Characterization of sugarcane bagasse by autofluorescence microscopy

The spatial distribution of chemical compounds in sugarcane bagasse is an important issue in its use as a raw material for second generation ethanol production from cellulose hydrolysis. Lignocellulosic materials including whole bagasse, fiber, pith, and respective samples obtained after chemical bleaching were investigated using confocal fluorescence microscopy and spectroscopy with one and two-photon excitation. Autofluorescence from unbleached samples revealed that emission from fiber walls containing the lignin fraction was longitudinally oriented. After bleaching treatment, the oriented emission was partially disrupted. Autofluorescence from bleached samples with a residual lignin content of about 1 % was ascribed to improved dispersion of remaining fluorophores throughout the samples inducing a concomitant reduction of fluorescence self-quenching in the samples. The combination of autofluorescence images with spectral emission and lifetime measurements provides a tool for microscopic characterization of natural bagasse samples. Moreover, the technique allows monitoring bleaching processes related to lignin removal.     

Mechanistic aspects of the comparative oscillatory electrochemical oxidation of formic acid and methanol on platinum electrode

Journal of Solid State Electrochemistry - The characteristics of the electrochemical oscillations that emerge along the catalytic oxidation of small organic molecules critically depend on the...     

Evaluation of the cytotoxicity on breast cancer cell of extracts and compounds isolated from Hyptis pectinata (L.) poit

Abstract

Hyptis pectinata is a herb popularly used in Brazil for the treatment of inflammations, pain, bacterial infections and cancer. In the present study, inflorescences (MPIn), leaves (MPL), branches (MPB), root (MPR) extracts and three compounds isolated from MPIn were assayed against breast tumor cell lines. The structures of the three compounds (pectinolide J, hyptolide and pectinolide E) were determined by means of spectroscopic analysis. Pectinolide J was isolated for the first time. The MPIn, MPL and MPR exhibited specific antiproliferative activity on tumor cell lines when compared to normal cell lines with IC₅₀ of 52.01?±?0.64, 45.91?±?0.02?μg/mL and 82.84?±?0.03?μg/mL, respectively. Although the isolated substances did not present good antiproliferative activity, when the three were associated, a greater biological effect was observed, suggesting a synergistic effect. Hyptolide (5.6?±?0.4?μg/mL) showed IC₅₀ sufficiently low to be considered as a drug prototype.     

Simulation of Organic Liquid Product Deoxygenation through Multistage Countercurrent Absorber/Stripping Using CO2 as Solvent with Aspen-HYSYS: Process Modeling and Simulation

In this work, the deoxygenation of organic liquid products (OLP) obtained through the thermal catalytic cracking of palm oil at 450 °C, 1.0 atmosphere, with 10% (wt.) Na₂CO₃ as a catalyst, in multistage countercurrent absorber columns using supercritical carbon dioxide (SC-CO₂) as a solvent, with an Aspen-HYSYS process simulator, was systematically investigated. In a previous study, the thermodynamic data basis and EOS modeling necessary to simulate the deoxygenation of OLP was presented. This work addresses a new flowsheet, consisting of 03 absorber columns, 10 expansions valves, 10 flash drums, 08 heat exchanges, 01 pressure pump, and 02 make-ups of CO₂, aiming to improve the deacidification of OLP. The simulation was performed at 333 K, 140 bar, and (S/F) = 17; 350 K, 140 bar, and (S/F) = 38; 333 K, 140 bar, and (S/F) = 25. The simulation shows that 81.49% of OLP could be recovered and that the concentrations of hydrocarbons in the extracts of absorber-01 and absorber-02 were 96.95 and 92.78% (wt.) on a solvent-free basis, while the bottom stream of absorber-03 was enriched in oxygenated compounds with concentrations of up to 32.66% (wt.) on a solvent-free basis, showing that the organic liquid products (OLP) were deacidified and SC-CO₂ was able to deacidify the OLP and obtain fractions with lower olefin contents. The best deacidifying condition was obtained at 333 K, 140 bar, and (S/F) = 17.     

4-Cyano-2-oxo-1,2,4-oxadiazolo[2,3-a]quinoxaline 5-N-oxides. New synthetic method and reaction with alcohols. Potential cytotoxic activity

Several quinoxaline 1,4-di-N-oxides have been shown to be efficient and selective cytotoxins for hypoxic cells. We present now a series of 4-cyano-2-oxo-1,2,4-oxadiazolo[2,3-a]quinoxaline 5-N-oxides 2a-2k . They were prepared starting from 3-amino-2-quinoxalinecarbonitrile 1,4-di-N-oxides 1a-1k and 2-chloroethyl isocyanate in dry dioxane at 100–110°. A reaction mechanism is proposed. The treatment of 1a with phenyl isocyanate afforded 2a . Reaction of 2c with silica gel yielded 1c . Compounds 2a-2g were heated in the presence of ethanol and 2-propanol giving the corresponding carbamates 3a-3g and 4a-4g . Compound 2d was already obtained by heating a mixture of 1d and ethyl chloroformiate. Compound 2b was prepared when the carbamate 3b was heated at 150°. Quinoxalines were tested as cytotoxic agents both in oxic and hypoxic cells. The most interesting compounds were 3g and 4g .     

