Application of partial least-squares regression to the resolution of highly correlated spectra. Simultaneous spectrofluorimetric determination of Al(3+), Ga(3+) and In(3+)

The simultaneous spectrofluorimetric determination of mixtures of aluminium, gallium and indium as their 8-hydroxyquinoline complexes following extraction into chloroform is studied. The high collinearity of the spectra hindered their resolution by multiple linear regression (MLR) methodology; therefore, experimental data were processed by partial least-squares regression (PLSR) methodology. A previous step in the study of three-dimensional fluorescence spectrum is possible to select the best information to quantify this system with high collinearity. Finally the optimal conditions for quantitation, the best data preprocessing procedure and the most suitable spectral mode for calibration were established. Using an external set allowed the three analytes to be determined simultaineously at concentrations below 1 mug ml(-1) with errors less than 10% for aluminium and indium, and 15% for gallium.     

Infrared Study of Solid Dispersions of β-Cyclodextrin with Naphthalene Derivitaves

The inclusion complexes of β-cyclodextrin (β-CD) with naphthalene and some of its derivatives in the solid state have been studied by infrared spectroscopy. Digital subtraction, deconvolution and curve fitting have been used to investigate the interactions between the naphthalene derivatives andβ-CD. Several preparation methods for the solid dispersions have been tested, using FTIR as an effective tool to evaluate the interactions at the molecular level. The effects of temperature and humidity on the spectra have been also analyzed. A carbonyl moiety in the guest molecule can increase the stability of the complex by establishing specific interactions with the hydroxyl groups of the CD cavity rims. The stability of the complexes is higher for 2-naphthylacetate than that for 1-naphthyl acetate, andso is the degree of association of its carbonyl groups. On the other hand, 2-acetylnaphthaleneforms very stable inclusioncomplexes although its carbonyl groups appear to be significantly less associated.     

Determination of Benzo[a]pyrene in smoking-flavour agents (water-soluble liquid smoke) by second derivative constant-wavelength synchronous spectrofluorimetry

We have developed a simple, rapid, inexpensive method for the determination of benzo[a]pyrene (BP, a known carcinogen) in smoking-flavour agents (water-soluble liquid smoke; WSLS). After purification of the WSLS by a single passage through a Sep Pak C18 Plus cartridge, BP in the hexane eluate was determined by second derivative constant-wavelength synchronous spectrofluorimetry. Method precision (RSD < 6%) and recovery ( approximately 92%) were satisfactory, and the detection and quantification limits (1.05 and 2.28 mug kg(-1) respectively) indicated that the current maximum permissible concentration of BP in smoke flavourings (10 mug kg(-1)) can be monitored by this method.     

Electrochemical and ESR study of 5-nitrofuryl-containing thiosemicarbazones antiprotozoal drugs

Cyclic voltammetry and electron spin resonance (ESR) techniques were used in the investigation of several potential antiprotozoal thiosemicarbazones nitrofurane derivatives. A self-protonation process involving the protonation of the nitro group due to the presence of an acidic proton in the thiosemicarbazone moiety was observed in the first step of a CEE(rev) reduction mechanism of these derivatives. ESR spectra of the free radicals obtained by electrolytic reduction were characterized and analyzed. AM1 methodology was used to obtain the optimized geometries and UB3LYP calculations were performed to obtain the theoretical hyperfine coupling constants. The theoretical study exhibited an unusual assignment of the spin densities showing a free radical centered in the thiosemicarbazone moiety rather than the nitro which are in agreement with the experimental hyperfine pattern.     

