Molecular orientation,crystallinity, and flexural modulus correlations in injection molded polypropylene/talc composites

In order to promote better understanding of the structure‐mechanical properties relationships of filled thermoplastic compounds, the molecular orientation and the degree of crystallinity of injection molded talc‐filled isotactic polypropylene (PP) composites were investigated by X‐ray pole figures and wide‐angle X‐ray diffraction (WAXD). The usual orientation of the filler particles, where the plate planes of talc particles are oriented parallel to the surface of injection molding and influence the orientation of the α‐PP crystallites was observed. The PP crystallites show bimodal orientation in which the c‐ and a*‐axes are mixed oriented to the longitudinal direction (LD) and the b‐axis is oriented to the normal direction (ND). It was found that the preferential b‐axis orientation of PP crystallites increases significantly in the presence of talc particles up to 20 wt% in the composites and then levels‐off at higher filler content. WAXD measurements of the degree of crystallinity through the thickness of injection molded PP/talc composites indicated an increasing gradient of PP matrix crystallinity content from the core to the skin layers of the molded plaques. Also, the bulk PP crystallinity content of the composites, as determined by DSC measurements, increased with talc filler concentration. The bulk crystallinity content of PP matrix and the orientation behavior of the matrix PP crystallites and that of the talc particles in composites are influenced by the presence of the filler content and these three composite's microstructure modification factors influence significantly the flexural moduli and the mechanical stiffness anisotropy data (E_LD/E_TD) of the analyzed PP/talc composites. Copyright © 2009 John Wiley & Sons, Ltd.     

Silver(I) complexes of 9-anthracenecarboxylic acid and imidazoles: synthesis, structure and antimicrobial activity

[Ag(2)(9-aca)(2)] (1) (9-acaH = 9-anthracenecarboxylic acid) reacts with a series of imidazoles to give [Ag(imidH)(2.3)(CH(3)CN)(0.7)](9-aca) (3), [Ag(6)(imidH)(4)(9-aca)(6)(MeOH)(2)] (4), {[Ag(1-Me-imid)(2)](2)[Ag(4)(9-aca)(6)]} (5), {[Ag(1-Bu-imid)(2)](2)[Ag(4)(9-aca)(6)]} (6) and [Ag(apim)](9-aca)·H(2)O (7) (imidH = imidazole; 1-Me-imid = 1-methylimidazole; 1-Bu-imid = 1-butylimidazole; apim = 1-(3-aminopropyl)imidazole). The mononuclear complex 3, hexanuclear 4-6, and polymeric 7, were all characterised using X-ray crystallography. While many of the complexes possess excellent in vitro antifungal and antibacterial activities they are, unanimously, more effective against fungal cells. The insect, Galleria mellonella, can survive high doses of the Ag(i) complexes administered in vivo, and a number of the complexes offer significant protection to larvae infected with a lethal dose of pathogenic Candida albicans cells.     

Organocatalyzed Cyclopropanation of α‐Substituted α,β‐Unsaturated Aldehydes: Enantioselective Synthesis of Cyclopropanes Bearing a Chiral Quaternary Center

An enantioselective cyclopropanation of α‐substituted α,β‐unsaturated aldehydes with bromomalonate has been successfully developed through a domino Michael/α‐alkylation strategy. The method allows the efficient formation of cyclopropanes bearing a quaternary carbon stereocenter at the α‐position of the aldehydes by using iminium/enamine catalysis and gives a nice extension on the organocatalytic cyclopropanation of bromomalonate and α,β‐unsaturated aldehydes previously reported by other groups. Very good yields (up to 81 %) and enantioselectivities (up to 97 % ee) have been obtained. The optically active cyclopropane derivatives are of high synthetic interest as useful targets for further elaboration into more complex structures.     

A new triterpene with antinociceptive activity from Maytenus robusta

A new triterpene 3,15-dioxo-21alpha-hydroxy friedelane has been isolated from methanol extract of Maytenus robusta and its structure elucidated on the basis of spectral analysis. Stigmasterol, friedelin, friedelanol and 3,15-dioxo friedelane were also obtained. 3,15-dioxo-21alpha-hydroxy friedelane was analyzed against the writhing test in mice and exhibited potent dose-dependent effects with an ID50 value of 12.5 +/- 2.1 micromol kg(-1) and a maximal inhibition of 85.90%. It was about 10-fold more active than aspirin and paracetamol, used as reference drugs.     