Iboga Inspired N-Indolylethyl-Substituted Isoquinuclidines as a Bioactive Scaffold: Chemoenzymatic Synthesis and Characterization as GDNF Releasers and Antitrypanosoma Agents

The first stage of the drug discovery process involves the identification of small compounds with biological activity. Iboga alkaloids are monoterpene indole alkaloids (MIAs) containing a fused isoquinuclidine-tetrahydroazepine ring. Both the natural products and the iboga-inspired synthetic analogs have shown a wide variety of biological activities. Herein, we describe the chemoenzymatic preparation of a small library of novel N-indolylethyl-substituted isoquinuclidines as iboga-inspired compounds, using toluene as a starting material and an imine Diels–Alder reaction as the key step in the synthesis. The new iboga series was investigated for its potential to promote the release of glial cell line-derived neurotrophic factor (GDNF) by C6 glioma cells, and to inhibit the growth of infective trypanosomes. GDNF is a neurotrophic factor widely recognized by its crucial role in development, survival, maintenance, and protection of dopaminergic neuronal circuitries affected in several neurological and psychiatric pathologies. Four compounds of the series showed promising activity as GDNF releasers, and a leading structure (compound 11) was identified for further studies. The same four compounds impaired the growth of bloodstream Trypanosoma brucei brucei (EC₅₀ 1–8 μM) and two of them (compounds 6 and 14) showed a good selectivity index.     

Chondroitin Sulfate Protects the Liver in an Experimental Model of Extra-Hepatic Cholestasis Induced by Common Bile Duct Ligation

During liver fibrogenesis, there is an imbalance between regeneration and wound healing. The current treatment is the withdrawal of the causing agent; thus, investigation of new and effective treatments is important. Studies have highlighted the action of chondroitin sulfate (CS) in different cells; thus, our aim was to analyze its effect on an experimental model of bile duct ligation (BDL). Adult Wistar rats were subjected to BDL and treated with CS for 7, 14, 21, or 28 days intraperitoneally. We performed histomorphometric analyses on Picrosirius-stained liver sections. Cell death was analyzed according to caspase-3 and cathepsin B activity and using a TUNEL assay. Regeneration was evaluated using PCNA immunohistochemistry. BDL led to increased collagen content with corresponding decreased liver parenchyma. CS treatment reduced total collagen and increased parenchyma content after 21 and 28 days. The treatment also promoted changes in the hepatic collagen type III/I ratio. Furthermore, it was observed that CS treatment reduced caspase-3 activity and the percentage of TUNEL-positive cells after 14 days and cathepsin B activity only after 28 days. The regeneration increased after 14, 21, and 28 days of CS treatment. In conclusion, our study showed a promising hepatoprotective action of CS in fibrogenesis induced by BDL.     

Electrospray ionization mass spectrometry and partial least squares discriminant analysis applied to the quality control of olive oil

Direct infusion electrospray ionization mass spectrometry in the positive ion mode [ESI(+)‐MS] is used to obtain fingerprints of aqueous–methanolic extracts of two types of olive oils, extra virgin (EV) and ordinary (OR), as well as of samples of EV olive oil adulterated by the addition of OR olive oil and other edible oils: corn (CO), sunflower (SF), soybean (SO) and canola (CA). The MS data is treated by the partial least squares discriminant analysis (PLS‐DA) protocol aiming at discriminating the above‐mentioned classes formed by the genuine olive oils, EV (1) and OR (2), as well as the EV adulterated samples, i.e. EV/SO (3), EV/CO (4), EV/SF (5), EV/CA (6) and EV/OR (7). The PLS‐DA model employed is built with 190 and 70 samples for the training and test sets, respectively. For all classes (1–7), EV and OR olive oils as well as the adulterated samples (in a proportion varying from 0.5 to 20.0% w/w) are properly classified. The developed methodology required no ions identification and demonstrated to be fast, as each measurement lasted about 3 min including the extraction step and MS analysis, and reliable, because high sensitivities (rate of true positives) and specificities (rate of true negatives) were achieved. Finally, it can be envisaged that this approach has potential to be applied in quality control of EV olive oils. Copyright © 2013 John Wiley & Sons, Ltd.     

A comparative study of calibration transfer methods for determination of gasoline quality parameters in three different near infrared spectrometers

This work presents a comparative study of calibration transfer among three near infrared spectrometers for determination of naphthenes and RON (Research Octane Number) in gasoline. Seven transfer methods are compared: direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), reverse standardization (RS), piecewise reverse standardization (PRS), slope and bias correction (SBC) and model updating (MU). Two pre-treatment procedures, namely standard normal variate (SNV) and multiplicative scatter correction (MSC), are also investigated. The choice of an appropriate number of transfer samples for each technique, as well as the effect of window size in PDS/PRS and OSC components, are discussed. A broad set of gasoline samples representative of the Northeastern states of Brazil is employed in the investigation. The results show that the use of calibration transfer yields prediction errors comparable to those obtained with complete recalibration of the secondary instrument. Overall, the results point to RS as the best method for the analytical problem under consideration. When storage and/or physical transportation of transfer samples are impractical, MU is more appropriate. The comprehensive investigation carried out in the present work will be of value for practitioners involved in networks of fuel monitoring.