Biodegradation of tobacco waste by composting: Genetic identification of nicotine-degrading bacteria and kinetic analysis of transformations in leachate

The tobacco industry produces large quantities of solid and liquid waste. This waste poses a significant environmental problem, as some major components are harmful and toxic. The aim of this work is to isolate and identify the nicotine-degrading microorganisms in the composting of tobacco waste. The bioremediation process for the detoxification of waste was carried out in a column reactor at an airflow-rate of 0.4 L min^?1 kg^?1. The concentrations of nicotine and number of CFU in the samples taken from reactor were monitored over nineteen days. After nineteen days, 89.8 % of nicotine conversion was obtained. A nicotine-degrading bacterium, strain FN, was isolated from the composting mass and identified as Pseudomonas aeruginosa on the basis of morphology, 16S rDNA sequence, and the phylogenetic characteristics. To confirm that the isolated Pseudomonas aeruginosa FN is the actual nicotine degrader, batch experiments were performed using tobacco leachate. It was confirmed that the strain FN possesses a considerable capacity to degrade nicotine with simultaneous COD removal. The Monod kinetic model for single substrate was applied to obtain the substrate degradation rate and half saturation constant.     

Building the Additive Utility Functions for CAD-UFRJ Evaluation Staff Criteria

This paper presents an application of the UTA method for building utility functions for the evaluation criteria defined by the Staff Evaluation Commission (CAD) of the Rio de Janeiro Federal University (UFRJ). Every year, the CAD-UFRJ gives the staff evaluation results for each Postgraduate Engineering Programme. However, the method used to generate the staff evaluation is assumed unknown. Trying to find the CAD-UFRJ preference structure, the evaluation results supplied by CAD-UFRJ are used to apply the UTA method. Some additional information obtained from the CAD-UFRJ data is incorporated in the optimal solutions analysis.     

PAN composite membrane with different solvent affinities controlled by surface modification methods

Polyacrylonitrile (PAN) composite membranes with surface properties designed by either a chemical modification with ethylenediamine (EDA), or layer‐by‐layer (LbL) polyelectrolyte adsorption were investigated in this paper. Fourier‐transformed infrared (FTIR) spectroscopy and streaming potential measurements showed that the first step of the reaction with EDA in gas phase was the formation of ammonium salts with the reactive carboxylic groups present on the surface of the starting membrane. Part of the ammonium carboxylate groups was transformed in secondary amide linkages by a heat‐induced reaction. Poly(sodium styrenesulfonate) (NaPSS) and a polycation containing about 95 mol % of N,N‐dimethyl‐2‐hydroxypropyleneammonium chloride units in the backbone (PCA₅) were used as opposite polyions in the LbL film construction. The adsorbed polyion amount per every layer was controlled by the nature and concentration of the supporting electrolyte in polyelectrolyte deposition solution (NaBr and KBr). An almost linear increase of the adsorbed polyion amount versus the layer pair number was observed. The swelling degree (SD) in pure alcohols of the LbL‐modified PAN composite membrane decreased with the increase of the solvent polarity and with the decrease of the pore volume by pore filling with polyelectrolyte complex multilayer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4161–4171, 2005     

High‐throughput workflow for identification of phosphorylated peptides by LC‐MALDI‐TOF/TOF‐MS coupled to in situ enrichment on MALDI plates functionalized by ion landing

We report an MS‐based workflow for identification of phosphorylated peptides from trypsinized protein mixtures and cell lysates that is suitable for high‐throughput sample analysis. The workflow is based on an in situ enrichment on matrix‐assisted laser desorption/ionization (MALDI) plates that were functionalized by TiO₂ using automated ion landing apparatus that can operate unsupervised. The MALDI plate can be functionalized by TiO₂ into any array of predefined geometry (here, 96 positions for samples and 24 for mass calibration standards) made compatible with a standard MALDI spotter and coupled with high‐performance liquid chromatography. The in situ MALDI plate enrichment was compared with a standard precolumn‐based separation and achieved comparable or better results than the standard method. The performance of this new workflow was demonstrated on a model mixture of proteins as well as on Jurkat cells lysates. The method showed improved signal‐to‐noise ratio in a single MS spectrum, which resulted in better identification by MS/MS and a subsequent database search. Using the workflow, we also found specific phosphorylations in Jurkat cells that were nonspecifically activated by phorbol 12‐myristate 13‐acetate. These phosphorylations concerned the mitogen‐activated protein kinase/extracellular signal‐regulated kinase signaling pathway and its targets and were in agreement with the current knowledge of this signaling cascade. Control sample of non‐activated cells was devoid of these phosphorylations. Overall, the presented analytical workflow is able to detect dynamic phosphorylation events in minimally processed mammalian cells while using only a short high‐performance liquid chromatography gradient. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of Heterocyclic Analogs of α‐aminoadipic Acid and its Esters Based on Imidazo[2,1‐b][1,3]Thiazole

