Fluorimetric determination of beryllium with pyridoxal-5-phosphate

A simple, rapid and selective method for the determination of beryllium with pyridoxal-5-phosphate has been developed. The system is only fluorescent (lambda(ex) 360, lambda(em) 460 nm) in the presence of a nitrogenous base such as ammonia, ethylenediamine or pyridine, owing to the possible formation of a ternary complex. The calibration graph is linear over the range 8-60 ng ml . The high selectivity of the method permits the determination of beryllium in various types of alloys.     

Variable-angle scanning fluorescence spectrometry for the determination of closely overlapped pesticide mixtures

The application of a program written in BASIC for an IBM/PC interfaced with a commercial spectrofluorimeter enables variable-angle scanning fluorescence spectra to be obtained, without modification of the instrument. The technique is effective for determinations of the components of mixtures of carbaryl, fuberidazol and warfarin, all of which are pesticides with intrinsic fluorescence and closely overlapping profiles. The proposed method permitted simultaneous determinations with RSD of less than 2.5% and recoveries of 99–110%.     

Electrospray ionization quadrupole time-of-flight and matrix-assisted laser desorption/ionization tandem time-of-flight mass spectrometric analyses to solve micro-heterogeneity in post-translationally modified peptides from Phoneutria nigriventer (Aranea, Ctenidae) venom

Previous studies of the fractionated venom of the Brazilian armed spider Phoneutria nigriventer, obtained by gel filtration, have demonstrated the presence of a fraction PhM, a pool of small peptides (up to 2000 Da) that provoke contractions in smooth muscle of guinea pig ileum. Initial attempts to sequence these peptides were largely unsuccessful because of the low purification yield and the fact that the majority seemed to be blocked at their N-termini. In the present work, analysis of this venom fraction by mass spectrometry has revealed the existence of a highly complex mixture of peptides with molecular weights corresponding to those observed for the muscle-active peptides previously described (800-1800 Da). These peptides appear to be a family of isoforms with some particular features. The amino acid sequences of 15 isoforms have been determined by tandem mass spectrometry (MS/MS) using both electrospray ionization quadrupole time-of-flight mass spectrometry (ESI-Q/ToFMS) and matrix-assisted laser desorption/ionization tandem time-of-flight mass spectrometry (MALDI-ToF/ToFMS). These molecules contain post-translational modifications such as proteolysis and C-terminal amidation, which combine to generate additional isoforms. All the isoforms sequenced in this study possess an N-terminal pyroglutamic acid residue. A search for sequence similarities with other peptides in databanks revealed that these peptides are structurally related to the tachykinins, a family of neuro-hormone peptides. The data obtained in this study will be essential for the subsequent steps of this research, the synthesis of these peptides and pharmacological characterization of their biological activity.     

Effect of combining rules for cubic equations of state on the prediction of double retrograde vaporization

In this work, the phenomenon of double retrograde vaporization (DRV) is simulated using the Peng–Robinson equation of state with the classical mixing rules and several combining rules for the cross-energy and cross-co-volume parameters. The binary interaction parameters are set equal to zero in all cases, i.e., the calculations are entirely predictive. An interesting conclusion is that the predictions using the classical combining rules (geometric mean rule for a_ij and arithmetic mean rule for b_ij) provide the best agreement with the experimental data for all the systems tested: methane + n-butane, methane + n-pentane, ethane + limonene, and ethane + linalool. Another interesting observation is that several combining rules for b_ij, other than the arithmetic mean rule, predict the existence of three phases in equilibrium in a very narrow temperature range close to the critical temperature of methane in the methane + n-pentane system, even though, literature data indicates that n-hexane is the first n-alkane to present partial liquid phase immiscibility with methane.     

Identification of the main by-products of the developing agent N-hydroxyethyl-N-ethyl-3-methyl-p-phenylenediamine in photographic effluents by liquid chromatography/mass spectrometry

N-Hydroxyethyl-N-ethyl-3-methyl-p-phenylenediamine (CD(4)) is commonly used as a developing agent in color photographic processes. The main by-products formed in developer baths used in the process were separated and identified by liquid chromatography/electron ionization mass spectrometry (LC/EI-MS) and liquid chromatography/atmospheric pressure ionization mass spectrometry (LC/API-MS). A number of side reactions, in addition to the main reactions involved in the developing process, were found to occur. Such side reactions involved in the formation of CD(4) by-products included oxidation, hydroxylation, sulfonation and the formation of coupling products. A reaction pathway for the degradation of CD(4) based on the nature of the by-products identified is proposed and discussed.     

