Effect of pH on the synthesis and properties of luminescent SiO2/calcium phosphate:Eu3+ core-shell nanoparticles

A novel method for the synthesis of luminescent SiO(2)/calcium phosphate (CaP):Eu(3+) core-shell nanoparticles (NPs) was developed via a sol-gel route followed by annealing at a temperature of 800 °C. The object of this study was the investigation of the effect of pH on the formation of a CaP shell around the silica core. The resulting annealed NPs exhibited an amorphous SiO(2) core and a crystalline luminescent shell. The formation of a CaP layer was possible at pH below 4.5 and above 6.5 during the coating step. The crystal structure of the shell was studied by X-ray diffraction analysis. Hydroxyapatite (HAp) and α-tricalcium phosphate were detected as crystal phases of the surrounding layer. However, NPs produced under basic conditions exhibited a higher crystallinity of the CaP layer than did samples coated at pH below 4.5. In the pH interval between 4.5 and 6.5, no shell growth but the formation of secondary NPs containing CaO and Ca(OH)(2) was observed. Furthermore, SiO(2)/CP:Eu(3+) core-shell NPs were investigated by transmission electron microscopy, dynamic light scattering, Fourier transform infrared spectroscopy, inductively coupled plasma optical emission spectrometry, and photoluminescence spectroscopy. The resulting HAp-coated NPs were successfully tested by a cell-culture-based viability assay with respect to a later application as a luminescent marker for biomedical applications.     

In vitro antiprotozoal activity of extracts of five Turkish Lamiaceae species

The in vitro antiprotozoal activities of crude methanolic extracts from the aerial parts of five Lamiaceae plants (Salvia tomentosa, S. sclarea, S. dichroantha, Nepeta nuda subsp. nuda and Marrubium astracanicum subsp. macrodon) were evaluated against four parasitic protozoa, i.e. Trypanosoma brucei rhodesiense, T. cruzi, Leishmania donovani and Plasmodium falciparum. The cytotoxic potentials of the extracts on L6 cells were also evaluated. Melarsoprol, benznidazole, miltefosine, chloroquine and podophyllotoxin were used as reference drugs. All crude MeOH extracts showed antiprotozoal potential against at least three parasites, so they were dispersed in water and partitioned against n-hexane and chloroform to yield three subextracts that were screened in the same test systems. The n-hexane extract of N. nuda was the most active against T. brucei rhodesiense while the CHCl3 extracts of S. tomentosa and S. dichroantha showed significant activity against L. donovani. All organic extracts displayed in vitro antimalarial and moderate trypanocidal activities against T. cruzi with the n-hexane extract of S. sclarea being the most active against the latter. The extracts displayed low or no cytotoxicity towards mammalian L6 cells.     

Microfluidic waves

The propagation of pressure waves in fluidic channels with elastic covers is discussed in view of applications to flow control in microfluidic devices. A theory is presented which describes pressure waves in the fluid that are coupled to bending waves in the elastic cover. At low frequencies, the lateral bending of the cover dominates over longitudinal bending, leading to propagating, non-dispersive longitudinal pressure waves in the channel. The theory addresses effects due to both the finite viscosity and compressibility of the fluid. The coupled waves propagate without dispersion, as long as the wave length is larger than the channel width. It is shown that in channels of typical microfluidic dimensions, wave velocities in the range of a few 10 m s(-1) result if the channels are covered by films of a compliant material such as PDMS. The application of this principle to design microfluidic band pass filters based on standing waves is discussed. Characteristic frequencies in the range of a few kHz are readily achieved with quality factors above 30.     

High-throughput protein precipitation and hydrophobic interaction chromatography: salt effects and thermodynamic interrelation

Salt-induced protein precipitation and hydrophobic interaction chromatography (HIC) are two widely used methods for protein purification. In this study, salt effects in protein precipitation and HIC were investigated for a broad combination of proteins, salts and HIC resins. Interrelation between the critical thermodynamic salting out parameters in both techniques was equally investigated. Protein precipitation data were obtained by a high-throughput technique employing 96-well microtitre plates and robotic liquid handling technology. For the same protein-salt combinations, isocratic HIC experiments were performed using two or three different commercially available stationary phases-Phenyl Sepharose low sub, Butyl Sepharose and Resource Phenyl. In general, similar salt effects and deviations from the lyotropic series were observed in both separation methods, for example, the reverse Hofmeister effect reported for lysozyme below its isoelectric point and at low salt concentrations. The salting out constant could be expressed in terms of the preferential interaction parameter in protein precipitation, showing that the former is, in effect, the net result of preferential interaction of a protein with water molecules and salt ions in its vicinity. However, no general quantitative interrelation was found between salting out parameters or the number of released water molecules in protein precipitation and HIC. In other words, protein solubility and HIC retention factor could not be quantitatively interrelated, although for some proteins, regular trends were observed across the different resins and salt types.     

