Flexural-torsional bifurcations of a cantilever beam under potential and circulatory forces I: Non-linear model and stability analysis

The stability of a cantilever elastic beam with rectangular cross-section under the action of a follower tangential force and a bending conservative couple at the free end is analyzed. The beam is herein modeled as a non-linear Cosserat rod model. Non-linear, partial integro-differential equations of motion are derived expanded up to cubic terms in the transversal displacement and torsional angle of the beam. The linear stability of the trivial equilibrium is studied, revealing the existence of buckling, flutter and double-zero critical points. Interaction between conservative and non-conservative loads with respect to the stability problem is discussed. The critical spectral properties are derived and the corresponding critical eigenspace is evaluated.     

Constitutive branching analysis of cylindrical bodies under in-plane equibiaxial dead-load tractions

Finite homogeneous deformations of hyperelastic cylindrical bodies subjected to in-plane equibiaxial dead-load tractions are analyzed. Four basic equilibrium problems are formulated considering incompressible and compressible isotropic bodies under plane stress and plane deformation condition. Depending on the form of the stored energy function, these plane problems, in addition to the obvious symmetric solutions, may admit asymmetric solutions. In other words, the body may assume an equilibrium configuration characterized by two unequal in-plane principal stretches corresponding to equal external forces. In this paper, a mathematical condition, in terms of the principal invariants, governing the global development of the asymmetric deformation branches is obtained and examined in detail with regard to different choices of the stored energy function. Moreover, explicit expressions for evaluating critical loads and bifurcation points are derived. With reference to neo-Hookean, Mooney-Rivlin and Ogden-Ball materials, a broad numerical analysis is performed and the qualitatively more interesting asymmetric equilibrium branches are shown. Finally, using the energy criterion, a number of considerations are put forward about the stability of the computed solutions.     

Novel synthesis of 19-nor-vitamin D compounds

1,25-Dihydroxy-19-nor-vitamin D₃ was prepared efficiently in a convergent synthesis starting with (−)-quinic acid and a ketone of the Windaus-Grundmann type.     

Electroless silver plating of the surface of organic semiconductors

The integration of nanoscale processes and devices demands fabrication routes involving rapid, cost-effective steps, preferably carried out under ambient conditions. The realization of the metal/organic semiconductor interface is one of the most demanding steps of device fabrication, since it requires mechanical and/or thermal treatments which increment costs and are often harmful in respect to the active layer. Here, we provide a microscopic analysis of a room temperature, electroless process aimed at the deposition of a nanostructured metallic silver layer with controlled coverage atop the surface of single crystals and thin films of organic semiconductors. This process relies on the reaction of aqueous AgF solutions with the nonwettable crystalline surface of donor-type organic semiconductors. It is observed that the formation of a uniform layer of silver nanoparticles can be accomplished within 20 min contact time. The electrical characterization of two-terminal devices performed before and after the aforementioned treatment shows that the metal deposition process is associated with a redox reaction causing the p-doping of the semiconductor.     

Electrochemical genosensors for the detection of Bonamia parasite. Selection of single strand-DNA (ssDNA) probes by simulation of the secondary structure folding

A post-PCR nucleic acid work by comparing experimental data, from electrochemical genosensors, and bioinformatics data, derived from the simulation of the secondary structure folding and prediction of hybridisation reaction, was carried out in order to rationalize the selection of ssDNA probes for the detection of two Bonamia species, B. exitiosa and B. ostreae, parasites of Ostrea edulis.Six ssDNA probes (from 11 to 25 bases in length, 2 thiolated and 4 biotinylated) were selected within different regions of B. ostreae and B. exitiosa PCR amplicons (300 and 304 bases, respectively) with the aim to discriminate between these parasite species. ssDNA amplicons and probes were analyzed separately using the “Mfold Web Server” simulating the secondary structure folding behaviour. The hybridisation of amplicon-probe was predicted by means of “Dinamelt Web Server”. The results were evaluated considering the number of hydrogen bonds broken and formed in the simulated folding and hybridisation process, variance in gaps for each sequence and number of available bases. In the experimental part, thermally denatured PCR products were captured at the sensor interface via sandwich hybridisation with surface-tethered probes (thiolated probes) and biotinylated signalling probes. A convergence between analytical signals and simulated results was observed, indicating the possibility to use bioinformatic data for ssDNA probes selection to be incorporated in genosensors.     

