Subthreshold antiproton andK − production in heavy ion collisions

Subthreshold ¯p andK ^– and energetic ^– production was studied in Ne + NaF, Cu, Sn and Bi, and in Ni + Ni collisions with incident energies between 1.6 and 2 GeV/u. The measured cross sections indicate a dominant contribution of baryonic resonances. This is also consistent with a generalized scaling behaviour of the cross sections with the energy available in the collision and the energy necessary to produce particles as observed with Ne induced reactions. Deviations from scaling especially pronounced in the Ni-Ni system will be discussed in terms of absorption effects. The flat slope of the excitation function for ¯p production can be related to a reduced production threshold caused by a reduction of the antiproton mass in the dense and heated medium by about 100—150 MeV/c². A similar in-medium mass reduction is also indicated forK ^– mesons. An increased ¯p reabsorption probability for the heavier systems is concluded from the comparison of the ¯p yields in Ne + NaF, Ne + Sn and Ni + Ni collisions.Dedicated to Professor Klaus Dietrich on the occasion of his 60th birthday.     

Coherent and incoherent π0 photoproduction from the deuteron

Differential cross-sections for the reactions d (γ,π⁰)d and d (γ,π⁰)pn have been measured at MAMI with the TAPS detector setup in the energy range 140 MeV < E _γ < 306 MeV. By use of the Glasgow tagging spectrometer an 0.8 MeV energy resolution for photons incident on the target was achieved. The π⁰ missing energy resolution was sufficient for a reliable separation of coherent and incoherent channels. The data for the break-up channel exhibit very strong final state interaction effects, whereas the observed angular dependence of the inclusive process d (γ,π⁰)X is in quantitative agreement with predictions for a quasi-free process. The observed absolute d (γ,π⁰)X cross-sections, on the other hand, are significantly smaller than predicted by the quasi-free process for E _γ >∼ 250 MeV. Associating this failure with the π⁰ photoproduction on the neutron would suggest that its cross-section is up to 25% below the presently believed value. Received: 13 February 2001 / Accepted: 13 April 2001     

Nanotextured multicrystalline Al‐BSF solar cells reaching 18% conversion efficiency using industrially viable solar cell processes

We report recent achievements in adapting industrially used solar cell processes on nanotextured surfaces. Nanostructures were etched into c‐Si surfaces by dry exothermic plasma‐less reaction of F species with Si in atmospheric pressure conditions and then modified using a short post‐etching process. Nanotextured multicrystalline wafers are used to prepare Al‐BSF solar cells using industrially feasible solar cell proc‐ essing steps. In comparison to the reference acidic textured solar cells, the nanostructured cells showed gain in short circuit current (J_sc) of up to 0.8 mA/cm² and absolute gain in conversion efficiency of up to 0.3%. The best nanotextured solar cell was independently certified to reach the conversion efficiency of 18.0%. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Unique continuation results for Ricci curvature and applications

Unique continuation results are proved for metrics with prescribed Ricci curvature in the setting of bounded metrics on compact manifolds with boundary, and in the setting of complete conformally compact metrics on such manifolds. Related to this issue, an isometry extension property is proved: continuous groups of isometries at conformal infinity extend into the bulk of any complete conformally compact Einstein metric. Relations of this property with the invariance of the Gauss–Codazzi constraint equations under deformations are also discussed.     

Direct Minimization of the least-squares spectral element functional – Part I: Direct solver

This paper describes an equivalent but improved least-squares formulation for the numerical approximation of the solution of partial differential equations. Instead of using variational analysis to impose the conditions for minimizing the residual, the residuals are minimized directly, thus leading to a method we will denote by Direct Minimization (DM). DM circumvents setting up the normal equations which consists of matrix–matrix multiplications. Matrix–matrix multiplications are expensive, may lead to loss of accuracy and destroy the sparsity pattern present in the original system. The condition number of the DM formulation is the square root of the condition number which would be obtained if variational analysis was employed. An element-by-element procedure will be presented which allows for parallelization of DM. A computational comparison between DM and the conventional least-squares formulation based on variational analysis will be presented.     

