Electrochemical Assay to Quantify the Hydroxyl Radical Scavenging Activity of Medicinal Plant Extracts

A new electrochemical assay has been developed which is based on quantifying the attack of OH^. radicals on a self‐assembled thiol monolayer on electrodes in the presence and absence of antioxidants. The OH^. radicals were produced in Fenton solutions. The radical scavengers diminish the concentration of the OH^. radicals in the Fenton solution, and the extent of thiol layer destruction is monitored with the help of a redox probe in solution, the signal of which is only generated at SAM‐free electrode surface. The results of the electrochemical assay were compared with those of the standard DPPH^. assay. In case of each plant extract, an excellent linear correlation was observed between the radical scavenging activity and the concentration of plant extracts; however, the scavenging properties of different plants strongly differ in the electrochemical and the DPPH^. assay. Since the proposed new method probes the reactivity of radical scavengers towards OH^., one of the most important reactive oxygen radicals in tissues, it is supposed to provide much more relevant information than the DPPH^. or other assays.     

Withanolides from Aureliana fasciculata var. fasciculata

In the first phytochemical study of the Aureliana genus (Solanaceae), two new withanolides, 1 and 2 , together with two known sterols, were isolated from the MeOH extract of the leaves of Aureliana fasciculata var. fasciculata. The structures were established as (4S,22R)‐16α‐acetoxy‐5β,6β‐epoxy‐4β,17α‐dihydroxy‐1‐oxowitha‐2,24‐dienolide (aurelianolide A) and (4S,22R)‐16α‐acetoxy‐4β,17α‐dihydroxy‐1‐oxowitha‐2,5,24‐trienolide (aurelianolide B). The new compounds possessed the unusual 16α,17α‐dioxygenated group and were fully characterized by spectroscopic techniques, including ¹H‐ and ¹³C‐NMR (DEPT), as well as 2D‐NMR (HMBC, HMQC, ¹H,¹H‐COSY, NOESY) experiments, and HR‐MS.     

Nitric oxide-dependent pigment migration induced by ultraviolet radiation in retinal pigment cells of the crab Neohelice granulata

The purpose of this study was to verify the occurrence of pigment dispersion in retinal pigment cells exposed to UVA and UVB radiation, and to investigate the possible participation of a nitric oxide (NO) pathway. Retinal pigment cells from Neohelice granulata were obtained by cellular dissociation. Cells were analyzed for 30 min in the dark (control) and then exposed to 1.1 and 3.3 J cm⁻² UVA, 0.07 and 0.9 J cm⁻² UVB, 20 n m β-PDH (pigment dispersing hormone) or 10 μ m SIN-1 (NO donor). Histological analyses were performed to verify the UV effect in vivo . Cultured cells were exposed to 250 μ m L-NAME (NO synthase blocker) and afterwards were treated with UVA, UVB or β-PDH. The retinal cells in culture displayed significant pigment dispersion in response to UVA, UVB and β-PDH. The same responses to UVA and UVB were observed in vivo . SIN-1 did not induce pigment dispersion in the cell cultures. l-NAME significantly decreased the pigment dispersion induced by UVA and UVB but not by β-PDH. All retinal cells showed an immunopositive reaction against neuronal nitric oxide synthases. Therefore, UVA and UVB radiation are capable of inducing pigment dispersion in retinal pigment cells of Neohelice granulata and this dispersion may be nitric oxide synthase dependent.     

Preparation of the Ca–diclofenac complex in solid state

Two ONNO type naphtaldehyde derivative Schiff base compounds were reduced and two symmetric phenol-amine ligands containing naphthalene groups were obtained; bis-N,N′[(2-hydroxy-1-naphtyl) methyl]-1,3-propanediamine (NAFL^H) and bis-N,N′[(2-hydroxy-1-naphtyl) methyl]-2,2′-dimetyhyl-1,3-propanediamine (NAFLDM^H). Homotrinuclear Ni(II) complexes of these ligands were prepared. The solid-state molecular structures of representative nickel complex of NAFLDM^H were determined using single crystal X-ray diffraction analysis. The terminal Ni(II) ions were found to be situated in between the donor atoms of the organic ligand. The central Ni(II) ion was observed to be bonded via two different μ-bridges. The phenolic oxygens and carboxylate ion were seen to form two different μ-bridges. TG analysis proved that the compounds have different thermal characteristics than those cited in literature. The complexes showed extreme exothermic degradation reactions in inert atmosphere. The complexes are ruptured with a two stepped exothermic reaction which appears huge heat over 300 °C. The heat appeared in O₂ atmosphere is observed to be higher than the heat appeared in inert atmosphere. Revealed heat is observed to be higher than the conventional explosive materials.     

On the relationships between molecular conformations and intermolecular contacts toward crystal self-assembly of mono-, di-, tri-, and tetra-oxygenated xanthone derivatives

Oxygenated xanthones have been extensively investigated over the years, but there are few reports concerning their crystal structure. Our chemical investigations of Brazilian plants resulted in the isolation of four natural products named 1-hydroxyxanthone (I), 1-hydroxy-7-methoxyxanthone (II), 1,5-dihydroxy-3-methoxyxanthone (III), and 1,7-dihydroxy-3,8-dimethoxyxanthone (IV). The structures of these compounds were established on the basis of single crystal X-ray diffraction. The xanthone nucleus conformation is essentially planar with the substituents adopting the orientations less sterically hindered. In addition, classical intermolecular hydrogen bonds (O–H···O) present in III and IV give rise to infinite ribbons. However, the xanthone I does not present any intermolecular hydrogen bonds, meanwhile the xanthone II presents only a non-classical one (C–H···O). The crystal packing of all xanthone structures is also stabilized by π–π interactions. The fingerprint plots, derived from the Hirshfeld surfaces, exhibited significant features of each crystal structures.     

