Substoichiometric determination of heavy rare earths by isotopic dilution analysis

A substoichiometric method for the determination of heavy rare earths (holmium, thulium) has been developed. After the addition of a substoichiometric amount of EDTA to the test sample of rare earth labelled with its radioactive isotopes, the negatively charged complex formed was separated by passage through a column of Dowex 50 x 8. Interfering metals can be removed by preliminary cupferron and diethylammonium diethyldithiocarbamate extraction. Concentrations of rare earth down to 4 x 10(-7)g 5 ml have been determined.     

Ab initio potential energy surface, variational transition state theory, and quasiclassical trajectory studies of the F+CH4-->HF+CH3 reaction

In this work we present a study of the F+CH(4)-->HF+CH(3) reaction (DeltaHdegrees(298 K)=-32.0 kcal mol(-1)) using different methods of the chemical reaction theory. The ground potential energy surface (PES) is characterized using several ab initio methods. Full-dimensional rate constants have been calculated employing the variational transition state theory and using directly ab initio data. A triatomic analytical representation of the ground PES was derived from ab initio points calculated at the second- and fourth-order M?ller-Plesset levels with the 6-311+G(2df,2pd) basis set, assuming the CH(3) fragment to be a 15 a.m.u. pseudoatom in the fitting process. This is suggested from experiments that indicate that the methyl group is uncoupled to the reaction coordinate. A dynamics study by means of the quasiclassical trajectory (QCT) method and employing this analytical surface was also carried out. The experimental data available on the HF internal states distributions are reproduced by the QCT results. Very recent experimental information about the reaction stereodynamics is also borne out by our QCT calculations. Comparisons with the benchmark F+H(2) and analogous Cl+CH(4) reactions are established throughout.     

Flow injection determination of cobalt after its sorption onto polyurethane foam loaded with 2-(2-thiazolylazo)-p-cresol (TAC)

An electrochemically stable monolayer of tris(2,2'-bipyridyl)ruthenium(II) was obtained for the first time. It was based on the electrostatic attachment of Ru(bpy)(3)(2+) to the benzene sulfonic acid monolayer film, which was covalently bound onto glassy carbon electrode by the electrochemical reduction of diazobenzene sulfonic acid. The surface-confined Ru(bpy)(3)(2+) underwent reversible surface process, and reacted with the coreactant, tripropylamine, to produce electrochemiluminescence. In view of the stability of the electrode, the results strongly suggested that light was emitted from the surface-confined Ru(bpy)(3)(2+), not from the detached Ru(bpy)(3)(2+). The Ru(bpy)(3)(2+) modified electrode was used to the determination of tripropylamine. It showed good linearity in the concentration range from 5 muM to 1 mM with a detection limit of 1 muM (S/N=4). The good stability of the Ru(bpy)(3)(2+) modified electrode also showed that the benzene sulfonic acid monolayer film prepared can be served as an excellent support to construct multilayers.     

A comparison of performance of various analytical columns in pharmaceutical analysis: conventional C18 and high throughput C18 zorbax columns

New improved types of analytical columns Zorbax Eclipse XDB-C18 (75 mm x 4.6 mm i.d., 3.5 microm) and Zorbax Eclipse XDB-C18 (50 mm x 4.6 mm i.d., 1.8 microm) have been tested for determination of estradiol (active substance), methylparaben, propylparaben (preservatives) and estrone (degradation product) and compared with the conventional C18 columns (250 mm x 3.0 mm i.d., 5.0 microm). The Zorbax columns differ with their particle size, column length and ODS (octadecylsilica) type as well. Higher flow-rates (up to about 2.5 ml min(-1)) could be applied regardless to back-pressure. The analysis - previously done at 40 degrees C - could be performed even at ambient temperature. Analytical run was shortened to 3.5 min (from 12 min used for the conventional C18 column) with the same or better retention characteristics. System suitability data for all Zorbax columns show the advantages of these columns for the practical use in routine quality control of pharmaceuticals, particularly from the point of view of speed of analysis and solvent consumption.     