Studies of the out-of-plane emission of pions in symmetric heavy-ion collisions

Triple differential cross-sections of midrapidity pions from ²⁰⁹Bi+²⁰⁹Bi collisions were measured with the Kaon Spectrometer at SIS at incident energies of 400, 700 and 1000 AMeV. The azimuthal emission pattern of the pions has been investigated in dependence of beam energy and impact parameter. An enhanced emission of pions perpendicular to the reaction plane is observed. The strength of the anisotropy increases with beam energy and pion transverse momentum. In contrast to the nucleons the anisotropy varies only little with the impact parameter. No difference in the behaviour of positive and negative pions is observed.     

Entropy minimization and spectral dissimilarity curve resolution technique applied to nuclear magnetic resonance data sets

The use of entropy minimization and spectral dissimilarity is applied to three nuclear magnetic resonance (NMR) data sets. The data sets contain 2, 2, and 3 observables each. It was found that without any a priori information the sets of pure component spectra underlying the NMR spectroscopic observations could be extracted. These successful spectral resolutions suggest that a combined entropy minimization and spectral dissimilarity approach can be further developed for even larger NMR data sets containing a larger number of observables. Brief comparison to DECRA and PMF curve resolution results is also presented.     

Temporal cleaning of a high-energy fiber-based ultrafast laser using cross-polarized wave generation

We report the use of cross-polarized wave generation to perform both pulse shortening and temporal cleaning of a high-energy ytterbium-doped fiber-based femtosecond laser system. The nonlinear processes allow both a highly efficient nonlinear conversion of 20% and a large compression ratio of 3.5, with inherently improved coherent and incoherent contrasts. This results in the generation of 37 μJ, 115 fs pulses at a repetition rate of 100 kHz with high temporal quality.     

Laryngostroboscopic Evaluation After Supracricoid Partial Laryngectomy

BACKGROUND: Supracricoid partial laryngectomy (SCPL) results in laryngeal preservation in more than 95% of patients with T2 glottic carcinoma. Postsurgical glottic function is characterized by an absence of vocal cords, and phonation quality is a key post-SCPL quality-of-life factor. OBJECTIVE: This investigation was designed to enhance post-SCPL vocal function, study anatomic function of the post-SCPL larynx, and correlate anatomic findings with perceptual and instrumented measurements of voice. METHOD: Twenty-five patients were included. All had undergone SCPL with cricoepiglottopexy for T2 glottic carcinoma. All patients were evaluated by laryngostroboscopic examination, voice sample recording, and instrumented voice analysis with the aim of gaining further insight into postoperative larynx function. Laryngostroboscopic parameters such as laryngeal occlusion, epiglottic length, arytenoid movement, and vibratory area were assessed. The perceptual evaluation was based on the GRBAS scale. Acoustic and aerodynamic parameters were recorded, including fundamental frequency (F0), intensity, jitter, shimmer, signal-to-noise ratio (SNR), oral airflow (OAF), maximum phonation time (MPT), and estimated subglottic pressure (ESGP). Nonparametric tests were used to compare laryngostroboscopic parameters with instrumented measurements and perceptual evaluations of voice quality. RESULTS: Correlations were established among occlusion, epiglottic length, and general grade of dysphonia. Oral air flow (P = 0.006) was found to be correlated with occlusion. Voice roughness was correlated with the presence of a clearly identifiable vibratory area (P = 0.003), whereas these vibratory areas were correlated with shimmer (P = 0.041), OAF (P = 0.001), and SNR (P = 0.001). The number of preserved arytenoids was not identified as a voice quality factor (P = 0.423). CONCLUSION: This study highlighted correlations between the laryngostroboscopic examination results and the perceptive and instrumented measurements of voice. Glottis occlusion and epiglottis length were found to be key factors for postoperative voice quality. These results should help to advance technical development on surgical techniques to enhance voice results.     

Theoretical and experimental study of differential group delay and polarization dependent loss of Bragg gratings written in birefringent fiber

In this paper, we completely study the wavelength dependency of differential group delay (DGD) and polarization dependent loss (PDL) for Bragg gratings written in birefringent fibers. Based on the coupled mode theory, we present analytical expressions for the evolution with wavelength of the transmission coefficient, the DGD and the PDL. The wavelength dependencies of these evolutions on the birefringence are then discussed. Experimental results are finally presented for an apodized FBG written in a bow-tie fiber. A very good agreement between theory and experience is reported, confirming the validity of the theoretical analysis.