Influence of mixed thiolate/thioether versus dithiolate coordination on the accessibility of the uncommon +I and +III oxidation states for the nickel ion: an experimental and computational study

Sulfur-rich nickel metalloenzymes are capable of stabilizing Ni(I) and Ni(III) oxidation states in catalytically relevant species. In an effort to better understand the structural and electronic features that allow the stabilization of such species, we have investigated the electrochemical properties of two mononuclear N(2)S(2) Ni(II) complexes that differ in their sulfur environment. Complex 1 features aliphatic dithiolate coordination ([NiL], 1), and complex 2I is characterized by mixed thiolate/thioether coordination ([NiL(Me)]I, 2I). The latter results from the methylation of a single sulfur of 1. The X-ray structure of 2I reveals a distorted square planar geometry around the Ni(II) ion, similar to what was previously reported by us for 1. The electrochemical investigation of 1 and 2(+) shows that the addition of a methyl group shifts the potentials of both redox Ni(II)/Ni(I) and Ni(III)/Ni(II) redox couples by about 0.7 and 0.6 V to more positive values. Through bulk electrolyses, only the mononuclear dithiolate [Ni(I)L](-) (1(-)) and the mixed thiolate/thioether [Ni(III)L(Me)](2+) (2(2+)) complexes were generated, and their electronic properties were investigated by UV-vis and EPR spectroscopy. For 1(-) (Ni(I), d(9) configuration) the EPR data are consistent with a d(x(2))(-)(y(2)) based singly occupied molecular orbitals (SOMOs). However, DFT calculations suggest that there is also pronounced radical character. This is consistent with the small g-anisotropy observed in the EPR experiments. The spin population (Mulliken analysis) analysis of 1(-) reveals that the main contribution to the SOMO (64%) is due to the bipyridine unit. Time dependent density functional theory (TD-DFT) calculations attribute the most prominent features observed in the electronic absorption spectrum of 1(-) to metal to ligand charge transfer (MLCT) transitions. Concerning 2(2+), the EPR spectrum displays a rhombic signal with g(x) = 2.236, g(y) = 2.180, and g(z) = 2.039 in CH(3)CN. The g(iso) value is larger than 2.0, which is consistent with metal based oxidation. The unpaired electron (Ni(III), d(7) configuration) occupies a Ni-d(z(2)) based molecular orbital, consistent with DFT calculations. Nitrogen hyperfine structure is observed as a triplet in the g(z) component of the EPR spectrum with A(N) = 51 MHz. This result indicates the coordination of a CH(3)CN molecule in the axial position. DFT calculations confirm that the presence of a fifth ligand in the coordination sphere of the Ni ion is required for the metal-based oxidation process. Finally, we have shown that 1 exhibits catalytic reductive dehalogenation activity below potentials of -2.00 V versus Fc/Fc(+) in CH(2)Cl(2).     

Anthraquinone profile, antioxidant and antimicrobial properties of bark extracts of Rhamnus catharticus and R. orbiculatus

The anthraquinone profile, antioxidant and antimicrobial activities as well as the total phenol and total flavonoid contents were determined in methanol extracts of the barks of Rhamnus catharticus L. and R. orbiculatus Bornm. The most abundant anthraquinone derivatives in R. catharticus were physcion (67.8%) and emodin (26.2%), while R. orbiculatus contained mostly physcion (81.3%) and chrysophanol (14.6%). R. catharticus displayed better activity in the beta-carotene-linoleic acid assay, as well as chelating activity, whereas its activity in the reducing power assay was significantly lower than that of R. orbiculatus. Both methanol extracts showed antimicrobial activity against all microbial species tested (Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Candida albicans, Aspergillus niger, Microsporum gypseum) with MIC values either equal to or lower than 2.50 mg/mL. R. catharticus and R. orbiculatus contained several anthranoid aglycones and their bark extracts demonstrated notable antioxidant and antimicrobial properties. The results obtained indicate the medicinal potential of these two species.     

Anodic TiO2 Nanotube Layers for Wastewater and Air Treatments: Assessment of Performance Using Sulfamethoxazole Degradation and N2O Reduction

The preparation of anodic TiO₂ nanotube layers has been performed using electrochemical anodization of Ti foil for 4 h at different voltages (from 0 V to 80 V). In addition, a TiO₂ thin layer has been also prepared using the sol–gel method. All the photocatalysts have been characterized by XRD, SEM, and DRS to investigate the crystalline phase composition, the surface morphology, and the optical properties, respectively. The performance of the photocatalyst has been assessed in versatile photocatalytic reactions including the reduction of N₂O gas and the oxidation of aqueous sulfamethoxazole. Due to their high specific surface area and excellent charge carriers transport, anodic TiO₂ nanotube layers have exhibited the highest N₂O conversion rate (up to 10% after 22 h) and the highest degradation extent of sulfamethoxazole (about 65% after 4 h) under UVA light. The degradation mechanism of sulfamethoxazole has been investigated by analyzing its transformation products by LC-MS and the predominant role of hydroxyl radicals has been confirmed. Finally, the efficiency of the anodic TiO₂ nanotube layer has been tested in real wastewater reaching up to 45% of sulfamethoxazole degradation after 4 h.