Comparison of the fragility index of different eudragit polymers determined by activation enthalpies

The present study aimed to apply fragility index (m) of polymers in the determination of the optimal amount of plasticizer in polymer films. The fragility index of different Eudragit polymers (RS, RL, EPO) was assessed by differential scanning calorimerty (DSC), applying the Arrhenius connection (logq–1/T _g). The fragility of Eudragit EPO films proved to be the highest, while in the case of RS and RL, the increase of the alkyl-chain length caused the increase of fragility. Studying the effect of plasticizer (triethyl citrate, TEC) on the m value of Eudragit RL and RS films, a near linear reduction of the fragility index could be observed between 5–30% TEC concentration, but above 30%, this value leveled out to constant.     

Gas chromatographic method for the determination of N-acetyl-S-(N-methylcarbamoyl)cysteine, a metabolite of N,N-dimethylformamide and N-methylformamide, in human urine

A simple method has been developed for the determination of N-acetyl-S-(N-methylcarbamoyl)cysteine in human urine. Treatment of a urine sample (1 ml) with ethanol (2 ml) and potassium carbonate (1.5 g) produces ethyl N-methylcarbamate, which is extracted into ethanol and measured by packed column gas chromatography with nitrogen-sensitive detection. The limit of quantitation in human urine is 1 microgram/ml and the between-sample coefficient of variation is 5-11%. Simultaneously, N,N-dimethylformamide, N-methylformamide and formamide can also be determined.     

Low-valent cobalt complexes with three different pi acceptor ligands: experimental and DFT studies of the reduced and the low-lying excited states of (R-DAB)Co(NO)(CO), R-DAB = substituted 1,4-diaza-1,4-butadiene

The complexes (RN=CH-CH=NR)Co(NO)(CO) with R = isopropyl, 2,6-diisopropylphenyl, or p-tolyl are chemically and electrochemically reducible to radical anions at potentials which strongly depend on R. The DFT calculated structure for the neutral compound with R = iPr agrees with the experiment, and the computed structure of the anion radical reveals changes according to a reduction of the R-DAB ligand. EPR results confirm an (R-DAB)-based singly occupied molecular orbital in [(RNCHCHNR)Co(NO)(CO)](.-), with minor but detectable contributions from NO as supported by IR spectroelectrochemistry and as quantified by DFT spin density calculations. The calculations indicate increasingly stabilized CO, NO, and RNCHCHNR pi* acceptor orbitals, in that order. On the basis of TD-DFT (time-dependent density functional theory) calculations, the lowest-lying excited states are assigned to metal-to-(R-DAB) charge transfer transitions while bands due to the metal-to-nitrosyl charge transfer occur at higher energies but still in the visible region. Resonance Raman studies were used to probe these assignments.     

Thermal study of vermiculites and mica-vermiculite interstratifications

Simultaneous DTA-TG has been carried out on a set of natural vermiculite samples. Based on their dehydration behaviour the samples can be divided in two groups: (a) those with DTA endothermic peak temperatures at 140°–150°C and 240°–270°C (pure vermiculties) and (b) those with peak temperatures at 95°–115°C (vermiculite with mica or mica-vermiculite interstratifications). The low temperature at which the endothermic effect in group (b) appears is discussed on the basis of dilution due to the inert layers of mica, differences in chemical composition, and lowering of interlamellar water bond energy.     

A ruthenium probe for cell viability measurement using flow cytometry, confocal microscopy and time-resolved luminescence

The capability of the new luminescent probe (dibenzo[h,j] dipyrido[3,2-a:2',3'-c]phenazine)bis(2,2'-bipyridine)ruthenium(II) dication, (RB2Z), to discriminate live and dead cells has been tested on rat hepatocytes and mouse lymphocytes. RB2Z-stained cells were analyzed using flow cytometry, fluorescence (confocal) microscopy and time-resolved luminescence measurements. The established viability probes propidium iodide (PI) and SYTOX green (SG) were used as controls. The intense luminescence of RB2Z at 606 nm is localized in the nucleus of nonviable cells. Viability measurements by flow cytometry and fluorescence microscopy using RB2Z as dead-cell marker yield the same results as PI and SG. The luminescence lifetime of RB2Z also displays sensitivity to cell viability (0.45 and 0.82 microsecond in presence of fully viable and dead cells, respectively). This ruthenium complex is photostable under laser sources and its 200 nm Stokes shift facilitates multicolor labeling experiments in flow cytometry and fluorescence microscopy. Unlike the currently available probes, the long-lived excited state of RB2Z also allows assays based on luminescence decay measurements.