene Complex Revealed by Ultrafast X‐ray Emission Spectroscopy

Iron N‐heterocyclic carbene (NHC) complexes have received a great deal of attention recently because of their growing potential as light sensitizers or photocatalysts. We present a sub‐ps X‐ray spectroscopy study of an Fe^IINHC complex that identifies and quantifies the states involved in the deactivation cascade after light absorption. Excited molecules relax back to the ground state along two pathways: After population of a hot ³MLCT state, from the initially excited ¹MLCT state, 30 % of the molecules undergo ultrafast (150 fs) relaxation to the ³MC state, in competition with vibrational relaxation and cooling to the relaxed ³MLCT state. The relaxed ³MLCT state then decays much more slowly (7.6 ps) to the ³MC state. The ³MC state is rapidly (2.2 ps) deactivated to the ground state. The ⁵MC state is not involved in the deactivation pathway. The ultrafast partial deactivation of the ³MLCT state constitutes a loss channel from the point of view of photochemical efficiency and highlights the necessity to screen transition‐metal complexes for similar ultrafast decays to optimize photochemical performance.     

Pilot-Scale Optimization of Supercritical CO2 Extraction of Dry Paprika Capsicum annuum: Influence of Operational Conditions and Storage on Extract Composition

Supercritical carbon dioxide extraction was used to extract carotenoids from dry paprika Capsicum annuum. Studies regarding the effect of process parameters, including pressure (25–45 MPa), temperature (40–60 °C), and time (10–110 min), were carried out using response surface methodology. It was found that under optimal conditions (pressure of 45 MPa, temperature of 50 °C, and time of 74 min), the extract yield was 10.05%, and the total content of carotenoids in the extract was 4.21%, in good agreement with the predicted values (10.24% and 4.24%, respectively). Composition analysis showed that paprika extract mainly consisted of linoleic acid. There was no significant difference between the fatty acid content of the extracts obtained by SC-CO₂ extraction and n-hexane Soxhlet extraction. For functional purposes, the effect of storage conditions and time on the quality of paprika extract was also specified.     

The Effect of Bio-Synthesized Silver Nanoparticles on Germination,Early Seedling Development,and Metabolome of Wheat (Triticum aestivum L.)

Changes in the metabolome of germinating seeds and seedlings caused by metal nanoparticles are poorly understood. In the present study, the effects of bio-synthesized silver nanoparticles ((Bio)Ag NPs) on grains germination, early seedlings development, and metabolic profiles of roots, coleoptile, and endosperm of wheat were analyzed. Grains germinated well in (Bio)Ag NPs suspensions at the concentration in the range 10–40 mg/L. However, the growth of coleoptile was inhibited by 25%, regardless of (Bio)Ag NPs concentration tested, whereas the growth of roots gradually slowed down along with the increasing concentration of (Bio)Ag NPs. The deleterious effect of Ag NPs on roots was manifested by their shortening, thickening, browning of roots tips, epidermal cell death, progression from apical meristem up to root hairs zone, and the inhibition of root hair development. (Bio)Ag NPs stimulated ROS production in roots and affected the metabolic profiles of all tissues. Roots accumulated sucrose, maltose, 1-kestose, phosphoric acid, and some amino acids (i.e., proline, aspartate/asparagine, hydroxyproline, and branched-chain amino acids). In coleoptile and endosperm, contrary to roots, the concentration of most metabolites decreased. Moreover, coleoptile accumulated galactose. Changes in the concentration of polar metabolites in seedlings revealed the affection of primary metabolism, disturbances in the mobilization of storage materials, and a translocation of sugars and amino acids from the endosperm to growing seedlings.     

Ochratoxin A and 2′R-Ochratoxin A in Selected Foodstuffs and Dietary Risk Assessment

The aim of this study was to estimate the contamination of grain coffee, roasted coffee, instant coffee, and cocoa purchased in local markets with ochratoxin A (OTA) and its isomerization product 2′R-ochratoxin A (2′R-OTA), and to assess risk of dietary exposure to the mycotoxins. OTA and 2′R-OTA content was determined using the HPLC chromatography with immunoaffinity columns dedicated to OTA. OTA levels found in all the tested samples were below the maximum limits specified in the European Commission Regulation EC 1881/2006. Average OTA concentrations calculated for positive samples of grain coffee/roasted coffee/instant coffee/cocoa were 0.94/0.79/3.00/0.95 µg/kg, with the concentration ranges: 0.57–1.97/0.44–2.29/0.40–5.15/0.48–1.97 µg/kg, respectively. Average 2′R-OTA concentrations calculated for positive samples of roasted coffee/instant coffee were 0.90/1.48 µg/kg, with concentration ranges: 0.40–1.26/1.00–2.12 µg/kg, respectively. In turn, diastereomer was not found in any of the tested cocoa samples. Daily intake of both mycotoxins with coffee/cocoa would be below the TDI value even if the consumed coffee/cocoa were contaminated with OTA/2′R-OTA at the highest levels found in this study. Up to now only a few papers on both OTA and 2′R-OTA in roasted food products are available in the literature, and this is the first study in Poland.     