Intrachain energy migration to weak charge-transfer state in polyfluorene end-capped with naphthalimide derivative

Polyfluorene end-capped with N-(2-benzothiazole)-1,8-naphthalimide (PF-BNI) is a highly fluorescent material with fluorescence emission modulated by solvent polarity. Its low energy excited state is assigned as a mixed configuration state between the singlet S(1) of the fluorene backbone (F) with the charge transfer (CT) of the end group BNI. The triexponential fluorescence decays of PF-BNI were associated with fast energy migration to form an intrachain charge-transfer (ICCT) state, polyfluorene backbone decay, and ICCT deactivation. Time-resolved fluorescence anisotropy exhibited biexponential relaxation with a fast component of 12-16 ps in addition to a slow one in the range 0.8-1.4 ns depending on the solvent, showing that depolarization occurs from two different processes: energy migration to form the ICCT state and slow rotational diffusion motion of end segments at a longer time. Results from femtosecond transient absorption measurements agreed with anisotropy decay and showed a decay component of about 16 ps at 605 nm in PF-BNI ascribed to the conversion of S(1) to the ICCT excited state. From the ratio of asymptotic and initial amplitudes of the transient absorption measurement, the efficiency of intrachain ICCT formation is estimated in 0.5, which means that, on average, half of the excited state formed in a BNI-(F)(n)-BNI chain with n = 32 is converted to its low energy intrachain charge-transfer (ICCT) state.     

Synthesis and reactivity of η-tetramethylcyclopentadienyl-propenyl rhenium complexes: Molecular structure of [(η:η-C5Me4CH2CHCH2)Re(CO)2]

The fulvene complexes [(η⁶-C₅Me₄CH₂)Re(CO)₂(R)] (1a, RI; 1b, RC₆F₅) react at the exocyclic methylene carbon with a vinylmagnesium bromide solution to produce the anionic species [(η⁵-C₅Me₄CH₂CHCH₂)Re(CO)₂(R)]⁻. Protonation with HCl at 0 °C produces the hydride complexes [trans-(η⁵-C₅Me₄CH₂CHCH₂)Re(CO)₂(R)(H)] (2a, RI; 2b, RC₆F₅). Thermolysis of an hexane solution of the iodo-hydride (2a) under a CO atmosphere yields the complex [(η⁵-C₅Me₄CH₂CHCH₂)Re(CO)₃] (3) and [Re(CO)₅I] as by-product. Thermolysis of 2b produced three new products, mainly the chelated complex [(η⁵:η²-C₅Me₄CH₂CHCH₂)Re(CO)₂] (4) and complex 3, with a non-coordinated olefin group, in moderated yield, and traces of [Re(CO)₅(C₆F₅)]. Thermolysis of an hexane solution of 2 in presence of an excess of PMe₃, afforded the phosphine derivative [(η⁵-C₅Me₄CH₂CHCH₂)Re(CO)₂(PMe₃)] (5). All the complexes were characterized by IR, ¹H, ¹³C and ³¹P NMR spectroscopies and mass spectrometry. The molecular structure of 4 has also been determined. The molecule exhibits a formal three-legged piano-stool structure, with two CO groups, and the third position corresponding to the η²-coordination of the propenyl side arm of the η⁵-C₅Me₄ ring.     

Kinetics of autocatalytic acid hydrolysis of cellulose with crystalline and amorphous fractions

The acid hydrolysis of cellulose with crystalline and amorphous fractions is analyzed on the basis of autocatalytic model with a positive feedback of acid production from the degraded biopolymer. In the condition of low acid rate production compared with hydrolysis rate, both fraction of cellulose decrease exponentially with linear and cubic time dependence, and the normalized number of scissions per cellulose chain follows a sigmoid behavior with reaction time. The model predicts that self generated acidic compounds from cellulose accelerate the degradation of the biopolymer. However, if the acidic compounds produced are volatile species, then their release under low pressure will reduce the global rate of degradation of cellulose toward its intrinsic rate value determined by the residual acid catalyst present in the starting material.     

Modeling and analysis of laminate composite plates with embedded active-passive piezoelectric networks

The objective of this work is to present the finite element modeling of laminate composite plates with embedded piezoelectric patches or layers that are then connected to active-passive resonant shunt circuits, composed of resistance, inductance and voltage source. Applications to passive vibration control and active control authority enhancement are also presented and discussed. The finite element model is based on an equivalent single layer theory combined with a third-order shear deformation theory. A stress-voltage electromechanical model is considered for the piezoelectric materials fully coupled to the electrical circuits. To this end, the electrical circuit equations are also included in the variational formulation. Hence, conservation of charge and full electromechanical coupling are guaranteed. The formulation results in a coupled finite element model with mechanical (displacements) and electrical (charges at electrodes) degrees of freedom. For a Graphite-Epoxy (Carbon-Fibre Reinforced) laminate composite plate, a parametric analysis is performed to evaluate optimal locations along the plate plane (xy) and thickness (z) that maximize the effective modal electromechanical coupling coefficient. Then, the passive vibration control performance is evaluated for a network of optimally located shunted piezoelectric patches embedded in the plate, through the design of resistance and inductance values of each circuit, to reduce the vibration amplitude of the first four vibration modes. A vibration amplitude reduction of at least 10 dB for all vibration modes was observed. Then, an analysis of the control authority enhancement due to the resonant shunt circuit, when the piezoelectric patches are used as actuators, is performed. It is shown that the control authority can indeed be improved near a selected resonance even with multiple pairs of piezoelectric patches and active-passive circuits acting simultaneously.