New considerations about the separation and quantification of antimony species by ion chromatography-hydride generation atomic fluorescence spectrometry

A new method for the speciation of inorganic [Sb(III) and Sb(V)] and organic (Me3SbCl2) antimony species by using a polystyrene-divinylbenzene-based anion-exchange HPLC column (Hamilton PRP-X100) coupled to hydride generation atomic fluorescence spectrometry (HG-AFS) is presented. Several mobile phases were tested for the baseline separation of these three antimony species, investigating in detail experimental parameters such as concentration and pH. The best efficiency and resolution was achieved by using a gradient elution between diammonium tartrate 250 mmol l(-1) pH 5.5 (A) and KOH 20 mmol l(-1) pH 12 (B). The gradient programme used was 100% B for 1.5 min, decreasing to 0% B in 0.1 min and maintained the elution with 100% A for 5.5 min. Analysis time was less than 7 min. Equilibration of the column with the complexing mobile phase was found to be critical in order to avoid Sb(III) double peak formation. Dilution in diammonium tartrate medium was necessary in order to avoid Sb(III) oxidation at microg l(-1) concentration level. Detection limits of 0.06 microg l(-1) for Sb(V), 0.09 microg l(-1) for Me3SbCl2 and 0.04 microg l(-1) for Sb(III) as well as repeatability and reproducibility better than 5% R.S.D. (n = 10) and 9% R.S.D. (n = 30) (for 1 and 5 microg l(-1) of Sb(V) and Sb(III) and 5 and 10 microg l(-1) of Me3SbCl2) were obtained. Accuracy and recovery studies were carried out by analysing one river freshwater sample and two water certified reference materials. The proposed methodology can be considered reliable and straightforward for antimony speciation in fresh water samples.     

Excess enthalpies of ethylbenzene + alkane systems at 25°C. An interpretation in terms of the Prigogine-Flory-Patterson model

The molar excess enthalpies for the ethylbenzene + n-decane and ethylbenzene + n-tetradecane systems have been measured at 25°C over the complete concentration range. These results and others from the literature for alkanes + ethylbenzene, and alkanes + toluene have been discussed in terms of the Prigogine-Flory-Patterson theory.     

Different strategies to assess Cu and Pb mobilization in polluted river sediments

Summary For studying the mechanisms of trace metal mobilization in sediments several strategies have been employed, such as single extraction, sequential extractions, ion exchange, or progressive acidification. Several authors assert that sequential extraction is the best option. In this study two procedures are used in order to assess the mobility of copper and lead in heavily polluted river sediments: sequential extraction using a modified Tessier procedure, and progressive acidification, using an automated method. Six heavily polluted sediment samples are studied by applying the two procedures. The amount of metal released at different pH-values (pH 5 and pH 2) is compared with the resulting distribution when the sequential extraction procedure is applied. The information obtained from the two different approaches is discussed. For both metals a different behaviour is observed when applying each of the two procedures. Thus, copper is more easily released than lead when progressive acidification is followed, whereas an inverse situation is observed when sequential extraction is applied.     

Doublet instability and the molecular structure of AlO2

The possible C_s, C_2v, and C_∞v structures of AlO₂ corresponding to the two lowest electronic states which dissociate into the neutral Al(²P) and O₂(³Σ_g^?) fragments have been investigated at the ab initio self-consistent field (SCF) and CI levels using nonempirical pseudopotentials. The most stable structure corresponds to a C_2v symmetry in the ²A₂ electronic state. However, this structure presents the three-center three-electron Hartree-Fock instability and CASSCF calculations were necessary to unequivocally characterize it as true minimum. Moreover, only another stable structure, of C_2v geometry, was found to be a minimum, corresponding to a low-lying excited state of ²A₁ symmetry. The optimized C_∞v structures were not minima on the corresponding potential energy surfaces and no evidence of any stable C_s structure was found. Calculating values are compared with the different experimental data obtained from the reaction of Al and O₂ in frozen gas inert matrices.     

Monolayers of hydrogen-bonded polymer blends at the air–water interface: poly(vinylacetate)+poly (4-hydroxystyrene)

 The surface pressure (Π) vs surface concentration (Γ_s) curves of the hydrogen-bonded polymer blend poly(vinylacetate)+ poly(4-hydro-xystyrene) (PVAc+P4HS) have been measured at 25 °C onto a water subphase at pH=2.0. While PVAc forms extended monolayers, and the free surface of water is found to be a good solvent for it, P4HS forms compressed monolayers, and the surface is a near Θ-type solvent for it. PVAc and P4HS form miscible non-ideal monolayers until near the collapse pressure through the whole concentration range. The composition dependence of the Π–Γ_s curves is rather complex. Contrary to what might be expected, the addition of PVAc to the blend does not reduce the rigidity of the monolayer until its weight fraction is larger than 0.5. The compressibility data of the P4HS-rich monolayers suggest the existence of a second maximum at high surface coverages, a result already observed in some polysiloxanes. Received: 11 March 1998 Accepted: 7 May 1998