Acetyl Methyl Torsion in N‐Ethylacetamide: A Challenge for Microwave Spectroscopy and Quantum Chemistry

The gas‐phase structures and parameters describing acetyl methyl torsion of N‐ethylacetamide are determined with high accuracy, using a combination of molecular beam Fourier‐transform microwave spectroscopy and quantum chemical calculations. Conformational studies at the MP2 level of theory yield four minima on the energy surface. The most energetically favorable conformer, which possesses C₁ symmetry, is assigned. Due to the torsional barrier of 73.4782(1) cm^?1 of the acetyl methyl group, fine splitting up to 4.9 GHz is found in the spectrum. The conformational structure is not only confirmed by the rotational constants, but also by the orientation of the internal rotor. The ¹⁴N quadrupole hyperfine splittings are analyzed and the deduced coupling constants are compared with the calculated values.     

Characterisation of Taxlllaids A–G; Natural Products from Xenorhabdus indica

Six new lipodepsipeptides and an additional linear derivative named taxlllaids A–G ( 1 – 7 ) have been identified in the entomopathogenic bacterium Xenorhabdus indica. The structures of the main compounds have been solved by detailed NMR spectroscopic analysis and the structures of minor derivatives were elucidated by a combination of labelling experiments and detailed MS experiments. The absolute configuration of the taxlllaids was deduced by using the advanced Marfey method and analysis of the biosynthesis gene cluster showing the presence of epimerisation domains, which was subsequently proved to be correct by solid‐phase peptide synthesis of all taxlllaids. The exchange of a single amino acid in the adenylation domain was shown to be responsible for substrate promiscuity of the third A domain, resulting in the incorporation of leucine, phenylalanine or tyrosine. Bioactivity testing revealed the taxlllaids to be weakly active against Plasmodium falciparum and against a number of eukaryotic cell lines.     

Complex Surface Chemistry of an Otherwise Inert Solvent Molecule: Tetrahydrofuran on Si(001)

The reaction of tetrahydrofuran (THF), an otherwise inert solvent molecule, on Si(001) was experimentally studied in ultra‐high vacuum. Using scanning tunneling microscopy (STM) and photoelectron spectroscopy at variable temperature, we could both isolate a datively bound intermediate state of THF on Si(001), as well as the final configuration that bridges two dimer rows of the Si(001) surface after ether cleavage. The latter configuration implies splitting of the O?C bond, which is typically kinetically suppressed. THF thus exhibits a hitherto unknown reactivity on Si(001).     

Synthesis,Structure, and Optical Properties of Terminally Sulfur‐Functionalized Core‐Substituted Naphthalene‐Bisimide Dyes

The synthesis, characterization, and optical properties of a series of new 2,6‐disubstituted naphthalene‐bisimide dyes as molecular rods comprising terminal AcS groups is reported. The first series of dyes ( 1 – 3 ), comprising phenylhetero (Ph‐X) core substituents, cover a broad range of the VIS spectrum, ranging from yellow ( 2 ) over red ( 3 ) to blue ( 1 ). The second series of dyes contains benzylhetero (Bn‐X) core substituents ( 4 – 7 ). For the same heteroatom connecting the substituent to the naphthalene core, both series were found to display comparable colors. For the second series, the colors were blue ( 4 ), red ( 5 ), and violet ( 6, 7 ). The Ph‐X‐substituted dyes 1 – 3 are nonfluorescent, in contrast to the Bn‐X‐substituted compounds 4 – 7 . This rich variety of optical features that can be adjusted by rather small alterations of the core substituents makes these structurally very comparable molecular rods ideal candidates for optically triggered molecular‐transport investigations. Also, thanks to the terminal AcS groups, these compounds can be placed between nobel‐metal electrodes for optically triggered transport experiments.     

Bioactive Polymers. XXVI. Immobilization of Pepsin on Biozan R

Pepsin was immobilized on BIOZAN R (Hercules) with dicyclohexylcarbodiimide as activator. The reaction product obtained has a protein content of 35–110 mg/g of polymer and a proteolytic activity between 20.85–28.75 μmol tyrosine/L·min·g of polymer). The coupling reaction rate is maximum under the following conditions: pepsin/BIOZAN R ratio = 0.52 g/g, DCCI/BIOZAN R ratio = 0.2 g/g, pH = 3.4, reaction time = 4 h.