A method for the preparation of heterocyclic analogs of α‐aminoadipic acid and its esters based on the imidazo[2,1‐b][1,3]thiazole ring system was developed. In this method, free‐radical bromination of ethyl 6‐methylimidazo[2,1‐b][1,3]thiazole‐5‐carboxylate with NBS afforded a versatile building block, ethyl 6‐bromomethylimidazo[2,1‐b][1,3]thiazole‐5‐carboxylate. Coupling of ethyl 6‐bromomethylimidazo[2,1‐b][1,3]thiazole‐5‐carboxylate with Schöllkopf's chiral auxiliary followed by acidic hydrolysis generated ethyl 6‐[(2S)‐2‐amino‐3‐methoxy‐3‐oxopropyl]imidazo[2,1‐b][1,3]thiazole‐5‐carboxylate. A similar procedure using diethyl (Boc‐amino)malonate yielded racemic 2‐amino‐3‐[(5‐ethoxycarbonyl)imidazo[2,1‐b][1,3]thiazol‐6‐yl]propanoic acid.     

Use of ZSM-5 catalyst in deoxygenation of waste cooking oil

This study investigated the potential use of waste cooking oil (WCO) in the production of engine fuels and valuable chemicals via catalytic cracking. WCO was processed in its pure form and in a mixture with hydrotreated vacuum gas oil (HVGO). Catalytic cracking experiments were performed using a microactivity test (MAT) (simulation of the fluid catalytic cracking environment). In cracking over the standard fluid catalytic cracking equilibrium catalyst (FCC-ECAT), the oxygen contained in the feed was consumed in the formation of CO and CO₂, water and into oxygenated organic compounds (phenolics, esters, carboxylic acids, etc.), which were found in the organic phase of the liquid product. In order to remove the unwanted organic oxygenates, the catalytic system based on pure FCC-ECAT was modified by addition of the ZSM-5-based FCC catalyst. By using the mixture containing FCC-ECAT and 10 mass % of FCC-ZSM-5, it was possible to reduce the amount of organic oxygenates to almost the feasible minimum when cracking pure WCO. The effect of the catalyst mixture on cracking the feed mixture of the vacuum gas oil with 10 vol. % of WCO was manifested in the practically zero formation of organic oxygenates and in a gasoline yield comparable with vacuum gas oil (VGO) cracking.     

On the generalized Bohnenblust–Hille inequality for real scalars

In this paper we obtain new lower and upper estimates for the sharp constants in the generalized Bohnenblust–Hille inequality introduced in Albuquerque et al. (J Funct Anal 266:3726–3740, 2014). We apply these results to find optimal constants in the generalized Bohnenblust–Hille inequality and also to recover the optimal constants of the mixed \(\left( \ell _{1},\ell _{2}\right) \)-Littlewood inequalities recently obtained in Pellegrino (J Number Theory 160:11–18, 2016) and Pellegrino and Teixeira (Commun Contemp Math, to appear).     