Rheological and Electrokinetic Properties of Sodium Montmorillonite Suspensions

Because of their particular electric surface properties and crystal structure, most clay minerals possess a very high ion exchange capacity. Furthermore, the surface charge distribution is anisotropic: while faces of the laminar clay particles have a negative, pH-independent charge, edges may be positive or negative, depending on pH. In this work, we propose to contribute new data on particle-particle interaction and charge distribution, by means of measurements of the low-frequency dielectric dispersion (LFDD) of the clay suspensions. Because of the nonspherical shape of clay particles, there are no theoretical models capable of explaining the experimental relaxation spectra. Hence, we limit ourselves to obtaining indirect information by comparing LFDD spectra in different experimental conditions. The quantities of interest in LFDD are the value of the low-frequency dielectric constant, epsilon'(r)(0), and the characteristic or relaxation frequency, omega(cr). These two parameters were measured varying the weight fraction, straight phi, of clay (0.5, 1, and 1.5% w/v) and the pH of the dispersion medium (5, 7, and 9), while maintaining the ionic strength constant ([NaCl]=10(-4) M). It was found that the characteristic relaxation frequency of the dielectric constant was pH-dependent, with a significant minimum at pH 7 in all cases. The results are interpreted as the superposition of two independent relaxation phenomena, associated with edges and faces. With respect to the weight fraction influence, we have found a linear behavior of epsilon'(r)(0) with straight phi at pH 9, indicating the existence of no significant interaction between particles. However, at pH 7 a slight deviation of linearity is observed, and at pH 5 we observe a clearly nonlinear behavior, indicating a stronger degree of interaction between particles. This is in good agreement with the initial assumption that at acid pH values, the electric surface charge of faces is negative, whereas the edges possess a positive charge, thus favoring attractive face-to-edge interaction. Copyright 2000 Academic Press.     

Tröger's base scaffold in racemic and chiral fashion as a spacer for bisdistamycin formation. Synthesis and DNA binding study

‘Head-to-head’ oligo-N-methylpyrrole peptide dimers linked by a methano[1,5]diazocin scaffold are presented in racemic as well as chiral fashion. Their DNA binding activities were assayed on calf thymus DNA, poly(dA-dT)₂, and poly(dC-dG)₂ by NMR and ECD spectroscopies, and fluorescence probe displacement assay. The presented dimers prefer AT sequences, but show higher affinity to poly(dC-dG)₂ than distamycin A. The (4R,9R) configuration of methanodiazocin bridge was found to be better suited for interaction with ct-DNA and poly(dA-dT)₂ than (4S,9S) configuration.     

Hydrogen sulphide doping of GaAs and AlxGa1−xAs grown by molecular beam epitaxy (MBE)

H₂S gas has been used during molecular beam epitaxy (MBE) growth of GaAs and Al _x Ga_1–x As as sulphur vector forn-type doping. Doping efficiencies are less than 10^–3 at usual growth temperatures, and are limited by an incorporation competitive surface process, probably 2Ga+H₂SGa₂S+H₂. In Al_xGa_1–x As forx0.2 the doping efficiency is further reduced by carrier freeze-out at deep levels. Measured thermal activation energies depend on growth conditions and remain relatively low even up to the direct-indirect bandgap crossover for substrate temperatures in the 585–645 C range.     

Spectrophotometric study of bismuth with N-(2-acetamido)iminodiacetic acid (ADA): Determination of bismuth in pharmaceutical formulations

A new method for the Spectrophotometric determination of bismuth using N-(2-acetamido)iminodiacetic acid as complexometric agent is proposed. The complex is formed in a wide pH range, 5.5–7.5, and has a maximum absorption at 265 nm. Beer's law is obeyed in the interval 3.8–17.9 μg of bismuth(III)/ml, with a minimum photometric error of 2.3. The molar absorptivity is 9.1 × 10³ liters/cm mol. The stoichiometry of the reaction takes place in the metal-to-ligand ratio 1:2. The interferences produced by the more common ions are studied. The method has been successfully applied to the determination of bismuth in pharmaceutical formulations.     

On the mechanism of electroluminescence emission by porous silicon layers

The analytical treatment of a model considering the electrooxidation of p-porous silicon layers under galvanostatic conditions is able to give account of experimental facts such as the shape and location of the electroluminescence peak as well as of the spectral shift of the electroluminescence peak produced by oxidation. The proposed model considers electroluminescence to be the result of electron injection into the conduction band by an adsorbed intermediate produced by electrooxidation of the surface coverage with hydrogen or siloxene of the silicon nanocrystallites. The access of holes to the surface is made possible by low accumulation layer conditions and is the rate determining step in the electroluminescence mechanism. In this way it is possible to give a satisfactory explanation to the shift towards the blue experimented by the electroluminiscence emission maximum as a consequence of electrooxidation.