Preparation of CoxFe3?xO4 nanoparticles by thermal decomposition of some organo-metallic precursors

This paper presents a study for the preparation of Co_xFe_3−xO₄ (x = 0.02, 0.2, 0.5, 0.8, 1.0, 1.1, 1.5) nanoparticles, starting from metal nitrates: Co(NO₃)₂·6H₂O, Fe(NO₃)₃·9H₂O and ethylene glycol (C₂H₆O₂). By heating the solutions metal nitrates-ethylene glycol, the redox reaction took place between the anion NO₃ ⁻ and OH–(CH₂)₂–OH with formation of carboxylate anions. The resulted carboxylate anions reacted with Co(II) and Fe(III) cations to form coordinative compounds which are precursors for cobalt ferrite. XRD and magnetic measurements have evidenced the formation of cobalt ferrite for all studied molar ratios. The average diameter of the cobalt ferrite crystallites was estimated from XRD data and showed values in the range 10–20 nm. The crystallites size depends on the annealing temperature. The magnetization of the synthesized samples depends on the molar ratio Co/Fe and on the annealing temperature.     

Study on the influence of teos–diol molar ratio on their chemical interaction during the gelation process

Hybrid organic–inorganic materials, silica–diol, were synthesized by the sol–gel process from mixtures of tetraethylorthosilicate (TEOS) and diols: ethylene glycol (HO–CH₂–CH₂–OH) and 1,3 propane diol (HO–CH₂–CH₂–CH₂–OH), in acid catalysis. The gels have been synthesized for a molar ratio H₂O:TEOS = 4:1 and different molar ratios diol/TEOS: 0.25; 0.5; 0.75; 1.0; 1.25 and 1.5. The resulting gels were studied by thermal analysis and FT-IR spectroscopy, in order to evidence the interaction of diols with silica matrix. Thermal analysis indicated that the condensation degree increases with the molar ratio diol/TEOS until a certain value. The thermal decomposition of the organic chains bonded within the silica network in the temperature range 250–320 °C, leaded to a silica matrix with modified morphology. The adsorption–desorption isotherms type is different for the samples with and without diol. Thus, the specific surface areas have values <11 m²/g for the samples without diol and >200 m²/g for the samples with diols, depending on the annealing temperature.     

Low-dimensional compounds containing cyano groups. XVII. Crystal structure, spectroscopic, thermal and magnetic properties of [Cu(bmen)2][Pt(CN)4] (bmen=N,N′-dimethylethylenediamine)

The synthesis, structural analysis, spectroscopic studies, susceptibility and specific-heat measurements of {[Cu(bmen)₂][Pt(CN)₄]}_n (bmen=N,N′-dimethylethylenediamine) are presented. X-ray crystal-structure analysis revealed that the [Pt(CN)₄]²⁻ building blocks are combined with [Cu(bmen)₂]²⁺ units to form a chain-like structure along the a axis. The Cu(II) atoms are hexacoordinated by four nitrogen atoms in the equatorial plane belonging to two molecules of bidentate bmen ligands with average Cu-N distance of 2.043(18) Å. The axial positions are occupied by two nitrogen atoms from bridging [Pt(CN)₄]²⁻ anions at a longer axial Cu-N distance of 2.490(4) Å. The compound is characterized by the presence of a weak antiferromagnetic exchange coupling J/k_B=0.6 K. Despite the one-dimensional (1D) character of the structure, the analysis of the magnetic properties and specific heat at very low temperatures shows that [Cu(bmen)₂][Pt(CN)₄] behaves as a two-dimensional (2D) square-lattice Heisenberg magnet with weak interlayer coupling.     

Multisyringe flow injection analysis system for automation of standard addition calibration method

In the present work, the multi-channel features of multisyringe flow injection analysis (MSFIA) were exploited for the first time to implement calibration based on standard addition method (SAM). For this, standard solutions containing different concentrations of target analyte were placed in each syringe of the multisyringe and connected to a flow network where in-line mixing of sample and standard through a merging zone approach was established prior to detection of analyte. Using this strategy, artifacts reported before in SAM using flow injection analysis were avoided as the concentration of the analyte in the resulting mixture was related to the dilution of sample and added standard within the system, and the concentration of all matrix components was kept constant during all measurements. The feasibility of the proposed MSFIA system was assessed through application to potentiometric determination of chloride ion in electroplating bath and milk samples. Results obtained for samples (n = 15) were not statistically different from those provided by titrimetric procedures, with an excellent throughput (20–31 samples h^{− 1}), comprising four-level addition of chloride ion.     

A novel two-dimensional Ni(II) fumarato complex: Solvothermal synthesis, crystal structure and magnetic properties

Dark green single crystals of [Ni(fum)(phen)] (fum = fumarato, phen = 1,10-phenanthroline) (1) have been prepared under solvothermal conditions. Its crystal structure exhibits two dimensional (2D) character. The formed layers are built of dimers of crystallographically non-equivalent Ni(II) atoms linked by bridging fumarato ligands; one is of the μ₄-bridge type with both carboxylato groups coordinated in syn-anti fashion while in the second one both carboxylate groups form a chelate-like coordination. Both Ni(II) atoms are hexa-coordinated in the cis-NiO₄N₂ form; two coordination positions are occupied by a N-bonded chelate phen molecule and four positions by oxygen atoms from the fum ligands. The layers are interconnected by π–π interactions operating between aromatic rings of the phen ligands. The analysis of the experimental thermodynamic data supports the structural assumptions and showed that magnetic subsystem of 1 can be approximated by an array of antiferromagnetic S = 1 dimers with easy-axis uniaxial magnetic anisotropy D comparable to intradimer exchange coupling J, D/J ≈ 1 and D/k_B = −6 K. The specific heat data clearly indicate the absence of a phase transition to the ordered state at least at temperatures down to 2 K.     