Novel Conjugated s-Tetrazine Derivatives Bearing a 4H-1,2,4-Triazole Scaffold: Synthesis and Luminescent Properties

A series of new symmetrical s-tetrazine derivatives, coupled via a 1,4-phenylene linkage with a 4H-1,2,4-triazole ring, were obtained. The combination of these two rings in an extensively coupled system has significant potential applications, mainly in optoelectronics. The methodology used turned out to be useful regardless of the type of five-membered ring or the nature of the individual substituents. All the products were identified by spectroscopic methods, and the target compounds were tested for luminescent properties. This study showed that all the synthesized highly-conjugated triazoles exhibited luminescence; in particular, one derivative, 3,6-bis(4-(5-(4-methoxyphenyl)-4-phenyl-4H-1,2,4-triazol-3-yl)phenyl)-1,2,4,5-tetrazine (13b), showed strong fluorescence emission and ahigh quantum yield close to 1.     

Barrier Dispersion-Based Coatings Containing Natural and Paraffin Waxes

Petroleum, synthetic, and natural waxes have been used as hydrophobic bases for dispersions intended for use as barrier coatings for packaging paper. Oil-in-water dispersions with alkaline pH were prepared by a two-step homogenization procedure containing paraffin wax, with various characteristics, the Fischer–Tropsch synthesis product or beeswax. The size of the dispersed particles determined by dynamic light scattering depended on the type of hydrophobic base used and was in the range of 350–440 nm. The ability of dispersion particles in aggregation driven by electrostatic attraction, evaluated by Zeta potential analysis by electrophoretic light scattering, was from −26 to −50 mV. Static multiply light scattering was used for 30 days of stability assessment and helped to select the dispersion with a Sarawax SX70 wax base as the most stable. Dispersions were further used for coating the backing of kraft paper by the Meyer rod method. Coated paper with an applied coating of 6 g/m² had very good hydrophobic properties (Cobb60 < 4 g/m²), sufficient strength properties, and air permeation, which enabled its application as a packaging material. The dispersions based on Sarawax SX70 wax were evaluated as the best coating for Mondi ProVantage Kraftliner 125 g/m² backing paper. Good hydrophobic properties and strength properties indicate the possibility of using the SX70-based wax dispersion coating as a replacement for PFAS coatings in some applications.     

Selected local stability problems of channel section flanges made of aluminium alloys

The paper addresses the issue of local buckling of compressed flanges of cold-formed thin-walled channel columns and beams with nonstandard flanges composed of aluminium alloys. The material behaviour follows the Ramberg–Osgood law. It should be noted that the proposed solution may be also applied for other materials, for example: stainless steel, carbon steel. The paper is motivated by an increasing interest in nonstandard cold-formed section shaping in local buckling analysis problems. Furthermore, attention is paid to the impact of material characteristics on buckling stresses in a nonlinear domain. The objective of the paper is to propose a finite element method (FEM) model and a relevant numerical procedure in ABAQUS, complemented by an analytical one. It should be noted that the proposed FEM energetic technique makes it possible to compute accurately the critical buckling stresses. The suggested numerical method is intended to accurately follow the entire structural equilibrium path under an active load in elastic and inelastic ranges. The paper is also focused on correct modelling of interactions between sheets of cross section of a possible contact during buckling analysis. Furthermore, the FEM results are compared with the analytical solution. Numerical examples confirm the validity of the proposed FEM procedures and the closed-form analytical solutions. Finally, a brief research summary is presented and the results are discussed further on.     

Analysis of the temperature dependence of the high-frequency EMR spectra of Mn ions in the lithium-ion battery material LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>

This paper deals with the analysis of the temperature dependence of high-frequency EMR (HF-EMR) spectra due to Mn³⁺ and Mn⁴⁺ ions in the lithium manganese spinel LiMn₂O₄. A range of powder samples obtained by the sol-gel method with calcinations in several temperature ranges were prepared for this study. Based on the initial characterization carried out by a number of techniques, the physicochemical and structural properties of the samples were earlier determined. Independently, temperature magnetization and HF-EMR measurements were carried out. The EMR spectra vary strongly between samples, indicating possible structural or chemical changes. Quantitative analysis of the temperature dependence of the HF-EMR spectra due to Mn³⁺ and Mn⁴⁺ ions in LiMn₂O₄ is presented in this paper. The spectral analysis concerns the line shape, linewidth, intensity and g-factors. Fittings using the Lorentzian spectral shape and, to a certain extent, the Gaussian spectral shape have been carried out in order to parameterize the temperature dependence of the HF-EMR spectra. This parameterization of the HF-EMR experimental data enables a deeper characterization of the samples. Subsequently, a better insight into the role of the Mn³⁺ and Mn⁴⁺ ions in accounting for the characteristics most suitable for application of LiMn₂O₄ as a cathode material may be gained.