Thermodynamic properties of aqueous organic mixtures near the critical demixing: Cases of 2,6-dimethylpyridine and of 2-isobutoxyethanol

Phase diagrams, volumes and heat capacities of aqueous mixtures of 2,6-dimethylpyridine (2,6-L) and 2-isobutoxyethanol (iBE) and activities of 2,6-L in aqueous mixtures were measured in the monophasic region near the lower critical solution temperature (LCST). With 2,6-L some measurement were also made just above the LCST. From the temperature dependence of these data, partial molar relative enthalpies (2,6-L), expansibilities and the temperature derivative of heat capacities were calculated and show that iBE undergoes a microphase transition at low concentration which is not related to the phase separation. On the other hand, the properties of 2,6-L in the water-rich region at temperatures well below the LCST indicates that this solute has only a slight tendency to associate. The heat capacities of 2,6-L show an important increase near the LCST. Such changes are not observed for iBE and other alkoxyethanols and amines since these systems already exist in the form of microphases; the partial molar properties of iBE near the LCST are nearly equal to the molar values of the pure liquid, and the changes in thermodynamic properties corresponding to the macroscopic phase transition, are therefore too small to be measured by the present techniques.     

Effect of molecular weight on the exponential growth and morphology of hyaluronan/chitosan multilayers: a surface plasmon resonance spectroscopy and atomic force microscopy investigation

The layer-by-layer growth of multilayer assemblies of two polysaccharides, the polyanion hyaluronan (HA) and the polycation chitosan (CH), was investigated using atomic force microscopy (AFM) and surface plasmon resonance (SPR) spectroscopy, with primary emphasis on the effect of the polysaccharide molecular weights on the film thickness and surface morphology. The HA/CH multilayers exhibit an exponential increase of the optical film thickness with the number of deposited bilayers. We show that the multilayer thickness at a given stage depends on the size of both CH, the diffusing polyelectrolyte, and HA, the non-diffusing species. Assemblies (12 bilayers) of high molecular weight polysaccharides (HA, 360,000; CH, 160,000) were twice as thick (approximately 900 nm vs approximately 450 nm) as those obtained with low molecular weight polymers (HA, 30,000; CH, 31,000), as assessed by AFM scratch tests. The exponential growth rate is the same for the high and low molecular weight pairs; the larger film thicknesses observed by SPR and by AFM arising from an earlier onset of the steep exponential growth phase in the case of the high molecular weight pair. In all cases, isolated islets form during the deposition of the first CH layer onto the underlying HA. Upon further film growth, individual islets coalesce into larger vermiculate features. The transition from distinct islands to vermiculate structures depends on the molecular weights of the polysaccharides and the lower molecular weight construct presents larger worm-like surface domains than the high molecular weight pair.     

Unraveling Water Structure Inside and Between Nanocapsules

Among Achim Müller's prolific crystal structure database, we have selected two crystalline phases in order to perform a whole and complete characterization of water structure at the nanometer scale. The first chosen example involves the Na₃(NH₄)₁₂[Mo₅₇Fe₆(NO)₆O₁₇₄(OH)₃(H₂O)₂₄] 76H₂O compound synthesized and characterized in 1994. Some very interesting yet unnoticed water clusters may be evidenced in the voids generated by the stacking of the polyanionic units. Among them, we have been able to characterized a pure water crown (H₂O)₁₈, a loose association of three strongly solvated ammonium ions [H₃N–HOH₂]⁺ mediated by two water dimers and one water molecule, a perfectly planar alternating six-member ring [(NH₄)₃(H₂O)₃]³⁺, a puckered chair-shaped hexagonal ring [(NH₄)₂(H₂O)₄]³⁺ and two triangular pyramidal water tetramers (H₂O)₄. It was also shown that the crown and the chair ring was involved through further hydrogen bonding into the formation of a quite novel supramolecular layer modeling the structure of water in contact with a polyelectrolyte. The second example involves the (gua)₃₂[Mo₁₃₂O₃₇₂(H₂O)₇₂(SO₄)₁₀(H₂PO₂)₂₀(gua)₂₀]nH₂O compound synthesized and characterized in 2002. Here, we provide for the first time a complete structural analysis of all the various hydrogen bond patterns encountered in this system. Among them we may cite, an intramolecular web covering the internal cavity, an intramolecular finite system involving the guanidinium cations and the nine-member ring pores of the Mo₁₃₂ shell and a central pure water cluster of one hundred water molecules. In this last case, the evolution of the hydrogen bond strengths on a per H-bond basis or within supramolecular aggregates ([H₂O]₂₀, [H₂O]₄₀, and [H₂O]₁₀₀) is quantitatively studied from standpoints involving both geometry (H–OO bond angles distribution) and energy (partition functions). A survey of other crystalline phases involving water clusters is also presented. It is hoped that the study of these new clusters in a very next future will allow us to solve the well-known water puzzling behaviors.     

