Effects of strontium and calcium simultaneous substitution on electrical and structural properties of Pb1?x?yCaxSryTiO3 thin films

Ferroelectric Pb_1−x−y Ca _x Sr _y TiO₃ thin films (denoted by PCST90, PCST70, and PCST30) were deposited on the Pt/Ti/SiO₂/Si substrates by a chemical solution deposition method. Their properties were investigated from the viewpoint of crystal structure, microstructure, dielectric, and ferroelectric properties. X-ray diffraction patterns revealed the formation of PCST90, PCST70, and PCST30 thin films without any secondary phases. Infrared and Raman spectroscopy results show that a gradual phase transition from tetragonal to pseudocubic or cubic perovskite structure may occur in PCST thin films with the simultaneous increase of Ca²⁺ and Sr²⁺ contents. Both substitution of isovalent Ca²⁺ and Sr²⁺ at Pb²⁺-site enhanced the dielectric constant and reduced the remnant polarization. In addition, ferroelectric test analyses show that the PCST thin films undergo a ferroelectric-to-paraelectric phase transformation with an amount of Pb²⁺, Ca²⁺, and Sr²⁺ at 30%, 35%, and 35% mol, respectively. Hence, the absence of ferroelectric property may be attributed to a decreasing of the octahedron distortion in the perovskite structure accompanied by a weakening of long-range ferroelectric order.     

Electro-oxidation of ethanol using PtSnRh/C electrocatalysts prepared by an alcohol-reduction process

PtRh/C (90:10), PtRh/C (50:50), PtSn/C (50:50), and PtSnRh/C (50:40:10) electrocatalysts were prepared by an alcohol-reduction process using ethylene glycol as solvent and reduction agent and Vulcan Carbon XC72 as supports. The electrocatalysts were characterized by energy-dispersive X-ray analysis, X-ray diffraction, and transmission electron microscopy. The electro-oxidation of ethanol was studied by cyclic voltammetry chronoamperometry at room temperature and on a single cell of a direct ethanol fuel cell at 100 °C. Cyclic voltammetry and chronoamperometry experiments showed that PtSnRh/C and PtSn/C electrocatalysts have similar performance for ethanol oxidation at room temperature, while the activity of PtRh/C electrocatalysts was very low. At 100 °C on a single cell, PtSnRh/C showed superior performance compared to PtSn/C and PtRh/C electrocatalysts.     

Research on calculus: what do we know and where do we need to go?

In this introductory paper we take partial stock of the current state of field on calculus research, exemplifying both the promise of research advances as well as the limitations. We identify four trends in the calculus research literature, starting with identifying misconceptions to investigations of the processes by which students learn particular concepts, evolving into classroom studies, and, more recently research on teacher knowledge, beliefs, and practices. These trends are related to a model for the cycle of research and development aimed at improving learning and teaching. We then make use of these four trends and the model for the cycle of research and development to highlight the contributions of the papers in this issue. We conclude with some reflections on the gaps in literature and what new areas of calculus research are needed.     

Surface‐enhanced Raman scattering and density functional theory studies of bis(4‐aminophenyl)sulfone

Raman and surface‐enhanced Raman scattering (SERS) spectra of dapsone by using colloidal silver nanoparticles have been recorded. Density functional theory was used for the optimization of ground state geometries and simulation of the vibrational spectrum of this molecule. The SERS spectrum with a large silver cluster as a model metallic surface was simulated for the first time. Taking into account the experimental and calculated Raman as well as the SERS normal modes and the corresponding assignments, along with the modeling of the free dapsone and the one in the presence of the colloidal silver nanoparticles, the importance of the sulfone group on the SERS effect in dapsone was inferred. Copyright © 2009 John Wiley & Sons, Ltd.     

Rapid and easy quantification of elemental sulphur in aqueous samples from biological reactors: the turbidimetric method revisited

Recent developments in wastewater treatment have led to a renewed interest to obtain elemental sulphur (S°) as a by-product from bioreactors. However, practical studies are limited by the gap of adequate analytical techniques for its determination. This paper provides a statistical study and matrix effect evaluation of an adapted spectrophotometric method for routine S° analyses in aqueous samples, based on a methodology previously described by Hart (1961). Four complex matrices were tested: domestic sewage and effluent samples from three different bioreactors. Tested performance criteria included linearity, matrix effect, limit of detection and quantification and S° recovery. Results were linear (R² = 0.99994) in the studied range (5 to 100 mg S° L^?1) and no matrix effect was observed. The accuracy was based on recovery values that varied from 100% to 106%. The colloidal S° separation and extraction protocol was also considered suitable for aqueous samples, reaching more than 99.0% of S° recovery.     

Galvanostatically Deposited PtNi Thin-Films as Electrocatalysts for the Hydrogen Evolution Reaction

The synthesis of hybrid platinum materials is fundamental to enable alkaline water electrolysis for cost-effective H₂ generation. In this work, we have used a galvanostatic method to co-deposit PtNi films onto polycrystalline gold. The surface concentrations of Ni (Γ_Ni) and Pt (Γ_Pt) were calculated from electrochemical measurements; the Γ_Pt/Γ_Ni ratio and electrocatalytic activity of these materials towards hydrogen evolution reaction (HER) in 1 M KOH show a strong dependence on the current density pulse applied during the electrodeposition. Analysis of the Tafel parameters hints that, on these deposits, HER proceeds through a Volmer-Heyrovsky mechanism. The galvanostatically deposited PtNi layers present a high current output per Pt gram, 3199 A g_Pt⁻¹, which is significantly larger compared to other PtNi-based materials obtained by more extended and more complex synthesis methods.     