Characterisation of nickel–zinc ferrite/silica nanocomposites with low ferrite concentration obtained by an improved modified sol–gel method

The paper presents a study regarding the structure, morphology and magnetic behaviour of x% (Ni_0.65Zn_0.35Fe₂O₄)/(100 − x)% SiO₂ ferrimagnetic nanocomposites for low Ni–Zn ferrite concentration (x = 5, 10, 15, 20 and 30 mass percent) obtained by an improved modified sol–gel method. The obtained gels and nanocomposites have been characterized by fast Fourier transform-infrared (FT-IR) spectrometry, X-ray diffraction (XRD), transmission electron microscopy (TEM) and magnetic measurements (MM). The addition of a supplementary quantity of diol in the synthesis, corresponding to a molar ratio EG : TEOS = 1:1, and the control of the thermal treatment applied to the precursor xerogels tetraethylortosilicate (TEOS)–metal nitrates (MN)–ethylene glycol (EG) leads to fine (~2–9 nm), almost spherical Ni–Zn ferrite nanoparticles homogenously dispersed inside the amorphous SiO₂ matrix. TEM images reveal the fine nature and the narrow size distribution of the ferrite nanoparticles. Nanoparticles diameter increases with the ferrite concentration and with the annealing temperature. For all concentrations of ferrite in SiO₂ and all annealing temperature, we have obtained Ni_0.65Zn_0.35Fe₂O₄ ferrite as single phase (proven by XRD) in the amorphous silica matrix, only after a pre-treatment of synthesized gels, at 573 K, for 3 h. The magnetic behaviour of ferrite nanoparticles in quasi-static magnetic fields is very particular, depending on the annealing temperature and the ferrite content in silica matrix. We have obtained superparamagnetic behaviour for the nanocomposites, for a concentration of 30% ferrite in SiO₂ at high annealing temperature, of 1,273 K.     

Enzyme based assays in a sequential injection format: a review

Sequential injection analysis systems have been extensively exploited in the last decades for the implementation of enzyme based assays aiming the evaluation of enzyme activity or the determination of specific analytes. The most prominent aspects of the automation of enzymatic assays in these systems are discussed in this review. Special attention is devoted to the mode of enzyme manipulation in homogeneous or heterogeneous media and to the comparison with batch and flow injection enzyme methodologies. The possibility of implementing strategies for the enhancement of selectivity in specific determinations is also addressed. The more recent trends in this field are discussed focusing mainly on the miniaturization resorting to the lab-on valve platform as well as on the bead injection concept.     

Synthesis and application of imprinted polyvinylimidazole-silica hybrid copolymer for Pb determination by flow-injection thermospray flame furnace atomic absorption spectrometry

A novel ion imprinted polyvinylimidazole-silica hybrid copolymer (IIHC) was synthesized and used as a selective solid sorbent for Pb²⁺ ions preconcentration using an on-line solid phase extraction (SPE) system coupled to TS-FF-AAS. The ionic hybrid sorbent was prepared using 1-vinylimidazole and 3-(trimethoxysilyl)propylmethacrylate as monomers, Pb²⁺ ions as template, tetraethoxysilane as reticulating agent and 2,2′-azobis-isobutyronitrile as initiator. The best on-line SPE conditions concerning sorption behavior, including sample pH (6.46), buffer concentration (9.0 mmol L⁻¹), eluent (HNO₃) concentration (0.5 mol L⁻¹) and preconcentration flow rate (4.0 mL min⁻¹), were optimized by means of full factorial design and Doehlert matrix. The analytical curve ranged from 2.5 to 65.0 μg L⁻¹ (r = 0.999) with limit of detection of 0.75 μg L⁻¹; the precision (repeatability) calculated as relative standard deviation (n = 10) was 5.0 and 3.6% for Pb²⁺ concentration of 10.0 and 60.0 μg L⁻¹, respectively. From on-line breakthrough curve, column capacity was 3.5 mg g⁻¹. Preconcentration factor (PF), consumptive index (CI) and concentration efficiency (CE) were 128.0, 0.16 mL and 25.6 min⁻¹, respectively. The selective performance of the sorbent, based on relative selectivity coefficient, was compared to NIC (non imprinted copolymer) for the binary mixture Pb²⁺/Cd²⁺, Pb²⁺/Cu²⁺ and Pb²⁺/Zn²⁺. The results showed that ion imprinted polyvinylimidazole-silica hybrid polymer had higher selectivity for Pb²⁺ than NIC at 64.9, 16.0 and 8.8 folds. The developed method was successfully applied for highly sensitive and selective Pb²⁺ determination in different kinds of water samples, parenteral solutions and urine. Accuracy was also assessed by analyzing certified reference fish protein (DORM-3) and marine sediment (MESS-3 and PACS-2) with satisfactory results.