Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Transfection mediated by gemini surfactants: engineered escape from the endosomal compartment

The structure of the lipoplex formed from DNA and the sugar-based cationic gemini surfactant 1, which exhibits excellent transfection efficiency, has been investigated in the pH range 8.8-3.0 utilizing small-angle X-ray scattering (SAXS) and cryo-electron microscopy (cryo-TEM). Uniquely, three well-defined morphologies of the lipoplex were observed upon gradual acidification: a lamellar phase, a condensed lamellar phase, and an inverted hexagonal (H(II)) columnar phase. Using molecular modeling, we link the observed lipoplex morphologies and physical behavior to specific structural features in the individual surfactant, illuminating key factors in future surfactant design, viz., a spacer of six methylene groups, the presence of two nitrogens that can be protonated in the physiological pH range, two unsaturated alkyl tails, and hydrophilic sugar headgroups. Assuming that the mechanism of transfection by synthetic cationic surfactants involves endocytosis, we contend that the efficacy of gemini surfactant 1 as a gene delivery vehicle can be explained by the unprecedented observation of a pH-induced formation of the inverted hexagonal phase of the lipoplex in the endosomal pH range. This change in morphology leads to destabilization of the endosome through fusion of the lipoplex with the endosomal wall, resulting in release of DNA into the cytoplasm.     

Simple, rapid and selective method using high-performance liquid chromatography for the determination of bretylium in plasma.

A high-performance liquid chromatographic method with ultraviolet detection has been developed for the determination of bretylium in plasma. Following a single-step solid-phase extraction procedure, bretylium is selectively isolated and well recovered from plasma. The assay sensitivity is 0.156 micrograms/ml from 250-microliters plasma samples and its linearity was assessed up to 40 micrograms/ml. The method is accurate (101.0 +/- 5.4%) and precise (maximum coefficient of variation of 8%). It provides a simple and time-saving alternative to existing methods and is particularly suitable for pharmacokinetic studies.     

Efficient and practical Ag-catalyzed cycloadditions between arylimines and the Danishefsky diene

An efficient Ag-catalyzed method for asymmetric addition of the Danishefsky diene to various aryl imines to afford cycloadducts in > or =89% ee and > or =85% isolated yield is reported. Reactions are effected with 0.1-1 mol % catalyst (4 degrees C), and the chiral ligand is readily prepared from commercially available materials, including the inexpensive i-Leu. These catalytic asymmetric cycloadditions can be carried out without the use of solvent or with undistilled THF in air. A first generation supported chiral catalyst that effectively promotes the cycloaddition reaction and can be recycled (five cycles) is described.     

Thermal degradation studies of alkyl-imidazolium salts and their application in nanocomposites

Increasing the thermal stability of organically-modified layered silicates is one of the key points in the successful technical application of polymer-layered silicate nanocomposites on the industrial scale. To circumvent the detrimental effect of the lower thermal stability of alkyl ammonium-treated montmorillonite, a series of alkyl-imidazolium molten salts were prepared and characterized by elemental analysis, thermogravimetry (TGA) and thermal desorption mass spectroscopy (TDMS). The effect of counter ion, alkyl chain length and structural isomerism on the thermal stability of the imidazolium salts was investigated. Alkyl-imidazolium-treated montmorillonite clays were prepared by ion exchange of the imidazolium salts with Na-montmorillonite. These organically-modified clays were characterized by X-ray diffraction (XRD), TDMS and thermogravimetry coupled with Fourier transform infrared spectroscopy (TGA-FTIR), and compared to the conventional quaternary alkyl ammonium montmorillonite. Results indicate that the counter ion has an effect on the thermal stability of the imidazolium salts, and that imidazolium salts with PF₆⁻, N(SO₂CF₃)₂⁻ and BF₄⁻ anions are thermally more stable than the halide salts. A relationship was observed between the chain length of the alkyl group and the thermo-oxidative stability; as the chain length increased from propyl, butyl, decyl, hexadecyl, octadecyl to eicosyl, the stability decreased. The results also show that the imidazolium-treated montmorillonite has greater thermal stability compared to the imidazolium halide. Analysis of the decomposition products by FTIR provides an insight about the decomposition products which are water, carbon dioxide and hydrocarbons.     

Ternary and tetrahedral symmetry in hybrid fluorides, fluoride carbonates and carbonates

Tren amine cations and carbonate anions adopt a ternary symmetry while tetra amine cations are tetrahedral. The symmetry of these constitutive ions influences strongly the nature of the solids which crystallise from solutions. Large fluorinated aluminate polyanions with tetrahedral symmetry appear in the presence of tren amine, while infinite chains of AlF₆ octahedra are observed with tetra amine and that noncentrosymmetric structures are frequently encountered in rare earth fluoride carbonates.     