Preconcentration Systems Using Polyurethane Foam/Me-BDBD for Determination of Copper in Food Samples

A new reagent, 6-[2′-(6′-methyl-benzothiazolylazo)]-1,2-dihydroxy-3,5-benzenedisulfonic acid (Me-BDBD), was synthesised and used in on-line and off-line systems for copper preconcentration by solid-phase extraction. Spectrophotometry and Flame Atomic Absorption Spectrometry (FAAS) were the detection techniques. Polyurethane foam loaded with Me-BDBD packed in a minicolumn was used as sorbent in both systems. The spectral characteristics of Me-BDBD were investigated. The optimum pH values for maximum sorption of the metal are between 7.0 and 8.5. Copper was desorbed with 0.05 and 0.50 mol L⁻¹ hydrochloric acid solutions, for on-line and off-line systems, respectively. The effects of several foreign substances on the adsorption of copper are reported. The enrichment factors obtained were 7 (on-line) and 26 (off-line) for the systems. The proposed procedures allowed the determination of copper with detection limits of 3.4 and 1.4 μg L⁻¹ (0.85 and 0.35 μg per gram of sample) for on-line and off-line systems, respectively. The precision of the procedures was also calculated: 3.2 (on-line) and 1.9% (off-line). The validation of the procedures was carried out by analysis of certified reference material. The copper contents in corn and rice flour and black tea samples were determined by applying the proposed procedures.     

A comparative study of calibration transfer methods for determination of gasoline quality parameters in three different near infrared spectrometers

This work presents a comparative study of calibration transfer among three near infrared spectrometers for determination of naphthenes and RON (Research Octane Number) in gasoline. Seven transfer methods are compared: direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), reverse standardization (RS), piecewise reverse standardization (PRS), slope and bias correction (SBC) and model updating (MU). Two pre-treatment procedures, namely standard normal variate (SNV) and multiplicative scatter correction (MSC), are also investigated. The choice of an appropriate number of transfer samples for each technique, as well as the effect of window size in PDS/PRS and OSC components, are discussed. A broad set of gasoline samples representative of the Northeastern states of Brazil is employed in the investigation. The results show that the use of calibration transfer yields prediction errors comparable to those obtained with complete recalibration of the secondary instrument. Overall, the results point to RS as the best method for the analytical problem under consideration. When storage and/or physical transportation of transfer samples are impractical, MU is more appropriate. The comprehensive investigation carried out in the present work will be of value for practitioners involved in networks of fuel monitoring.     

Evidence for Multiple Binding Modes in the Initial Contact Between SARS-CoV-2 Spike S1 Protein and Cell Surface Glycans**

Infection of host cells by SARS-CoV-2 begins with recognition by the virus S (spike) protein of cell surface heparan sulfate (HS), tethering the virus to the extracellular matrix environment, and causing the subunit S1-RBD to undergo a conformational change into the ‘open’ conformation. These two events promote the binding of S1-RBD to the angiotensin converting enzyme 2 (ACE2) receptor, a preliminary step toward viral-cell membrane fusion. Combining ligand-based NMR spectroscopy with molecular dynamics, oligosaccharide analogues were used to explore the interactions between S1-RBD of SARS CoV-2 and HS, revealing several low-specificity binding modes and previously unidentified potential sites for the binding of extended HS polysaccharide chains. The evidence for multiple binding modes also suggest that highly specific inhibitors will not be optimal against protein S but, rather, diverse HS-based structures, characterized by high affinity and including multi-valent compounds, may be required.     

Investigations of the catalytic properties of manganese oxides for the oxygen reduction reaction in alkaline media

The oxygen reduction reaction (ORR) was studied in KOH electrolyte on different manganese oxides, dispersed on a carbon powder (MnO_x/C). The oxides were prepared by different methods, for producing MnO, Mn₃O₄ and MnO₂ as major phases dispersed on the Vulcan XC-72 carbon. The oxides were characterized by XRD (X-ray diffraction) and in situ XANES (X-ray absorption near edge structure). The electrochemical measurements were made using cyclic voltammetry and steady state polarization curves carried out in an ultra-thin layer rotating ring/disk electrode. The results have shown lower activity for the ORR on the MnO_x/C species compared to that on Pt/C, but higher activity compared to that of pure Vulcan carbon. Formation of involving 2e⁻ per O₂ molecule is the main path of the ORR in the studied MnO_x/C catalysts but, at low overpotentials and rotation rates the number of electrons is raised to 4 due to the occurrence of a disproportionation reaction. Large differences of electrocatalytic activity were seen for the different oxide species, and these were related to the presence of a Mn(IV) phase and the occurrence of a mediation processes involving the reduction of Mn(IV) to Mn(III), followed by the electron transfer of Mn(III) to oxygen.