Development and Validation of a Stability-Indicating LC Method for Determination of Ebastine in Tablet and Syrup

A simple stability-indicating reversed-phase liquid chromatographic method with diode-array detection was developed and validated for the quantitative determination of ebastine in tablets and syrup. The LC method was carried out on a C₁₈ column with acetonitrile:phosphoric acid 0.1% pH 3.0 (55:45, v/v) as mobile phase, at a flow rate of 1.2 mL min⁻¹. Ultraviolet detection of ebastine was at 254 nm. A linear response (r = 0.9999) was observed in the range of 10–80 μg mL⁻¹. The RSD values for intra- and inter-day precision studies showed good results (RSD < 2%) and accuracy was greater than 98%. Validation parameters such as specificity and robustness were also determined. The method was found to be stability-indicating and can be applied to quantitative determination of ebastine in tablets and syrup.

     

Lysozyme binding to poly(4-vinyl-N-alkylpyridinium bromide)

The adsorption behavior of polycations at ionic strengths (I) ranging from 0.001 to 0.1 onto silicon wafers was studied by means of ellipsometry, contact angle measurements and atomic force microscopy (AFM). Polycations chosen were bromide salts of poly(4-vinylpyridine) N-alkyl quaternized with linear aliphatic chains of 2 and 5 carbon atoms, QPVP-C2 and QPVP-C5, respectively. Under I=0.001 the reduction of screening effects led to low adsorbed amounts of QPVP-C2 or QPVP-C5 (1.0±0.1 mg/m²), arising from the adsorption of extended chains. Upon increasing I to 0.1, screening effects led to conformational changes of polyelectrolyte chains in solution and to higher adsorbed amount values (1.9±0.2 mg/m²). Advancing contact angle θ_a measurements performed with water drops onto QPVP-C2 and QPVP-C5 adsorbed layers varied from (45±2)° to (50±5)°, evidencing the exposure of both hydrophobic alkyl groups and charged moieties. The adsorption of lysozyme (LYZ) molecules to QPVP-C5 layers was more pronounced than to QPVP-C2 films. Antimicrobial effect of LYZ bound to QPVP-C2 or QPVP-C5 layers or to Si wafers was evaluated with enzymatic assays using Micrococcus luteus as substrates. The adsorption behavior of QPVP-C2 and QPVP-C5 at the water–air interface was studied by means of surface tension measurements. Only QPVP-C5 was able to reduce water surface tension. Mixtures of LYZ and QPVP-C5 were more efficient in reducing surface tension than pure LYZ solution, evidencing co-adsorption at liquid–air interface. Moreover, antimicrobial action observed for mixtures of LYZ and QPVP-C5 was more pronounced than that measured for pure LYZ. Hydrophobic interaction between LYZ and QPVP-C5 in solution seems to drive the binding and to preserve LYZ secondary structure.     

Chitosan based nonstoichiometric polyelectrolyte complexes as specialized flocculants

The aim of this work was to evaluate the flocculation of kaolin by using positively charged nonstoichiometric interpolyelectrolyte complex (N-PEC) nanoparticles formed by the interaction of chitosan with poly(sodium 2-acrylamido-2-methylpropanesulfonate) (NaPAMPS) and two random copolymers of AMPS with t-butyl acrylamide, comparative with chitosan. The flocculation efficiency was evaluated by optical density at 500 nm. The N-PEC nanoparticles were more effective than chitosan in the kaolin separation, especially at low molar ratios between charges, when the flocculation window was more then double at an optimum dose lower than that of chitosan. The main advantage of N-PECs is the increase of critical concentration for kaolin re-stabilization, the N-PEC particles adsorbed on the kaolin surface protecting them more efficient against re-dispersion. The influence of low molar mass electrolytes on the flocculation with N-PECs was also investigated.     

Interactions between flaxseed gums and WPI-stabilized emulsion droplets assessed in situ using diffusing wave spectroscopy

Diffusing wave spectroscopy (DWS) was used to investigate the behavior of flaxseed gums when added to WPI-stabilized emulsions. The effect of different concentrations (0–0.33% (w/v)) of flaxseed gum, derived from two seed varieties, namely Emerson and McDuff, was studied at acidic and neutral pH. At pH 7.0 and low gum concentrations the dynamic and spatial characteristics of the system remained unchanged. While at gum concentrations from 0.075% to 0.20% a rapid phase separation was observed, at higher concentrations phase separation was retarded because of the increased background viscosity slowing down the mobility of the emulsion droplets. At pH 3.5, the difference in overall electrical charge between the gum (negative) and the protein on the emulsion surface (positive) led to electrostatic interactions. While at low concentration of flaxseed gum the general characteristics of the emulsions were not significantly different, at intermediate concentrations, bridging flocculation occurred. When sufficient flaxseed gum was present, the emulsion droplets mobility was arrested in a gel-like state. In spite of the compositional differences in the ratio of acidic and neutral fraction between the two polysaccharides extracted from different seed varieties, at both values of pH the behavior of the emulsions after addition of the polysaccharide was comparable.