2-Cyano Δ3piperideine VII1 : the condensation of 2-cyano Δ3piperideine with sodium dimethylmalonate catalyzed by ZnCl2 or zero valent palladium and platinum complexes

ZnCl₂, Pd (PØ₃)₄ and Pt(PØ₃)₄ were found to be effective catalysts for the condensation of sodium dimethyl malonate with 2-cyano Δ³piperideine $\text{1}$ a–d.     

Rapidly self-deoxygenating controlled radical polymerization in water via in situ disproportionation of Cu(i)

Rapidly self-deoxygenating Cu-RDRP in aqueous media is investigated. The disproportionation of Cu(i)/Me₆Tren in water towards Cu(ii) and highly reactive Cu(0) leads to O₂-free reaction environments within the first seconds of the reaction, even when the reaction takes place in the open-air. By leveraging this significantly fast O₂-reducing activity of the disproportionation reaction, a range of well-defined water-soluble polymers with narrow dispersity are attained in a few minutes or less. This methodology provides the ability to prepare block copolymers via sequential monomer addition with little evidence for chain termination over the lifetime of the polymerization and allows for the synthesis of star-shaped polymers with the use of multi-functional initiators. The mechanism of self-deoxygenation is elucidated with the use of various characterization tools, and the species that participate in the rapid oxygen consumption is identified and discussed in detail.

The rapidly self-deoxygenating Cu-RDRP in aqueous media is investigated.     

Anionic copper complex fragmentations from enkephalins under low-energy collision-induced dissociation in an ion trap mass spectrometer

Peptide metallation with Cu2+ was explored in the negative ESI mode using an ion trap mass spectrometer. Under these conditions, the [(M-3H) + CuII]- species formed were investigated under low-energy collision-induced dissociation conditions. MS2 experiments indicate a very different behavior of CuII metallated complexes compared with [M-H]- species. CuII induces an easy loss of CO2 and specific side-chain cleavages (by radical losses) at the C-terminal residue, as observed previously by prompt 'in source' dissociation experiments. The loss of CO2 yields an unstable carbylide that leads to further dissociations involving the migration of a proton or a hydrogen radical (through the reduction of CuII). Multistage MS3 experiments were carried out to rationalize this behavior. Fragmentation pathways are proposed in order to explain the product ions observed. The side-chain radical loss at the C-terminus was demonstrated to be a consecutive process. Finally, evidence is provided that the specific side-chain cleavages can be used for the differentiation of Leu/Ile and Gln/Lys residues when they are located at the C-terminus. The existence of a zwitterionic form in the case of the anionic YGGFK-CuII complex is proposed.     

Synthesis and properties of fluorous arenes and triaryl phosphorus compounds with branched fluoroalkyl moieties (“split pony tails”)

