Study of reaction processes by in-line near-infrared spectroscopy in combination with multivariate curve resolution: Esterification of myristic acid with isopropanol

The acid-catalysed esterification of myristic acid with isopropanol was studied by using near-infrared spectroscopy (NIR) in combination with soft-modeling curve resolution (MCR) methodology with a view to establishing the effect of experimental variables on the reaction kinetics. The reaction was conducted at temperatures above the boiling point of the alcohol, with continuous addition of an isopropanol/water mixture to the reactor. Spectral and concentration profiles were determined by applying soft-modeling curve resolution methodology to a column-wise augmented data matrix containing the spectra for the pure components. MCR profiles were compared with reference values and found to depart from then by less than 3% as %RSE for concentrations and to exhibit correlation above 0.999 for spectra.The reaction kinetics as estimated from the concentration profiles was found to be pseudo-first-order. Also, the pseudo-first-order rate constant was found to depend on the flow-rate of the isopropanol/water mixture and its water content; although the constant decreased with increase in the proportion of water, a content of ca. 15% could be used without important retarding effects on the kinetics. The proposed NIR-MCR method allows the rate constant and the influence of the initial water content to be determined with a view to minimizing consumption of the raw materials and optimizing the experimental conditions.     

Voltammetric behavior of zaleplon and its differential pulse polarographic determination in capsules

In this work both the electrochemical behavior and the analysis of the hypnotic pyrazolopyrimidine derivative zaleplon were studied. Zaleplon in ethanol-0.1M Britton Robinson buffer solution (30-70) showed 2 irreversible, well-defined cathodic responses in the pH range of 2-12 using differential pulse polarography (DPP), tast polarography, and cyclic voltammetry. From chronocoulometric studies, it was possible to conclude that one electron was transferred in each reduction peak or wave. For analytical purposes, the DPP technique working at pH 4.5 for peak I was selected, which exhibited adequate repeatability, reproducibility, and selectivity. The recovery was 99.97 +/- 1.52%, and the detection and quantitation limits were 5.13 x 10(-7)M and 1.11 x 10(-6)M, respectively. The DPP method was applied successfully to the individual assay of capsules in order to verify the content uniformity of zaleplon. Treatment of the sample is not required because the excipients do not interfere, the method is not time consuming, and it is less expensive than column liquid chromatography.     

Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.

     

What if Ω ≠ 2q?

We discuss various possible scenarios where 2q, where stands for the density parameter andq for the deceleration parameter. We further estimate the corrections necessary when a variable cosmological constant is considered in the theory.     

The Effect of Auxiliary Nitrogenated Linkers on the Design of New Cadmium-Based Coordination Polymers as Sensors for the Detection of Explosive Materials

Three new cadmium-based coordination polymers, denoted [Cd(hfipbb)(4,4’-bipy)] ( CdPF-1 ), [Cd(hfipbb)(2,2’-bipy)] ( CdPF-2 ), and [Cd(hfipbb)(1,10-phen)] ( CdPF-3 ), have been hydrothermally synthesized by using the well-known V-shaped organic linker 4,4’-(hexafluoroisopropylidene)bis(benzoic acid) (H₂hfipbb), together with different nitrogenated auxiliary linkers. Considering the d¹⁰ configuration of the transition metal selected, the luminescent properties for these CdPF-n materials were explored, finding that materials CdPF-2 and CdPF-3 act as excellent sensors in the detection of explosive nitro aromatic compounds. The photoluminescence properties of CdPF-2 and CdPF-3 revealed that significant and sensitive fluorescence quenching was observed toward NP (nitrophenol) for CdPF-2 and PA (picric acid) for CdPF-3 in MeOH suspensions.     

Mathematical Modeling of Poly[styrene-co-(ethylene glycol dimethacrylate)] Sulfonation

Kinetics and Catalysis - The production of sulfonated resins is of great interest to be applied in different industrial processes such as esterification, etherification, biodiesel production and...     

Uranium-bearing francolites present in organic-rich limestones of NW Greece: a preliminary study using synchrotron radiation and fission track techniques

Synchrotron radiation techniques (μ-XRF and μ-XANES) were applied to the study of organic-rich phosphatized limestones of NW Greece (Epirus). The results revealed uranium accumulation in areas of the material containing, among others, carbonate apatite (francolite) and organic matter. The UL ₃-edge of μ-XANES spectra showed that uranium was present in tetravalent form. U-bearing francolite crystals were separated from the rock and characterized by Raman spectroscopy and microprobe. The analysis of the crystals also indicated the presence of sodium and sulfur. The uranium presence in the crystals was also visualized, after neutron irradiation and etching, by the observation of the fission tracks.