MIL-50, an open-framework GaPO with a periodic pattern of small water ponds and dry rubidium atoms: a combined XRD,NMR, and computational study

A new fluorinated gallium phosphate, MIL-50, has been synthesized under mild hydrothermal conditions using 1,6-diaminohexane. The chemical formula of MIL-50 is Rb(2)Ga(9)(PO(4))(8)(HPO(4))(OH)F(6).2N(2)C(6)H(18).7H(2)O. The structure is a network of hexameric units of Ga(3)(PO(4))(3)F(2) and Ga(3)(PO(4))(2)(HPO(4))F(3) via corner sharing. It creates a three-dimensional open-framework delimiting 6- and 18-ring channels running along the c axis. The diprotonated 1,6-diaminohexane and water molecules are trapped within the 18-ring pores, whereas the rubidium cations reside in the 6-ring ones. A double quantum (31)P NMR experiment and partial charge calculations indicate that water molecules are present under the form of periodic small clusters, lowering the multiplicity of one phosphorus site, P3. Though water hops within the clusters, the motion leaves the water pattern periodic. Rubidium is so tightly embedded into the framework that water moving in the large 18-ring channels does not reach it, leaving it therefore dry. The crystal framework may be ascribed to the orthorhombic space group Cmc2(1) (n degrees 36), a = 32.1510(2), b = 17.2290(3), c = 10.2120(1) A. The periodic water pattern has a different symmetry than that of the framework. A method has been devised to superpose the two sublattices that coexist in the same unit cell in order to have full occupancy of each site and to perform Madelung summations. This original method is of general interest for most zeolitic materials exhibiting a different symmetry for the framework and the template sublattices.     

Carbon nanodots revised: the thermal citric acid/urea reaction

Luminescent compounds obtained from the thermal reaction of citric acid and urea have been studied and utilized in different applications in the past few years. The identified reaction products range from carbon nitrides over graphitic carbon to distinct molecular fluorophores. On the other hand, the solid, non-fluorescent reaction product produced at higher temperatures has been found to be a valuable precursor for the CO₂-laser-assisted carbonization reaction in carbon laser-patterning. This work addresses the question of structural identification of both, the fluorescent and non-fluorescent reaction products obtained in the thermal reaction of citric acid and urea. The reaction products produced during autoclave–microwave reactions in the melt were thoroughly investigated as a function of the reaction temperature and the reaction products were subsequently separated by a series of solvent extractions and column chromatography. The evolution of a green molecular fluorophore, namely HPPT, was confirmed and a full characterization study on its structure and photophysical properties was conducted. The additional blue fluorescence is attributed to oligomeric ureas, which was confirmed by complementary optical and structural characterization. These two components form strong hydrogen-bond networks which eventually react to form solid, semi-crystalline particles with a size of ∼7 nm and an elemental composition of 46% C, 22% N, and 29% O. The structural features and properties of all three main components were investigated in a comprehensive characterization study.

Products of the thermal reaction of citric acid and urea have been identified as a complex mixture of fluorophores and particles.     

Reducing a chemical master equation by invariant manifold methods

We study methods for reducing chemical master equations using the Michaelis-Menten mechanism as an example. The master equation consists of a set of linear ordinary differential equations whose variables are probabilities that the realizable states exist. For a master equation with s(0) initial substrate molecules and e(0) initial enzyme molecules, the manifold can be parametrized by s(0) of the probability variables. Fraser's functional iteration method is found to be difficult to use for master equations of high dimension. Building on the insights gained from Fraser's method, techniques are developed to produce s(0)-dimensional manifolds of larger systems directly from the eigenvectors. We also develop a simple, but surprisingly effective way to generate initial conditions for the reduced models.     

Substituent control of hydrogen bonding in palladium(II)-pyrazole complexes

Inter- and intramolecular hydrogen bonding of an N-H group in pyrazole complexes was studied using ligands with two different groups at pyrazole C-3 and C-5. At C-5, groups such as methyl, i-propyl, phenyl, or tert-butyl were present. At C-3, side chains L-CH(2)- and L-CH(2)CH(2)- (L = thioether or phosphine) ensured formation of chelates to a cis-dichloropalladium(II) fragment through side-chain atom L and the pyrazole nitrogen closest to the side chain. The significance of the ligands is that by placing a ligating side chain on a ring carbon (C-3), rather than on a ring nitrogen, the ring nitrogen not bound to the metal and its attached proton are available for hydrogen bonding. As desired, seven chelate complexes examined by X-ray diffraction all showed intramolecular hydrogen bonding between the pyrazole N-H and a chloride ligand in the cis position. In addition, however, intermolecular hydrogen bonding could be controlled by the substituent at C-5: complexes with either a methyl at C-5 or no substituent there showed significant intermolecular hydrogen bonding interactions, which were completely avoided by placing a tert-butyl group at C-5. The acidity of two complexes in acetonitrile solutions was estimated to be closer to that of pyridinium ion than those of imidazolium or triethylammonium ions.