Thermodynamic and dynamic anomalies for a three-dimensional isotropic core-softened potential

Using molecular-dynamics simulations and integral equations (Rogers-Young, Percus-Yevick, and hypernetted chain closures) we investigate the thermodynamics of particles interacting with continuous core-softened intermolecular potential. Dynamic properties are also analyzed by the simulations. We show that, for a chosen shape of the potential, the density, at constant pressure, has a maximum for a certain temperature. The line of temperatures of maximum density (TMD) was determined in the pressure-temperature phase diagram. Similarly the diffusion constant at a constant temperature, D, has a maximum at a density rho(max) and a minimum at a density rho(min) < rho(max). In the pressure-temperature phase diagram the line of extrema in diffusivity is outside of the TMD line. Although this interparticle potential lacks directionality, this is the same behavior observed in simple point charge/extended water.     

Sample preparation methods for subsequent determination of metals and non-metals in crude oil—A review

In this review sample preparation strategies used for crude oil digestion in last ten years are discussed focusing on further metals and non-metals determination. One of the main challenges of proposed methods has been to overcome the difficulty to bring crude oil samples into solution, which should be compatible with analytical techniques used for element determination. On this aspect, this review summarizes the sample preparation methods for metals and non metals determination in crude oil including those based on wet digestion, combustion, emulsification, extraction, sample dilution with organic solvents, among others. Conventional methods related to wet digestion with concentrated acids or combustion are also covered, with special emphasis to closed systems. Trends in sample digestion, such as microwave-assisted digestion using diluted acids combined with high-efficiency decomposition systems are discussed. On the other hand, strategies based on sample dilution in organic solvents and procedures recommended for speciation analysis are reported as well as the use of direct analysis in view of the recent importance for crude oil field. A compilation concerning sample preparation for crude oil provided by official methods as well as certified reference materials available for accuracy evaluation is also presented and discussed.     

Diffusion enhancement in core-softened fluid confined in nanotubes

We study the effect of confinement in the dynamical behavior of a core-softened fluid. The fluid is modeled as a two length scales potential. This potential in the bulk reproduces the anomalous behavior observed in the density and in the diffusion of liquid water. A series of NpT molecular dynamics simulations for this two length scales fluid confined in a nanotube were performed. We obtain that the diffusion coefficient increases with the increase of the nanotube radius for wide channels as expected for normal fluids. However, for narrow channels, the confinement shows an enhancement in the diffusion coefficient when the nanotube radius decreases. This behavior, observed for water, is explained in the framework of the two length scales potential.     

On sparse reflexive generalized inverse

We study sparse generalized inverses $H$ of a rank-$r$ real matrix $A$. We give a construction for reflexive generalized inverses having at most $r^2$ nonzeros. For $r=1$ and for $r=2$ with $A$ nonnegative, we demonstrate how to minimize the (vector) 1-norm over reflexive generalized inverses. For general $r$, we efficiently find reflexive generalized inverses with 1-norm within approximately a factor of $r^2$ of the minimum 1-norm generalized inverse.     

Characterization of the products of aniline peroxydisulfate oligo/polymerization in media with different pH by resonance Raman spectroscopy at 413.1 and 1064 nm excitation wavelengths

The pH–structure correlation of the products of aniline peroxydisulfate reaction was mainly investigated by resonance Raman spectroscopy. The reactions of aniline and ammonium peroxydisulfate were carried out in aqueous solutions of initial pH ranging from 4.9 to 13.2 and monomer/oxidant molar ratio of 4/1. For an initial pH of 4.9, the spectroscopic techniques showed that the emeraldine salt form of polyaniline (PANI–ES) is the main product, corroborating that the usual head‐to‐tail coupling mechanism is taking place. The resonance Raman spectra at 1064 nm exciting wavelength were useful to detect the emeraldine salt as a minor product for reactions at an initial pH of 5.3–11.5. The Raman spectra of the main product of the reaction at initial pH of 13.2 excited at 1064 and 413.1 nm showed new spectral features consistent with 1,4‐Michael‐type adducts of aniline monomers and 1,4‐benzoquinone‐monoimine unit. These compounds and their products of hydrolysis/oxidation are the predominant species for the reaction media of initial pH from 5.3 to 13.2. In order to get PANI with different nanoscale morphologies, a pH value of more than 0 or 1 was used in the aniline polymerization. The spectroscopic data obtained in this work reveal that head‐to‐tail coupling does not occur when aniline reacts at media pH higher than about 5. It is suggested that chemical structures of the products of aniline oxidation by an unusual mechanism are the driving force for the development of assorted morphologies. Copyright © 2011 John Wiley & Sons, Ltd.