Most compounds designed for immobilization in fluorous media feature linear pony tails of the formula (CH₂)_m(CF₂)_n−1CF₃ [(CH₂)_mR_fn]. This paper presents a first-generation approach to compounds with branched or “split” pony tails of the formula (CH₂)_lCH[(CH₂)_mR_fn]₂. Allyl tri(n-butyl)tin is reacted twice with perfluorooctyl iodide (R_f8I; first, photochemical, 78-81%; second, thermal with radical initiator, 71%; 13-18 g scales) to give the secondary alkyl iodide ICH(CH₂R_f8)₂ (3). A subsequent Ni(Cl)₂(PPh₃)₂-catalyzed reaction with allyl tri(n-butyl)tin yields the branched alkene H₂CCHCH₂CH(CH₂R_f8)₂ (74%). A palladium-catalyzed Heck coupling with OP(p-C₆H₄Br)₃ gives the fluorous phosphine oxide OP(p-C₆H₄CHCHCH₂CH(CH₂R_f8)₂)₃ (84%), and Pd/C-catalyzed hydrogenation affords OP(p-C₆H₄(CH₂)₃CH(CH₂R_f8)₂)₃ (>99%). Reduction with SiHCl₃ gives P(p-C₆H₄(CH₂)₃CH(CH₂R_f8)₂)₃, which is protected as the air-stable borane adduct H₃B·P(p-C₆H₄(CH₂)₃CH(CH₂R_f8)₂)₃ (9, 64%). The CF₃C₆F₁₁/toluene partition coefficient of 9 is much higher than that of the analog with p-(CH₂)₃R_f8 groups (96.6:3.4 versus 37.3:62.7). The iodide 3 is unreactive towards PAr₃ at 175-250 °C. However, a CuBr-catalyzed reaction with C₆H₅MgBr gives C₆H₅CH(CH₂R_f8)₂, which also exhibits a high partition coefficient (97.9:2.1).     

Oxidation reactions of an anionic gallium(I) N-heterocyclic carbene analogue with group 16 compounds

The reactivity of an anionic gallium(I) heterocycle, [K(tmeda)][:Ga([N(Ar)C(H)]2)], Ar = C6H3Pr(i)2-2,6, towards sources of elemental chalcogens and diorgano-dichalcogenides has been investigated and comparisons drawn with the reactivity of the valence isoelectronic N-heterocyclic carbene class of ligand. The reactions of the heterocycle with N2O or (Te)PEt3 yielded the dimeric, dianionic gallium(III) complexes, [K(L)]2[(mu-E)Ga([N(Ar)C(H)]2)]2, E = O, L = tmeda; E = Te, L = THF. Treatment of [K(tmeda)][:Ga([N(Ar)C(H)]2)] with the diphenyl dichalcogenides, PhEEPh, E = Se or Te, gave the one dimensional polymer, [K[(PhSe)2Ga([N(Ar)C(H)]2)]]infinity and the monomeric complex, [K(OEt2)3][(PhTe)2Ga([N(Ar)C(H)]2)], respectively. The X-ray crystal structures of the four complexes are reported.     

Determination of manganese in brain samples by slurry sampling graphite furnace atomic absorption spectrometry

A simple procedure for the determination of manganese in different sections of human brain samples by graphite furnace atomic absorption spectrometry has been developed. Brain sections included cerebellum, hypothalamus, frontal cortex, vermix and encephalic trunk. Two sample preparation procedures were evaluated, namely, slurry sampling and microwave-assisted acid digestion. Brain slurries (2% w/v) could be prepared in distilled, de-ionized water, with good stability for up to 30 min. Brain samples were also digested in a domestic microwave oven using 5 ml of concentrated HNO₃. A mixed palladium+magnesium nitrate chemical modifier was used for thermal stabilization of the analyte in the electrothermal atomizer up to pyrolysis temperatures of 1300 °C, irrespective of the matrix. Quantitation of manganese was conducted in both cases by means of aqueous standards calibration. The detection limits were 0.3 and 0.4 ng ml⁻¹ for the slurry and the digested samples, respectively. The accuracy of the procedure was checked by comparing the results obtained in the analysis of slurries and digested brain samples, and by analysis of the NIST Bovine Liver standard reference material (SRM 1577a). The ease of slurry preparation, together with the conventional set of analytical and instrumental conditions selected for the determination of manganese make such methodology suitable for routine clinical applications.     

Determination of clindamycin in animal plasma by high-performance liquid chromatography combined with electrospray ionization mass spectrometry

A method for the quantification of clindamycin in animal plasma using high-performance liquid chromatography combined with electrospray ionization mass spectrometry (LC/ESI-MS/MS) is presented. Lincomycin is used as the internal standard. The sample preparation includes a simple deproteinization step with trichloroacetic acid. Chromatographic separation is achieved on an RP-18 Hypersil column using gradient elution with 0.01 M ammonium acetate and acetonitrile as mobile phase. Good linearity was observed in the range 0-10 microg ml(-1). The limit of quantification of the method is 50 ng ml(-1) and the limit of detection is 1.3 ng ml(-1). The method was shown out to be of use for pharmacokinetic studies of clindamycin formulations in dogs.